Spinning Technology Lab-I Syllabus for VTU BE/B.Tech Textile Engineering & Silk Technology third sem complete syllabus covered here. This will help you understand complete curriculum along with details such as exam marks and duration. The details are as follows.
| Laboratory Code | 15TXL36 | IA Marks | 20 |
|---|---|---|---|
| Number of Practical Hours/Week | 01Hr Tutorial (Instructions) + 02 Hours Laboratory | Exam Marks | 80 |
| Exam Hours | 3 |
CREDITS – 02
Course Objectives
The objective of this Course is to describe the basic Practical spinning process of Textile Machineries such as Blow Room, Carding. Students acquire the practical knowledge about the machineries used
| Laboratory Experiments: NOTE: The experiments are to be carried using discrete components only. | Revised Bloom’s Taxonomy (RBT) Level |
|---|---|
| Blow Room: 1. Passage of material through the blow room and different openers and beaters of blow room. Selection of beater points and study of their design features and to evaluate their efficiencies. | L2, L3, L4 |
| L2, L3, L4 | |
| 3. Calculation of cleaning efficiency at all beaters and openers. | L2, L3, L4 |
| 4. Study of piano feed regulating motion and calculation of cone drum speed, feed roller speed and beats/inch. | L4 |
| 5. Production and CV% calculation in Blow Room laps (within and between). | L4 |
| 6. Identification of Blow Room process for different mixings, impurities and counts. | L2 |
| Carding: 7. Explanation of Passage of material through revolving flat card. | L2 |
| 8. Speed and draft calculation of different parts of carding with the help of gearing and driving arrangement. | L4 |
| 9. Draft constant and its calculation. | L4 |
| 10. Draft change pinion calculation and machine operation to get different hank of slivers | L3 |
| 11. Calculation on snap study to analyze neps, sliver variations and efficiency. | L4, L5 |
| 12. Settings of different parts and gauges used setup the machines. | L3, L4 |
| 13. Comparison between conventional and modern high speed card with respect to production, efficiency and quality of sliver. | L4 ,L5 |
| 14. Hank and CV calculation of sliver | L4 |
Course Outcome
On completion of this course, Students will be able to
- Learn the practical aspects of the machineries used
- Gain knowledge about the process parameters such as Settings, Speeds of Blow room and Carding
- Will be able to define the actual running of the machineries
Graduate Attributes (as per NBA)
- Engineering Knowledge.
- Problem Analysis.
- Design/Development of solutions.
Conduct of Practical Examination:
- All laboratory experiments are to be included for practical examination.
- Students are allowed to pick one/two experiment from the lot.
- Strictly follow the instructions as printed on the cover page of answer script for breakup of marks.
- Change of experiment is allowed only once and 15% Marks allotted to the procedure part to be made zero.
For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Textile Technology & Silk Technology Group.
For more information about all VTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.