Anna University B.Tech ECE (R13) 7th Sem Optical and Microwave Laboratory Syllabus

Optical and Microwave Laboratory for B.Tech 7th sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.

The detailed syllabus for Optical and Microwave Laboratory B.Tech (R13) seventhsem is as follows

OBJECTIVES: The student should be made to:

• Understand the working principle of optical sources, detector, fibers and microwave components
• Develop understanding of simple optical communication link.
• Learn about the characteristics and measurements in optical fiber
• Know about the behavior of microwave components.
• Practice microwave measurement procedures

LIST OF EXPERIMENTS OPTICAL EXPERIMENTS

• DC Characteristics of LED and PIN Photo diode
• Mode Characteristics of Fibers
• Measurement of connector and bending losses
• Fiber optic Analog and Digital Link- frequency response(analog) and eye diagram (digital)
• Numerical Aperture determination for Fibers
• Attenuation Measurement in Fibers

MICROWAVE EXPERIMENTS

1. Reflex klystron or Gunn diode characteristics and basic microwave parameter measurement such as VSWR, frequency, wavelength.
2. Directional Coupler Characteristics.
3. Radiation Pattern of Horn Antenna.
4. S-parameter Measurement of the following microwave components (Isolator, Circulator, E plane Tee, H Plane Tee, Magic Tee)
5. Attenuation and Power Measurement

[TOTAL: 45 PERIODS]

LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS 3 STUDENTS PER EXPERIMENT:

1. Trainer kit for carrying out LED and PIN diode characteristics, Digital multi meter, optical power meter. – 2 Nos
2. Trainer kit for determining the mode characteristics, losses in optical fiber.- 2 Nos
3. Trainer kit for analyzing Analog and Digital link performance, 2 Mbps PRBS Data source, 10 MHz signal generator, 20 MHz Digital storage Oscilloscope. – 2 Nos
4. Kit for measuring Numerical aperture and Attenuation of fiber – 2 Nos
5. MM/SM Glass and plastic fiber patch chords with ST/SC/E2000 connectors – 2 set
6. LEDs with ST / SC / E2000 receptacles – 650 / 850 nm – 2 set
7. PiN PDs with ST / SC / E2000 receptacles – 650 / 850 nm – 2 set
8. Microwave test Bench at X band to determine Directional coupler characteristics. – 2 Nos
9. Microwave test Bench at X band and Antenna turn table to measure Radiation pattern of Horn antenna, 2 Horn antennas. – 2 Nos
10. Microwave test Bench at X band to determine VSWR for Isolator and Circulator, VSWR meter, Isolator, Circulator, E Plane Tee, H plane Tee. – 2 Nos
11. Microwave test Bench at X band, Variable attenuator, Detector and 20 MHz Digital / Analog Oscilloscope. – 2 Nos

Note: Microwave test bench comprises of Reflex klystron or Gunn diode with power supply, Gunn oscillator, PIN modulator, Isolator, Fixed and Variable Attenuator, frequency meter, Slotted section, Wave guides, detector with mount, Termination, Movable short, Slide screw tuner, Horn antenna, Directional coupler and 20 MHz Digital / Analog Oscilloscope.

Download iStudy Android App for complete Anna University syllabus, results, timetables and all other updates. There are no ads and no pdfs and will make your life way easier.

OUTCOMES: At the end of the course, the student should be able to:

1.  Analyze the performance of simple optical link.
2. Test microwave and optical components.
3. Analyse the mode characteristics of fiber
4. Analyse the radiation of pattern of antenna.

For all other B.Tech ECE 7th sem syllabus go to Anna University B.Tech ELECTRONICS AND COMMUNICATION ENGINEERING (ECE) 7th Sem Course Structure for (R13) Batch.All details and yearly new syllabus will be updated here time to time. Subscribe, like us on facebook and follow us on google plus for all updates.

Do share with friends and in case of questions please feel free drop a comment.