TT3354: Technology of PreSpinning Process syllabus for HT 2021 regulation

Technology of PreSpinning Process detailed syllabus for Handloom & Textile Technology (HT) for 2021 regulation curriculum has been taken from the Anna University official website and presented for the HT students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.

For Handloom & Textile Technology 3rd Sem scheme and its subjects, do visit HT 3rd Sem 2021 regulation scheme. The detailed syllabus of technology of prespinning process is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION TO SPINNING 9 Sequence of spinning machinery for producing carded, combed and blended yarns in short staple and long staple spinning system; yarn numbering systems- direct, indirect and conversions; influence of characteristics of raw material – fibre fineness, length, strength, elongation, stiffness, fibre friction, cleanliness on spinning performance; spinnability

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

CARDING 9 Objectives and principle of carding; detailed study of flat card; autolevelling; card clothing and its maintenance; drives and production calculation

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

DRAWING AND ROVING 9 Tasks of drawing machine; drafting systems used in modern drawing machines; autolevelling; draft and production calculation; objectives of roving machine; working of roving machine; bobbin builder mechanism – mechanical and electro-mechanical; draft, twist and production calculations.

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Klein W., Vol. 1-3, The Technology of Short Staple Spinning, A Practical Guide to Opening & Carding and A Practical Guide to Combing, Drawing, and Roving frame, The Textile Institute, Manchester, U.K., 1998.
2. Chattopadhyay R. (Ed), Advances in Technology of Yarn Production, NCUTE, IIT Delhi, 2002.
3. Klein W., Vol.4 -5, A Practical Guide to Ring Spinning, 1987 and New Spinning Systems, 1993″ The Textile Institute, Manchester, 1987.
4. Gowda R.V.M, New Spinning Systems, NCUTE, IIT Delhi, 2003.

Reference Books:

1. Oxtoby E., Spun Yarn Technology , Butterworth, London, 1987
2. Klein W., The Technology of Short-staple Spinning , The Textile Institute, Manchester, 1998
3. Klein W., A Practical Guide to Opening and Carding , The Textile Institute, Manchester, 1999
4. Klein W., A Practical Guide to Combing, Drawing and Roving Frame , The Textile Institute, Manchester, 1999
5. Lord P.R., Yarn Production: Science, Technology and Economics , The Textile Institute, Manchester, 1999
6. Salhotra K.R. and Chattopadhyay R., Book of papers on Blowroom and Card , Indian Institute of Technology, Delhi, 1998 41
7. Iredale J., Yarn Preparation: A Handbook , Intermediate Technology, 1992
8. Doraiswamy I., Chellamani P. and Pavendhan A., Cotton Ginning, Textile Progress, The Textile Institute, Manchester, 1993.

For detailed syllabus of all other subjects of Handloom & Textile Technology, 2021 regulation curriculum do visit HT 3rd Sem subject syllabuses for 2021 regulation.

For all Handloom & Textile Technology results, visit Anna University HT all semester results direct link.