3rd Sem, B.E/B.Tech, EEE, Syllabus

Analog Electronic Circuits (Core Subject) Syllabus for VTU BE/B.Tech CBCS 2015-16

Analog Electronic Circuits (Core Subject) Syllabus for VTU BE/B.Tech Electrical and Electronics Engineering third sem complete syllabus covered here. This will help you understand complete curriculum along with details such as exam marks and duration. The details are as follows.

Subject Code 15EE34 IA Marks 20
Number of Lecture Hours/Week 4 Exam Marks 80
Total Number of Lecture Hours 50 Exam Hours 3

CREDITS – 04

Course Objectives:
This course will enable students to:

  • Provide the knowledge for the analysis of transistor circuits.
  • Develop skills to design the basic electronic circuits like amplifiers and oscillators.
  • Highlight the importance of FET and MOSFET.
Modules Teaching Hour Revised Bloom’s Taxonomy (RBT) Level
Module -1                                                                                                                                                      _
Diode Circuits: Review of diodes as rectifiers (No question shall be set from review portion). Diode clipping and clamping circuits.

Transistor biasing and stabilization: Operating point, Analysis and design of fixed bias circuit, Self-bias circuit, Emitter stabilized bias circuit, Voltage divider bias circuit, Stability factor of different biasing circuits. Problems.

Transistor switching circuits: Transistor switching circuits, PNP transistors, Thermal compensation techniques

10 Hours L1 – Remembering, L2 – Understanding, L3 – Applying.
Module -2 _
Transistor at low frequencies: BJT transistor modelling, CE fixed bias configuration, voltage divider bias, Emitter follower, CB configuration, Collector feedback configuration

Download iStudy App (No Ads, No PDFs) for complete VTU syllabus, results, timetables and all other updates.

10 Hours L2 – Understanding, L3 – Applying, L4 – Analysing, L5 – Evaluating.
Module -3 _
Multistage amplifiers: Cascade and cascode connections, Darlington circuits, Analysis and design.

Feedback amplifiers: Feedback concept, Different types, Practical feedback circuits, Analysis and design of feedback circuits.

10 Hours L1 – Remembering, L2 – Understanding, L3 – Applying, L4 – Analysing
Module -4 _
Power amplifiers: Amplifier types, Analysis and design of different power amplifiers, Distortion in power amplifiers.

Oscillators: Principle of operation, Analysis and derivation of frequency of oscillation of phase shift oscillator, Wien bridge oscillator, RF and crystal oscillator and frequency stability

10 Hours L1 – Remembering, L2 – Understanding, L3 – Applying, L4 – Analysing.
Module -5 _
FETs: Construction, Working and characteristics of JFET and MOSFET. Biasing of JFET and MOSFET, Analysis and design JFET (Only common source configuration with fixed bias) and MOSFET amplifiers. 10 Hours L1 – Remembering, L2 – Understanding, L3 – Applying, L4 – Analysing.

Course outcomes: After studying this course, students will be able to:

  • Utilize the characteristics of transistor for different applications.
  • Design and analyze biasing circuits for transistor.
  • Design, analyze and test transistor circuitry as amplifiers and oscillators.

Graduate Attributes (As per NBA)

  • Engineering Knowledge
  • Problem Analysis
  • Ethics

Question paper pattern:

  • The question paper will have ten questions.
  • Each full question is for 16 marks.
  • There will be 2 full questions (with a maximum of four sub questions in one full question) from each module.
  • Each full question with sub questions will cover the contents under a module.
  • Students will have to answer 5 full questions, selecting one full question from each module.

Text/Reference Books

  • Electronic Devices and Circuit Theory Robert L Boylestad Louis Nashelsky Pearson 11th Edition, 2015
  • Integrated Electronics, Analysis and Digital Circuits and Systems Jacob Millman et al Mc Graw Hill 2nd Edition, 2009
  • Electronic Devices and Circuits David A Bell Oxford University Press 5th Edition, 2008
  • Microelectronics Circuits Analysis and Design Muhammad Rashid Cengage Learning 2 nd Edition, 2014
  • A Text Book of Electrical Technology, Electronic Devices and Circuits B.L. Theraja, A.K. Theraja, S. Chand Reprint, 2013
  • Electronic Devices and Circuits Anil K. Maini Vasha Agarval Wiley 1st Edition, 2009
  • Electronic Devices and Circuits S.Salivahanan N.Suresh Mc Graw Hill 3rd Edition, 2013
  • Fundamentals of Analog Circuits Thomas L Floyd Pearson 2nd Edition, 2012

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Electrical and Electronics Engineering Group.

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Biomedical Engineering Group.

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Electronics and Instrumentation Engineering Group.

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Medical Electronics Group.

For more information about all VTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.

Leave a Reply

Your email address will not be published. Required fields are marked *

*