Wood Products II detailed syllabus for Wood & Paper Technology (WP) for 2021 revision curriculum has been taken from the SITTTRs official website and presented for the Wood & Paper Technology students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.
For Wood & Paper Technology 5th Sem scheme and its subjects, do visit Wood & Paper Technology (WP) 5th Sem 2021 revision scheme. The detailed syllabus of wood products ii is as follows.
Course Objectives:
For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
On completion of the course, the student will be able to:
- Outline the Manufacture of block boards, flush door, testing and properties.
- Disseminate pressing, finishing, testing and properties of particle board
- Explain the Chipping of wood, pulping methods, Mat formation manufacture of Insulation board and Hardboard
- Explain sandwich composition, bulking treatments and testing and properties of wood laminates
Module 1:
Block board Types – block method, strip method. Assembling of block board core. Continuous gluing, spot gluing. Decorative and non-decorative block board Flush door Types – solid core flush door, cellular core (cellulose) flush door. Adhesive used. chipping and rebate cutting, facing Testing and properties of block board & flush door Properties of block board &flush door. Alternative wetting and drying test, knife test, boiling test of Blackboard-Particle board – introduction – history – particles, flakes, shavings, splinter and sliver, and granules. Classification of P.B – exterior grade, interior grade, single layer, three layer , multi-layer, graded, flat pressed and extension pressed P.B uses of P.B, Raw materials , adhesive – UF and PF resin, additives – water repellents, extenders, fungicides and insecticides and fire retardants, Schematic out line P.B name factors. Particle preparation, debarking cross cutting, splitting Classification of dryers, rotary drum dryers and tube bund le dryers, burned waste gas stream dryer, suspension type dryer.
Module 2:
For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Module 3:
Fiber board insulation board MDF and hard board – history and development of fiber board – classifications of fiber board – modified wood raw materials – non wood fibrous raw materials – properties and uses of different types of fiber board – properties of semi rigid insulation board, rigid insulation board, hard boards – schematic outline of fiber board manufacturer using wet, semi dry and dry process – chipping – magnetic separation and
screening of fibers – storage of chips and the importance of the M.C of chips during storage – wetting of chips – moisture content of chip before pulping – pulping processes – ground wood pulping by pocket grinders – thermo mechanical process- mat formation – importance of mat formation – methods of mat formation – mat formation by deckle box – Fourdrinier method insulation board – sizing of insulation stock – mat formation – drying – trimming and finishing – Fibreboard – block diagram of hardboard manufactures – sizing – mat formation and Pressing – oil tempering, heat treatment, Humidification – testing methods of fiber board.
Module 4:
Oriented Strand board – Manufacturing Methods – wood wool board – Method of manufacture of wood wool board – Properties and uses – Cement Bonded Particleboard -Method of Manufacture – Moulded particle Board – Werzalit Process – Densified Wood -method of Preparation of raw materials – densification of Wood by Impregnation and Compression – Metalized Wood – Compreg – Dimensional stabilisation of wood – the dimensional stabilization such as cross lamination, external and Internal coating, reduction in hygroscopicity, heat stabilisation &cross linking-Define sand witch Composition -Explain the raw materials – Edge banding of Particle Board – Laminated PB – Bulking treatment – bulking treatments – Bulking treatments such as salt treatment, Sugar treatment, poly ethylene glycol treatment, wax treatment, Phenolic resin treatment -Properties and uses of impreg – acetylated wood – Testing and Properties.
Text Books:
For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Online Resources
- https://www.researchgate.net/publication/265168265_Timber_and_wood_produ cts
- http://www.kstr.lth.se/fileadmin/kstr/pdf_files/Timber_Engineering_2017/Timbe r_and_engineered_wood_products.pdf
- http://www.dec.ny.gov/docs/lands_forests_pdf/woodproducts.pdf
- https://www.fpl.fs.fed.us/documnts/fplgtr/fpl_gtr190.pdf
- http://www.fao.org/3/an647e/an647e00.pdf
For detailed syllabus of all other subjects of Wood & Paper Technology (WP), 2021 revision curriculum do visit Wood & Paper Technology 5th Sem subject syllabuses for 2021 revision.
To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..
To see the results of Wood & Paper Technology (WP) of diploma 2021 revision curriculum do visit SITTTR diploma Wood & Paper Technology (WP) results..
For all Wood & Paper Technology academic calendars, visit Wood & Paper Technology all semesters academic calendar direct link.