Basics of Chemical Engineering detailed syllabus for Ceramic Technology (Ceramic Tech) for 2019 regulation curriculum has been taken from the Anna Universities official website and presented for the Ceramic Tech students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.
For Ceramic Technology 2nd Sem scheme and its subjects, do visit Ceramic Tech 2nd Sem 2019 regulation scheme. The detailed syllabus of basics of chemical engineering is as follows.
Course Objective:
For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Unit I
Fluid Statics and Fluid Flow Phenomena
Fluid statics – hydrostatic equilibrium, applications of fluid statics – manometer, gravity and centrifugal decanter.Fluid flow phenomena – laminar flow, rheological properties of fluids, turbulence, boundary layers.
Unit II
For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Conductive and Convective Heat Transfer
Conductive heat transfer – basic laws of conduction, steady state conduction, unsteady state conduction. Convective heat transfer – typical heat transfer equipments, energy balance, heat flux and heat transfer coefficient, heat transfer by forced convection in laminar flow, turbulent flow and transition region between laminar and turbulent flow, natural convection.
Unit IV
For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit V
Basics of Mass Transfer Operations
Diffusion – definition, prediction of diffusivities. Humidification operation – definition, humidity chart, wet bulb temperature. Drying of solids – classification of dryers, solids handling in dryer, principles of drying, cross circulation drying, through circulation drying, freeze drying, drying equipments for solids, pastes, solutions and slurries. Crystallization – crystal geometry, super saturation, mechanism of crystallization.
Course Outcome:
For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Text Books:
- Warren L.McCabe, Julian C.Smith and Peter Harriott, Unit Operations of Chemical Engineering, 7th Edn., McGraw Hill International Edition,2013
- SalilK.Ghosal, ShyamalK.Sanyal and Siddhartha Datta, Introduction to Chemical Engineering, Tata McGraw-Hill Publishing Co. Ltd., New Delhi,2011.
- Richardson J F,Coulson J. M.,BackhurstJ R,HarkerJ H, Chemical Engineering, Volume 1, Sixth edition(Fluid Flow, Heat Transfer and Mass Transfer), Elsevier, 1999.
References:
- Perry R.H and Green D (eds), Perry”s Chemical Engineers” Handbook, 6th Edn.,McGraw-Hill, New York,1984.
- Walas S.M, Chemical Process Equipment, Butterworths,1988.
- Treybal R.E, Mass Transfer Operations, 3rd Edn., McGraw-Hill, New York,1980.
- David Shallcross, Chemical Engineering Explained: Basic Concepts for Novices, CPI Group, UK, 2013
- David M.H, James B. Riggs,Basic Principles and Calculations in Chemical Engineering, 8th edition, Prentice Hall,2012.
For detailed syllabus of all other subjects of Ceramic Technology, 2019 regulation curriculum do visit Ceramic Tech 2nd Sem subject syllabuses for 2019 regulation.
For all Ceramic Technology results, visit Anna University Ceramic Tech all semester results direct link.