Electrical Engineering and Control System Laboratory Syllabus for B.Tech 4th sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.
The detailed syllabus for Electrical Engineering and Control System Laboratory B.Tech (R13) fourthsem is as follows
OBJECTIVES:
- To provide hands on experience with generators and motors.
- To Understand the working of DC/AC motors and generators
- To study the characteristics of transducers
- To learn the use of transformer
- To understand the behavior of linear system through simulation
- To gain knowledge of controllers
LIST OF EXPERIMENTS:
- Study of DC & AC motor starters
- Study of three phase circuits
- Speed Control of DC shunt motor
- Load Test on DC shunt motor
- OCC & Load Characteristics of DC shunt generator
- Transfer Function of separately excited D.C.Generator.
- Regulation of three phase alternator
- Open Circuit and Short Circuit test on single phase transformer to draw its equivalent circuit
- Load test on single-phase transformer
- Load test on single phase and three-phase Induction motor
- Measurement of passive elements using Bridge Networks.
- Study of transducers and characterization.
- Digital simulation of linear systems.
- Stability Analysis of Linear system using MATLAB or equivalent Software.
- Study the effect of P, PI, PID controllers using MATLAB or equivalent Software.
- Design of Lead and Lag compensator.
TOTAL: 45 PERIODS
OUTCOMES: At the end of the course, the student should be able to:
- Perform experiments to study the load characteristics of DC motors / generators.
- Design bridge network circuit to measure the values of passive component.
- Analyse the stability of linear system through simulation software.
- Obtain transfer function of DC generators.
LAB EQUIPMENT FOR A BATCH OF 30 STUDENTS:
- DC Shunt Motor with Loading Arrangement 2
- 3HP,220V,14A,750RPM,0.6A(Shunt field)
- DC Shunt Motor Coupled With Three phase Alternator 1
- DC Shunt Motor – kW: 5.2 / volts: 220 / Amps: 27.5/
- Speed: 1500 RPM/ Field current: 0.9A
- Three phase Alternator – kVA: 7.5/ volts: 415/ Amps: 10.4 Speed: 1500 RPM/ Field current: 2A.
- Single Phase Transformer; 2 KVA,230/110-166 V 1
- Three Phase Induction Motor with Loading Arrangement 1
- (3.7KW,415v,7.5A,1430 RPM)
- Single Phase Induction Motor with Loading Arrangement 1
- (230V,5HP,17A)
- DC Shunt Motor Coupled With DC Compound Generator 1
- (DC Shunt Motor: kW: 7.4/ volts: 220/ Amps: 38.5/ Speed: 960 RPM Field current1.2A)
- (DC Compound Generator: kW: 7.5/ volts: 220/ Amps: 38.5/ Speed: 960 RPM / Field current1.2A)
- Tachometer –Digital/Analog 8
- Single Phase Auto Transformer;(0-270)V 2
- Three Phase Auto Transformer;(0-270)V 1
- MC Voltmeter-(0-300/600)V 5
- MC Ammeter (0-10/20)A 5
- MC Ammeter (0-2/1)A 4
- MI Voltmeter (0-300/600)V 5
- MI Ammeter (0-10/20)A 6
- MI Ammeter (0-1/2)A 4
- UPF Wattmeter (300/600V,10/20A) 4
- LPF Wattmeter (300/600V,10/20A) 4
- Single Phase Resistive Loading Bank(10KW) 2
- Three Phase Resistive Loading Bank(10KW) 2
- SPST switch 2
- Fuse various ranges As per the requirement
- Wires As per the requirement
- Rheostats(100Ω,1A;250Ω,1.5A;75Ω,16A,1000Ω,1A) Each 2
- Computers with MATLAB or equivalent Software.
For all other B.Tech ECE 4th sem syllabus go to Anna University B.Tech Electronics and Communication Engineering (ECE) 4th Sem Course Structure for (R13) Batch.All details and yearly new syllabus will be updated here time to time.Subscribe, like us on facebook and follow us on google plus for all updates.
Do share with friends and in case of questions please feel free drop a comment.