Sensors and Instrumentation Laboratory Mechatronics 5th Sem Syllabus for BE 2017 Regulation Anna Univ

Sensors and Instrumentation Laboratory detail syllabus for Mechatronics Engineering (Mechatronics), 2017 regulation is taken from Anna University official website and presented for students of Anna University. The details of the course are: course code (MT8512), Category (PC), Contact Periods/week (4), Teaching hours/week (0), Practical Hours/week (0). The total course credits are 4.

For all other mechatronics 5th sem syllabus for be 2017 regulation anna univ you can visit Mechatronics 5th Sem syllabus for BE 2017 regulation Anna Univ Subjects. The detail syllabus for sensors and instrumentation laboratory is as follows.”

Course Objective:

• To provide knowledge about sensors and actuators
• To provide hands on experience to measure different signal using sensor and processing them in required form.

List of Experiments:

1. Design and testing of Digital Comparator
2. Design and testing of Voltage to frequency converter and frequency to voltage converter.
3. Design and testing of sample and hold circuit.
4. Design and testing of Flash type Analog to Digital Converters.
5. Design and testing of instrumentation amplifier using OP-AMP.
6. Displacement measurement using potentiometer and LVDT and plotting the characteristic curves.
7. Study of Characteristics and calibration of strain gauge and Load Cell
1. Measurement of strain using resistive type strain gauges with temperature compensation and various bridge configurations.
8. Temperature measurement using Thermocouple, Thermistor and RTD and comparing the characteristics.
9. Comparison of capacitive and resistive type transducer for humidity measurement with their characteristics.
10. Measurement of sound using microphones and sound level meter.
11. Conversation of time domain audio signal into frequency domain signal (FFT).
12. Measurements of 3 phase power and power factor.

Course Outcome:

Upon Completion of the course the students will be able to:

• CO1 Generate appropriate design procedure, suitable for signal conversion to interface with computer.
• CO2 Design appropriate circuits by using conventional formulas used in signal conditioning and conversion.
• CO3 Implement their design in bread board and test it.
• CO4 Generate appropriate design procedure to obtain a required measurement data for temperature, force, humidity, displacement and sound.
• CO5 Log the data in computer using LABVIEW/ MATLAB/PSILAB.
• CO6 Present data in a clear and meaningful manner.
• CO7 Use transducers to create simple Mechatronics applications using data logging software.

Equipments for a Batch of 30 Students

Sl.No Name of the Equipment Qty.

1. Digital Signal Oscilloscope 6
2. Function Generator 5
3. Breadboard 10
4. Regulated Power supply 6
5. LVDT 1
6. Thermistor 1
7. Thermocouple 1
8. RTD 1
9. Load cell setup 1
10. 4 Channel data acquisition system for strain gauge 1
11. Sound level meter 1
12. Computer with LABVIEW/ MATLAB/SCILAB 1
13. Prony brake dynamometer 1
14. Hygrometer 1

For detail syllabus of all other subjects of BE Mechatronics, 2017 regulation do visit Mechatronics 5th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.