Workshop Practice detail TNDTE Diploma syllabus for 1st Sem M scheme is extracted from TNDTE official website and presented for diploma students. The course code (30018), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.
For all other 1st sem syllabus for diploma m scheme tndte you can visit 1st Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for workshop practice is as follows.
Rationale:
Workshop practice is a basic subject for all branches of Diploma Engineering and Technology. This subject is aimed at providing basic understanding of the fundamentals of practical sections; mainly planning, marking, cutting, filing, wiring connections, standards & conventions of wiring, the tools, the use of measuring instruments in engineering applications and plumbing tools and practices.
The topics covered are based on the syllabus for Diploma studies in engineering. The subject is planned to include sufficient practices which would help the student to understand the principles of manufacturing.
Objectives:
At the end of the practice, the students will be able to,
- Acquire skills in basic engineering practice.
- Identify the hand tools and instruments.
- Study and use measuring instruments.
- Practical skills in the fitting, plumbing and wiring trades.
1. Fitting Section
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
2. Wiring
- Study about the safety measures in wiring.
- Study of tools.
- Study about the earthing.
- Identify different electrical fitting and accessories.
- Identify the types of wires with colour code.
- Identify the symbols in circuit diagram.
- Practice simple wiring.
- Uses of multimeter.
Exercises
- One lamp controlled by one-way switch – measure and check the voltage and current using multimeter.
- Two lamps connected in series – measure and check the voltage and current using multimeter.
- Two lamps connected in parallel – measure and check the voltage and current using multimeter.
- Staircase wiring.
Note: Students should draw the circuit diagram and collect the components according to their requirement. Only components should be given to the students. The connection should be given from the main switch. Suitable safety precautions should be made before connections.
3. Plumbing
- Plumbing is the skilled trade of working with pipes, tubing and plumbing fixtures for drinking water systems and the drainage of waste.
- The plumbing industry is a basic and substantial part of every developed economy due to the need for clean water, and proper collection and transport of wastes.
- Plumbing also refers to a system of pipes and fixtures installed in a building for the distribution ofpotable water and the removal ofwaterborne wastes.
- Plumbing is usually distinguished from water and sewage systems, in that a plumbing system serves one building, while water and sewage systems serve a group of buildings or a city.
- To install pipes and fixtures.
- To repair or replace all kinds of leaks.
- Use personal protective equipments.
Exercises
- Install a sink / washbasin with tap using different PVC/GI pipe accessories such as bend, tee and gate valve.
- Cutting, bending and external threading of GI pipes using Die.
- Repair a leakage in the water tap and fix water meter.
- Lay pipes to install rain water harvesting.
The students should be given training in all the sections. All the exercises should be completed. The students should maintain record notebook for the concerned trades and submit during the Board Practical Examinations.
Fitting Exercise
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
Board Examination
Note: Any two exercises should be carried out for examination. Fitting is compulsory any one exercise form wiring or plumbing. All the exercises should be given in the question paper and students are allowed to select by a lot. Students should have liberty to do the examination for three hours. No fixed time for each trade. The number of instrument / equipment facility should be available for each batch strength during examination.
Fitting (Compulsory) – 35
- Marking & Cutting – 10
- Filing / Dimensions – 20
- Joint / Finish – 5
Wiring 35
- Circuit diagram – 15
- Connection / Checking – 15
- Result – 5
Plumbing 35
- Preparation ofmaterial – 15
- Connection / Testing – 15
- Result -5
- Viva-voce 5
Total 75
Internal Marks 25
- Observation – 10
- Record – 10
- Attendance – 5
Total – 25
Fitting Section
List Of The Equipments
- Power Hacksaw / bar cut machine
- Hand shearing machine
- Surface plate
- Anvil
- Drilling machine
- Calipers – Inside / odd leg / outside
- Vernier caliper
- Vernier Height Gauge
- Bench vice fitted on the table
- H and hacksaw Frame
- Flat rough / smooth file
- Try angular file
- H alf round file
- Try square
- Steel rule
- Scriber
- Square file
- Round file
- Dot punch / Center punch / Prick punch
- Hammer
- Drill Bit – Required size
- Tap set – Required size
- Tap wrench
Wiring Section
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.
Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.
Wish you a great luck ahead.