Process Control for B.Tech 6th sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.
The detailed syllabus for Process Control B.Tech (R13) sixth is as follows
OBJECTIVES:
- To introduce dynamics of various processes
- To educate on the effect of various control actions
- To impart knowledge on the final control elements
- To introduce the evaluation criteria and tuning techniques of controllers
- To introduce the concept of multi loop control techniques
UNIT I : PROCESS DYNAMICS [9 Hours]
Need for process control – Mathematical model of Flow, Level, Pressure and Thermal processes – Interacting and non-interacting systems – Degrees of freedom – Continuous and batch processes – Self regulation – Servo and regulatory operations – Lumped and Distributed parameter models – Heat exchanger – CSTR – Linearization of nonlinear systems.
UNIT II : CONTROL ACTIONS [9 Hours]
Characteristic of on-off, proportional, single speed floating, integral and derivative controllers – P+I, P+D and P+I+D control modes – Electronic PID controller – Auto/manual transfer – Reset windup – Practical forms of PID Controller.
UNIT III : FINAL CONTROL ELEMENTS [9 Hours]
I/P converter – Pneumatic and electric actuators – Valve Positioner – Control Valves – Characteristic of ControlValves:- Inherent and Installed characteristics – Modeling of pneumatic control valve – Valve body:-Commercial valve bodies – Control valve sizing – Cavitation and flashing – Selection criteria.
[TOTAL (L:45+T:15): 60 PERIODS]
OUTCOMES:
- Ability to understand and analyse process control engineering problems.
TEXT BOOKS:
- Bequette, B.W., “Process Control Modeling, Design and Simulation”, Prentice Hall of India, 2004.
- Stephanopoulos, G., “Chemical Process Control – An Introduction to Theory and Practice”, Prentice Hall of India, 2005.
- Seborg, D.E., Edgar, T.F. and Mellichamp, D.A., “Process Dynamics and Control”, Wiley John and Sons, 2nd Edition, 2003.
REFERENCES:
- Coughanowr, D.R., “Process SystemsAnalysis and Control”, McGraw – Hill International Edition, 2004.
- D. P. Eckman, “Automatic Process control”, 7th Edition, John Wiley, New York, 1990.
- Considine, D.M., Process Instruments and Controls Handbook, Second Edition, McGraw, 1999.
- Bela.G.Liptak., “Process Control and Optimization”., Instrument Engineers’ Handbook., volume 2,CRC press and ISA, 2005.
- Curtis D. Johnson Process Control Instrumentation Technology, 8th Edition, Pearson, 2006.
For all other B.Tech IC 6th sem syllabus go to Anna University B.Tech INSTRUMENTATION AND CONTROL ENGINEERING (IC) 6th Sem Course Structure for (R13) Batch. All details and yearly new syllabus will be updated here time to time. Subscribe, like us on facebook and follow us on google plus for all updates.
Do share with friends and in case of questions please feel free drop a comment.