Engineering Practices Laboratory detail syllabus for Industrial Engineering & Management (Ind Engg & Mang), 2017 regulation is taken from Anna University official website and presented for students of Anna University. The details of the course are: course code (GE8261), Category (ES), Contact Periods/week (4), Teaching hours/week (0), Practical Hours/week (0). The total course credits are 4.
For all other ind engg & mang 2nd sem syllabus for be 2017 regulation anna univ you can visit Ind Engg & Mang 2nd Sem syllabus for BE 2017 regulation Anna Univ Subjects. The detail syllabus for engineering practices laboratory is as follows.”
Course Objective:
- To provide exposure to the students with hands on experience on various basic engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.
Group a (Civil and Mechanical)
I Civil Engineering Practice
Buildings:
- Study of plumbing and carpentry components of residential and industrial buildings. Safety aspects.
Plumbing Works:
- Study of pipeline joints, its location and functions: valves, taps, couplings, unions, reducers, elbows in household fittings.
- Study of pipe connections requirements for pumps and turbines.
- Preparation of plumbing line sketches for water supply and sewage works.
- Hands-on-exercise:
- Demonstration of plumbing requirements of high-rise buildings.
Basic pipe connections – Mixed pipe material connection – Pipe connections with different joining components.
Carpentry Using Power Tools Only:
- Study of the joints in roofs, doors, windows and furniture.
- Hands-on-exercise:
Wood work, joints by sawing, planing and cutting.
II Mechanical Engineering Practice
Welding:
- Preparation of butt joints, lap joints and T- joints by Shielded metal arc welding.
- Gas welding practice
Basic Machining:
- Simple Turning and Taper turning
- Drilling Practice
Sheet Metal Work:
- Forming and Bending:
- Model making – Trays and funnels.
- Different type of joints.
Machine Assembly Practice:
- Study of centrifugal pump
- Study of air conditioner
Demonstration On:
- Smithy operations, upsetting, swaging, setting down and bending. Example -Exercise – Production of hexagonal headed bolt.
- Foundry operations like mould preparation for gear and step cone pulley.
- Fitting – Exercises – Preparation of square fitting and V – fitting models.
Group B (Electrical and Electronics)
III Electrical Engineering Practice
- Residential house wiring using switches, fuse, indicator, lamp and energy meter.
- Fluorescent lamp wiring.
- Stair case wiring
- Measurement of electrical quantities – voltage, current, power and power factor in RLC circuit.
- Measurement of energy using single phase energy meter.
- Measurement of resistance to earth of an electrical equipment.
IV Electronics Engineering Practice
- Study of Electronic components and equipments – Resistor, colour coding measurement of AC signal parameter (peak-peak, rms period, frequency) using CR.
- Study of logic gates AND, OR, EX-OR and NOT.
- Generation of Clock Signal.
- Soldering practice – Components Devices and Circuits – Using general purpose PCB.
- Measurement of ripple factor of HWR and FWR.
Course Outcome:
On successful completion of this course, the student will be able to
- fabricate carpentry components and pipe connections including plumbing works.
- use welding equipments to join the structures.
- Carry out the basic machining operations
- Make the models using sheet metal works
- Illustrate on centrifugal pump, Air conditioner, operations of smithy, foundary and fittings
- Carry out basic home electrical works and appliances
- Measure the electrical quantities
- Elaborate on the components, gates, soldering practices.
List of Equipment for a Batch of 30 Students:
Civil
- Assorted components for plumbing consisting of metallic pipes, plastic pipes, flexible pipes, couplings, unions, elbows, plugs and other fittings. 15 Sets.
- Carpentry vice (fitted to work bench) 15 Nos.
- Standard woodworking tools 15 Sets.
- Models of industrial trusses, door joints, furniture joints 5 each
- Power Tools:
- Rotary Hammer 2 Nos
- Demolition Hammer 2 Nos
- Circular Saw 2 Nos
- Planer 2 Nos
- Hand Drilling Machine 2 Nos
- Jigsaw 2 Nos
Mechanical
- Arc welding transformer with cables and holders 5 Nos.
- Welding booth with exhaust facility 5 Nos.
- Welding accessories like welding shield, chipping hammer, wire brush, etc. 5 Sets.
- Oxygen and acetylene gas cylinders, blow pipe and other welding outfit. 2 Nos.
- Centre lathe 2 Nos.
- Hearth furnace, anvil and smithy tools 2 Sets.
- Moulding table, foundry tools 2 Sets.
- Power Tool: Angle Grinder 2 Nos
- Study-purpose items: centrifugal pump, air-conditioner One each.
Electrical
- Assorted electrical components for house wiring 15 Sets
- Electrical measuring instruments 10 Sets
- Study purpose items: Iron box, fan and regulator, emergency lamp 1 each
- Megger (250V/500V) 1 No.
- Power Tools:
- Range Finder 2 Nos
- Digital Live-wire detector 2 Nos
Electronics
- Soldering guns 10 Nos.
- Assorted electronic components for making circuits 50 Nos.
- Small PCBs 10 Nos.
- Multimeters 10 Nos.
- Study purpose items: Telephone, FM radio, low-voltage power supply
For detail syllabus of all other subjects of BE Ind Engg & Mang, 2017 regulation do visit Ind Engg & Mang 2nd Sem syllabus for 2017 Regulation.
Dont forget to download iStudy for latest syllabus and results, class timetable and more.