34066: Embedded Systems Practical Electronics 6th Sem Syllabus for Diploma TNDTE M Scheme

Embedded Systems Practical detail TNDTE Diploma syllabus for Electronics And Communication Engineering (EC), M scheme is extracted from TNDTE official website and presented for diploma students. The course code (34066), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other electronics 6th sem syllabus for diploma m scheme tndte you can visit Electronics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for embedded systems practical is as follows.

Rationale:

List of Experiments:

1. Study Of Arm Processor Kit

(whatever the ARM processor kit the institution is having) Example: LPC2148 The student should able to Understand the memory mapping of the IO and peripherals List the peripherals present in the processor Explain that how to use an IO pin, related SFRs and instructions Explain that how to use timer, UART, its related SFR and instructions sets

2. Simulation Of Arithmetic Operation On Arm In Assembly

Develop an assembly level code for the single precision (32 bit) arithmetic function.

1. Addition,
2. Subtraction and
3. Multiplication (Note: simulate the program in the software)

3. Simulation Of Assembly Level Program For Soft Delay

Develop an assembly level code for the 32 bit or 64 bit delay routine. Calculate the no of clock taken for the routine and adjust the delay value for the desired. (Note: simulate the program in the software)

4. Simple Led Blinking With Variable Speed In Asm

Develop an assembly level program of ARM processor to blink a LED (including delay routine) in variable speed in the trainer kit. Upon change in the delay program the speed should vary. No need to change the speed dynamically. (Note: Student should study the list of special function registers associated for accessing the IO pin. Manual containing List of IO registers (SFR for IO) can be given to the students for the final exam)

5. Realization Of Input And Output Port In Asm

Develop an assembly level program of ARM processor to read a port in which switches are connected in the trainer kit. Send back the receive input to output in which LEDs are connected in the trainer kit Note: Student should study the list of special function registers associated for accessing Port the read and write. Manual containing List of IO registers (SFR for IO) can be given to the students for the board exam)

6. Simple Led Blinking With Variable Speed In C

Develop a C program for ARM processor to blink a LED (including delay routine) in variable speed. Upon change in the input switch the speed should vary. (Note: The C code should be in while loop)

7. Seven Segment Led Display Interface In C

Develop a C program for ARM processor to interface a seven segment LED display. The display should count up for every one second.

8. Seven Segment Led Display Interface In C

Develop a C program for ARM processor to interface a seven segment LED display. The display should count up for every one second. The delay can be used from experiment

9. Realizing Timer Peripheral In Arm By Polling Method

Develop a C program for ARM processor to run a timer peripheral in ARM. The timer flag can be pooled for timer end. As timer ends reset the timer and update new value to the LED display.

10. Realizing Timer Peripheral In Arm By Interrupt Driven Method

Develop a C program for ARM processor to run a timer peripheral in ARM. The timer flag can be pooled for timer end. As timer ends reset the timer and update new value to the LED display.

11. Serial Transmission And Reception Of A Character In C By Polling Method

Write a C Programs for receiving a character from other device (Computer) and send the next character of the received one to the device back. Note: Student should understand the SFRs used for serial communication. Manual containing list of SFRs for the UART can be given to the students for their final examination

12. Serial Transmission And Reception Of A Character In C By Interrupt Method

Write a C Programs for receiving a character from other device (Computer) and send the next character of the received one to the device back.

13. Displaying Alphanumeric Characters In 2X16 Line Lcd Module

Write a C Programs for displaying a number and an alphabet in the LCD module by just calling the built in LCD function. The display should come in the desired line and column. (Built in function for the LCD can be given in the manual)

14. Converting Hexadecimal To Decimal And To Display In Lcd

Write a C Programs for converting the given 8 bit hexadecimal into decimal and there by converting into ASCII which is to be displayed in the LCD module. (Built in function for the LCD can be given in the manual)

15. Accessing Internal Adc Of The Arm Processor And To Display In Lcd

Write a C Program for reading an ADC, convert into decimal and to display it The ADC input is connected to any analog sensor. (Note: Student should study the SFR associated with ADC, Manual containing List of SFR for accessing ADC can be given for the examination.)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

List of Equipments

1. ARM7 TDMI Kit – 10 nos with interface boards for the above experiments The Chip set may be TMS470, LPC2138, LPC2148, or STR7 etc
2. Interfaces:RTC, ADC, LCD, Seven segment display, LEDS and Switches.
3. Manual for the kit and for interfacing board with stepper motor
4. Manual for the built in function for the Board.

Note:

1. Manual for the ARM instructions sets and manual for the trainer kit (Excluding sample program) can be allowed for their board exam.
2. Definition for built in function for the board can be given to students for their board exam.
3. Manual containing procedure for program down loading through boot loader or JTAG can be given to students for their board exam

For detail syllabus of all other subjects of BE Electronics, M scheme do visit Electronics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.