Electrical Measurements Syllabus for B.Tech Third sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.
The detailed syllabus for Electrical Measurements B.Tech 2016-2017 (R13) thirdsem is as follows
OBJECTIVES:
- To introduce the meters used to measure current & voltage.
- To have an adequate knowledge in the measurement techniques for power and energy, power and energy meters are included.
- To provide Elaborate discussion about potentiometer & instrument transformers.
- To provide Detailed study of resistance measuring methods.
- To provide Detailed study of inductance and capacitance measurement.
UNIT I : MEASUREMENT OF VOLTAGE AND CURRENT [9 Hours]
Galvanometers – Ballistic, D’Arsonval galvanometer – Theory, calibration, application – Principle, construction, operation and comparison of moving coil, moving iron meters, dynamometer, induction type & thermal type meter, rectifier type – Extension of range and calibration of voltmeter and ammeter – Errors and compensation.
UNIT II : MEASUREMENT OF POWER AND ENERGY [9 Hours]
Electrodynamometer type wattmeter – Theory & its errors – Methods of correction – LPF wattmeter– Phantom loading – Induction type kWh meter – Induction type energy meter – Calibration of wattmeter and Energy meter
UNIT III : POTENTIOMETERS & INSTRUMENT TRANSFORMERS [9 Hours]
DC potentiometer – Basic circuit, standardization – Laboratory type (Crompton’s) – AC potentiometer Drysdale (polar type) type – Gall-Tinsley (coordinate) type – Limitations & applications – Instrument Transformer:-C.T and P.T construction, theory, operation and characteristics.
[TOTAL (L:45+T:15): 60 PERIODS]
OUTCOMES:
- Ability to understand and apply basic science, circuit theory, control theory and signal processing concepts to engineering problems.
TEXT BOOKS:
- E.W. Golding & F.C.Widdis, ‘Electrical Measurements & Measuring Instruments’, A.H.Wheeler & Co, 2001.
- A.K. Sawhney, A Course in Electrical & Electronic Measurements & Instrumentation, Dhanpat Rai and Co, New Delhi, 2010.
- H.S. Kalsi, Electronic Instrumentation, Tata McGraw-Hill, New Delhi, 2010.
REFERENCES:
- J.B.Gupta, ‘A Course in Electronic and Electrical Measurements and Instrumentation’, S.K.Kataria & Sons, Delhi, 2003.
- S.K.Singh, ‘Industrial Instrumentation and control’, Tata McGraw Hill, 2nd edn., 2002.
- Martin U. Reissland, ‘Electrical Measurement – Fundamental Concepts and Applications’, New Age International (P) Ltd., 2001.
- R.B. Northrop, Introduction to Instrumentation and Measurements, Taylor & Francis, New Delhi, 2008.
- M.M.S. Anand, Electronics Instruments and Instrumentation Technology, Prentice Hall India, New Delhi, 2009.
- J.J. Carr, Elements of Electronic Instrumentation and Measurement, Pearson Education India, New Delhi, 2011.
For all other B.Tech IC 3rd sem syllabus go to Anna University B.Tech INSTRUMENTATION AND CONTROL ENGINEERING (IC) 3rd Sem Course Structure for (R13) Batch. All details and yearly new syllabus will be updated here time to time. Subscribe, like us on facebook and follow us on google plus for all updates.
Do share with friends and in case of questions please feel free drop a comment.