Plane and Geodetic Surveying Laboratory detail syllabus for Geoinformatics Engineering (Geo), 2017 regulation is taken from Anna University official website and presented for students of Anna University. The details of the course are: course code (GI8311), Category (PC), Contact Periods/week (4), Teaching hours/week (0), Practical Hours/week (0). The total course credits are 4.
For all other geo 3rd sem syllabus for be 2017 regulation anna univ you can visit Geo 3rd Sem syllabus for BE 2017 regulation Anna Univ Subjects. The detail syllabus for plane and geodetic surveying laboratory is as follows.”
Course Objective:
- To familiarize with the various surveying instruments and methods.
Exercises:
- Chain traversing
- Compass traversing
- Plane table surveying – Method of intersection
- Plane table surveying – Three point problem(any one method)
- Plane table surveying – Two point problem
- Plane table traversing
- Fly leveling using dumpy/tilting level
- Check leveling using dumpy/tilting level
- Measurement of horizontal and vertical angles using theodolite.
- Determination of tacheometric constants using horizontal and inclined line of sight.
- To determine the elevation of an object using single plane method when base is accessible and inaccessible
- To determine the distance and difference in elevation between two inaccessible points using double plane method.
- Heights and distances by stadia and tangential tacheometry
- Theodolite traversing
- Extra meridian observation to determine azimuth (Demonstration only).
Course Outcome:
- At the end of the course the student will be able to use various surveying instruments like chain, compass, plane table, level and theodolite for mapping.
References:
- T.P.Kanetkar and S.V.Kulkarni, Surveying and Levelling, Parts1 and 2, Pune Vidyarthi Griha Prakashan, Pune, 2008
- Dr.B.C.Punmia, Ashok K.Jain and Arun K Jain, Surveying Vol.I and II, Lakshmi Publications Pvt Ltd, New Delhi, 2005
- James M. Anderson and Edward M. Mikhail, Surveying, Theory and Practice, Seventh Edition, Mc Graw Hill 2001
- Bannister and S. Raymond, Surveying, Seventh Edition, Longman 2004
- David Clark, Plane and Geodetic Surveying for Engineers, Volume I, Constable and Company Ltd, London, 1952
- David Clark and James Clendinning, Plane and Geodetic Surveying for Engineers, Volume II, Constable and Company Ltd, London, 1958
- S.K. Roy, Fundamentals of Surveying, Second Edition, Prentice Hall of India 2004
- K.R. Arora, Surveying Vol I and II, Standard Book house , Tenth Edition,2008
Instruments Required for a Batch of 30
- Metric Chain – 15 Nos.
- Cross Staff – 15 Nos.
- Metallic tape (30 m length) – 15 Nos.
- Steel arrows – 150 Nos.
- Prismatic Compass – 15 Nos.
- Plane table with accessories – 15 Nos.
- Dumpy level – 15 Nos.
- Tilting level – 15 Nos.
- Levelling Staff – 15 Nos.
- Theodolite – 15 Nos.
- Ranging rod – 150 Nos.
For detail syllabus of all other subjects of BE Geo, 2017 regulation do visit Geo 3rd Sem syllabus for 2017 Regulation.
Dont forget to download iStudy for latest syllabus and results, class timetable and more.