Cad-Cam-Cae for Plastics Engineering detail syllabus for Plastic Technology (Plastic Tech), 2017 regulation is taken from Anna University official website and presented for students of Anna University. The details of the course are: course code (PL8602), Category (PC), Contact Periods/week (3), Teaching hours/week (3), Practical Hours/week (0). The total course credits are given in combined syllabus.
For all other plastic tech 6th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 6th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. The detail syllabus for cad-cam-cae for plastics engineering is as follows.”
Course Objective:
To enable the students
- To provide an overview of how computers are being used in Design of Plastic Component, Manufacturing of Tool and Analysis of mould flow.
- To develop the knowledge of computer aided manufacturing.
Unit I
For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.
Unit II
Surface Modeling and Solid Modeling
Surface modeling: Bezier and B-Spline surface- Bi- linear surface- Boundary RepresentationSweep representation.
Solid modeling: Primitives- Boolean set operations- Boundary Representation – Constructive Solid Geometry, User interface for solid modeling, Introduction to Parametric and Variation modeling, Creation of prismatic and lofted parts based on software packages.
Assembly Modeling: Assembly of parts, Tolerance analysis, Mass property calculations, and Interference Checking
Unit III
Computer Aided Manufacturing
Integrating CAD with CAM – NC – CNC – DNC- NC programming – Basics, Languages, G Codes and M Codes and APT – Part programming for CNC Turning Center and CNC Machining Center- CAM software packages -Tool Path generation and verification.
Unit IV
For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.
Unit V
Cae – Flow Analysis
Mold Flow Analysis: Introduction – Product design and Mold flow – Sequence of analysis- Mold flow concepts- Meshes used in Mold flow analysis- Types, Requirement- Geometry CreationImporting Geometry- 3D Modelling using MF/view- Mold flow design procedure- Analysis steps framework- Evaluate an Initial design- optimized the design-
Types of Analysis: Flow analysis- Cooling analysis – Shrink/Warp analysis – Stress analysisCase studies – Interpretation of results – Part defects
Course Outcome:
- Upon completion of this course, the students will acquire the knowledge of computer aided design and manufacturing for moulds for plastics processing.
- Knowledge on various CNC machining processes used in Mould manufacturing.
- They also learn about various types of analysis involved in Mould flow.
Text Books:
- Ibrahim Zeid Mastering CAD CAM Tata McGraw-Hill Publishing Co., 2007
References:
- Chris McMahon and Jimmie Browne CAD/CAM Principles”, “Practice and Manufacturing management Second Edition, Pearson Education.
- P.RadhaKrishnan, S.Subramanyan, V.Raju, CAD/CAM/CIM, Third Edition, New Age International Publisher
- Donald Hearn and M. Pauline Baker Computer Graphics. Prentice Hall, Inc, 1992.
- Rao P N, Tiwari N K, Kundra T, Computer Aided Manufacturing Tata McGraw Hill 2014.
- Seshu.P, Text book of Finite Element Analysis PHI learning Private limited, 2008.
- Jay Shoemaker Moldflow Design Guide: A Resource for Plastics Engineers, Volume 10, Hanser, 2006
For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 6th Sem syllabus for 2017 Regulation.
Dont forget to download iStudy for latest syllabus and results, class timetable and more.