MF3311: Strength of Materials and Metallurgy Laboratory syllabus for Manuf 2021 regulation

Strength of Materials and Metallurgy Laboratory detailed syllabus for Manufacturing Engineering (Manuf) for 2021 regulation curriculum has been taken from the Anna University official website and presented for the Manuf students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.

For Manufacturing Engineering 3rd Sem scheme and its subjects, do visit Manuf 3rd Sem 2021 regulation scheme. The detailed syllabus of strength of materials and metallurgy laboratory is as follows.

Course Objectives:

• To study the mechanical properties of materials when subjected to different types of loading.
• To impart practical knowledge of heat treatment processes.
• To elaborate the effect of various parameters on heat treatment process
• To get conversant with the microstructural changes
• To gain practical knowledge on heat treatment of various materials.

List of Experiments:

A) Strength of Materials Laboratory

1. Tension test on a mild steel rod
2. Double shear test on Mild steel and Aluminium rods
3. Torsion test on mild steel rod
4. Impact test on metal specimen
5. Hardness test on metals – Brinell and Rockwell Hardness Number
6. Deflection test on beams
7. Compression test on helical springs
8. Strain Measurement using Rosette strain gauge
9. Effect of hardening- Improvement in hardness and impact resistance of steels.
10. Tempering- Improvement Mechanical Properties Comparison
    1. Unhardened specimen
    2. Quenched Specimen and
    3. Quenched and tempered specimen.
11. Microscopic Examination of
    1. Hardened samples and
    2. Hardened and tempered samples.

B) Metallurgy Laboratory

1. Specimen preparation for macro – examination.
2. Specimen preparation for micro examination and study of Micro structure of –
   1. Carbon steel s(High, Medium, and Low)
   2. Cast Iron (Gray, White, Nodular, Malleable)
   3. Brass (70/30), Bronze (tin bronze), Al-Si alloy, Cupro-nickel, Ti alloy.
3. Quantitative metallography – Estimation of volume fraction, particle size, size distribution, and shape.
4. Cooling curves
   1. Pure Metal (Pb or Sn)
   2. Alloy (Pb-Sn or Pb-Sb)
5. study the micro structure before and after the following heat treatments
   1. Annealing
   2. Normalizing
   3. Quench Hardening
   4. Tempering
6. Jominy End Quench Test

For detailed syllabus of all other subjects of Manufacturing Engineering, 2021 regulation curriculum do visit Manuf 3rd Sem subject syllabuses for 2021 regulation.

For all Manufacturing Engineering results, visit Anna University Manuf all semester results direct link.