Strength of Materials and Fluid Mechanics and Machinery Laboratory detail syllabus for Mech & Auto (Mech & Auto), 2017 regulation is taken from Anna University official website and presented for students of Anna University. The details of the course are: course code (CE8381), Category (ES), Contact Periods/week (4), Teaching hours/week (0), Practical Hours/week (0). The total course credits are 4.
For all other mech & auto 4th sem syllabus for be 2017 regulation anna univ you can visit Mech & Auto 4th Sem syllabus for BE 2017 regulation Anna Univ Subjects. The detail syllabus for strength of materials and fluid mechanics and machinery laboratory is as follows.”
Course Objective:
- To study the mechanical properties of materials when subjected to different types of loading.
- To verify the principles studied in Fluid Mechanics theory by performing experiments in lab.
Strength of Materials
List of Experiments:
- Tension test on a mild steel rod
- Double shear test on Mild steel and Aluminum rods
- Torsion test on mild steel rod
- Impact test on metal specimen
- Hardness test on metals – Brinnell and Rockwell Hardness Number
- Deflection test on beams
- Compression test on helical springs
- Strain Measurement using Rosette strain gauge
- Effect of hardening- Improvement in hardness and impact resistance of steels.
- Tempering- Improvement Mechanical properties Comparison
- Unhardened specimen
- Quenched Specimen and
- Quenched and tempered specimen.
- Microscopic Examination of
- Hardened samples and
- Hardened and tempered samples.
Course Outcome:
- Ability to perform Tension, Torsion, Hardness, Compression, and Deformation test on Solid materials.
List of Equipment for Batch of 30 Students
S.No. Name of the Equipment Qty.
- Universal Tensile Testing machine with double 1 shear attachment -40 Ton Capacity 1
- Torsion Testing Machine (60 NM Capacity) 1
- Impact Testing Machine (300 J Capacity) 1
- Brinell Hardness Testing Machine 1
- Rockwell Hardness Testing Machine 1
- Spring Testing Machine for tensile and compressive loads (2500 N) 1
- Metallurgical Microscopes 3
- Muffle Furnace (800 C) 1
Fluid Mechanics and Machines Laboratory
List of Experiments:
- Determination of the Coefficient of discharge of given Orifice meter.
- Determination of the Coefficient of discharge of given Venturi meter.
- Calculation of the rate of flow using Rota meter.
- Determination of friction factor for a given set of pipes.
- Conducting experiments and drawing the characteristic curves of centrifugal pump / submergible pump
- Conducting experiments and drawing the characteristic curves of reciprocating pump.
- Conducting experiments and drawing the characteristic curves of Gear pump.
- Conducting experiments and drawing the characteristic curves of Pelton wheel.
- Conducting experiments and drawing the characteristics curves of Francis turbine.
- Conducting experiments and drawing the characteristic curves of Kaplan turbine.
Course Outcome:
Upon completion of this course, the students will be able to:
- Perform Tension, Torsion, Hardness, Compression, and Deformation test on Solid materials.
- Use the measurement equipments for flow measurement.
- Perform test on different fluid machinery.
List of Equipment for a Batch of 30 Students
S. No. Name of the Equipment Qty.
- Orifice meter setup 1
- Venturi meter setup 1
- Rotameter setup 1
- Pipe Flow analysis setup 1
- Centrifugal pump/submergible pump setup 1
- Reciprocating pump setup 1
- Gear pump setup 1
- Pelton wheel setup 1
- Francis turbine setup 1
- Kaplan turbine setup 1
For detail syllabus of all other subjects of BE Mech & Auto, 2017 regulation do visit Mech & Auto 4th Sem syllabus for 2017 Regulation.
Dont forget to download iStudy for latest syllabus and results, class timetable and more.