Measurement, Instrumentation and Refrigeration Laboratory Syllabus for B.Tech 5th sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.
The detailed syllabus for Measurement, Instrumentation and Refrigeration Laboratory B.Tech (R13) fifthsem is as follows
OBJECTIVES:
To impart knowledge on the use of Measuring Techniques ,Measuring equipments and Instruments and the Operation of Refrigeration plant
(A) MEASUREMENTS LABORATORY [25 hours]
Use of precision measuring instruments like micrometer, vernier, height and depth gauges, surface plate, etc.
Checking dimensions of a part using slip gauge.
Use of sine bar for measuring angles and tapers.
Measurement of tooth thickness by gear tooth vernier.
Calibration of dial gauge.
Taper and bore measurement-using spheres.
Fundamental dimension of a gear using contour projector.
Testing squareness of a try square using slip gauges.
Checking straightness of a surface plate using autocollimator.
Measurement of angles between centre lines of holes drilled radially on a shaft.
Measurements of thread parameters using floating carriage micrometer.
Use of pneumatic comparator and mechanical comparator.
(B) INSTRUMENTATION LABORATORY [20 hours]
[TOTAL: 60 PERIODS]
OUTCOMES: On completion of the experiments in this laboratory course the students are expected to have the knowledge and skills in
- using the Different types of measuring equipments instruments
- Method of measurements using the instruments
- Power measurement using rope, prony brake, mechanical, hydraulic and electrical dynamometers.
- Measurement of Vibrations of Machines
- Operation and watch keeping duties of Refrigeration plant
REFERENCES:
1. Lab manuals
LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS
MEASUREMENT LABORATORY
| S.no | NAME OF THE EQUIPMENT | Qty. |
|---|---|---|
| 1 | Slip Gauge and Dial gauge | 6 set |
| 2 | Sine Bar | 2 nos |
| 3 | Four sphere & Two sphere height gauge | 2 nos |
| 4 | Bore Dial gauge | 1 |
| 5 | Sphere | 2 |
| 6 | Vernier caliper | 12 |
| 7 | Profile projector | 1 |
| 8 | Tri-square. | 2 |
| 9 | Bevel protractor | 2 |
| 10 | Floating carriage Micrometer | 1 |
| 11 | Pneumatic comparator. | 1 |
| 12 | Optical flat interferometer. | 1 |
| 13 | Gear tester. | 1 |
| 14 | Auto collimator | 1 |
| 15 | Tool Maker’s Microscope | 1 |
| 16 | Surface test 301 | 1 |
INSTRUMENTATION LABORATORY
| S.no | NAME OF THE EQUIPMENT | Qty. |
|---|---|---|
| 1 | 1. Dead weight type pressure gauge 0-2kgf/cm2 | 01 |
| 2 | 2. Bourdon type Pressure gauge 0-400kgf/cm2 | 01 |
| 3 | Vacuum pressure gauge – McLeod gauge. | 01 |
| 4 | Thermocouple | 01 |
| 5 | Resistance Temperature Detector | 01 |
| 6 | Proving ring mechanical type | 01 |
| 7 | Speed stroboscope | 01 |
| 8 | Strain gauge | 01 |
| 9 | Linear Variable differential transformer 20mm | 01 |
| 10 | Static torque meters | 01 |
| 11 | Piezoelectric sensor analog | 01 |
| 12 | Piezoelectric Crystal Sensor | 01 |
| 13 | Orifice meter, Venturimeter, Rotameter | 01 |
MARINE AC & REFRIGERATION LABORATORY
| S.no | NAME OF THE EQUIPMENT | Qty. |
|---|---|---|
| 1 | Marine Refrigeration Plant (10 ton capacity) | 01 |
| 2 | Marine Air Conditioning Plant (10 ton capacity) | 01 |
| 3 | Vapour compression and Vapour Absorption refrigeration test RIG | 01 each |
For all other B.Tech MA 5th sem syllabus go to Anna University B.Tech MARINE ENGINEERING (MA) 5th Sem Course Structure for (R13) Batch.All details and yearly new syllabus will be updated here time to time. Subscribe, like us on facebook and follow us on google plus for all updates.
Do share with friends and in case of questions please feel free drop a comment.