VTU Syllabus ME 2018 Scheme (CBCS)

VTU 1st and 2nd Sem ME Syllabus 2018

VTU 3rd Sem ME Syllabus 2018

VTU 4th Sem ME Syllabus 2018

VTU 5th Sem ME Syllabus 2018

VTU 6th Sem ME Syllabus 2018

VTU 7th Sem ME Syllabus 2018

VTU 8th Sem ME Syllabus 2018

VTU Syllabus ME 2017 Scheme (CBCS)

VTU Syllabus ME 1st and 2nd Sem 2017

VTU Syllabus ME 3rd Sem 2017

VTU Syllabus ME 4th Sem 2017

VTU Syllabus ME 5th Sem 2017

VTU Syllabus ME 6th Sem 2017

VTU Syllabus ME 7th Sem 2017

VTU Syllabus ME 8th Sem 2017

For all other details about VTU related academic calendar, notices, new syllabus, results, cutoffs, time table will be updated here time to time.

Don’t forget to download iStudy App and share with your friends for latest updates regarding syllabus and results, class timetable and much more. Incase of questions don’t hesitate to leave a comment or leave a feedback in iStudy App for faster response.

Wish you good luck!!!

For all the other VTU 4th Sem ME Syllabus for BE 2018 Scheme, do visit Mechanical Engineering 4th Sem 2018 Scheme. For all the Select Subject 8 subjects refer to Select Subject 8 Scheme. The detail syllabus for foundry,forging and welding lab is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Experiments

PART A Testing of Molding sand and Core sand. Preparation of sand specimens and conduction of the following tests:

1. Compression, Shear and Tensile tests on Universal Sand Testing Machine.
2. Permeability test
3. Sieve Analysis to find Grain Fineness Number (GFN) of Base Sand
4. Clay content determination on Base Sand.

Welding Practice:

1. Use of Arc welding tools and welding equipment
2. Preparation of welded joints using Arc Welding equipment
3. L-Joint, T-Joint, Butt joint, V-Joint, Lap joints on M.S. flats

PART B Foundry Practice: Use of foundry tools and other equipment for Preparation of molding sand mixture. Preparation of green sand molds kept ready for pouring in the following cases:

1. Using two molding boxes (hand cut molds).
2. Using patterns (Single piece pattern and Split pattern).
3. Incorporating core in the mold.(Core boxes).
4. Preparation of one casting (Aluminium or cast iron-Demonstration only)

PART C

1. Forging Operations: Use of forging tools and other forging equipment.
   • Calculation of length of the raw material required to prepare the model considering scale loss.
   • Preparing minimum three forged models involving upsetting, drawing and bending operations.

Course Outcomes:

At the end of the course, the student will be able to:

• Demonstrate various skills in preparation of molding sand for conducting tensile, shear and compression tests using Universal sand testing machine.
• Demonstrate skills in determining permeability, clay content and Grain Fineness Number of base sands.
• Demonstrate skills in preparation of forging models involving upsetting, drawing and bending operations.

Conduct of Practical Examination:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Scheme of Examination:

1. One question is to be set from Part-A : 30 marks (20 marks for sand testing+ 10 Marks for welding)
2. One question is to be set from either Part-B or Part-C: 50 Marks
3. Viva – Voce: 20 marks

For detail Syllabus of all other subjects of BE Mechanical Engineering, 2018 scheme, visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results.

For detailed Syllabus of all other subjects of BE 4th Sem, 2018 scheme do visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.For all the other Mechanical Engineering 4th Sem 2018 Scheme VTU subjects do refer to Mechanical Engineering 4th Sem 2018. The detail syllabus for vtu 4th sem me select subject 8 syllabus for be 2018 scheme is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of BE 4th Sem, kindly visit VTU BE 4th Sem direct result link.

Wishing you great luck ahead.

For detailed Syllabus of all other subjects of BE 4th Sem, 2018 scheme do visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.For all the other Mechanical Engineering 4th Sem 2018 Scheme VTU subjects do refer to Mechanical Engineering 4th Sem 2018. The detail syllabus for vtu 4th sem me select subject 7 syllabus for be 2018 scheme is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of BE 4th Sem, kindly visit VTU BE 4th Sem direct result link.

Wishing you great luck ahead.

For all the other VTU 4th Sem ME Syllabus for BE 2018 Scheme, do visit Mechanical Engineering 4th Sem 2018 Scheme. For all the Select Subject 8 subjects refer to Select Subject 8 Scheme. The detail syllabus for workshop and machine shop practice (consists of fitting, and machining) is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Experiments

PART A

1. Preparation of at least two fitting joint models by proficient handling and application of hand tools- V-block, marking gauge, files, hack saw drills etc.

PART B

1. Preparation of three models on lathe involving – Plain turning, Taper turning, Step turning, Thread cutting, Facing, Knurling, Drilling, Boring, Internal Thread cutting and Eccentric turning. Exercises should include selection of cutting parameters and cutting time estimation.

PART C

1. Cutting of V Groove/ dovetail / Rectangular groove using a shaper. Cutting of Gear Teeth using Milling Machine. Exercises should include selection of cutting parameters and cutting time estimation.

PART D (DEMONSTRATION ONLY) Study & Demonstration of power tools like power drill, power hacksaw, portable hand grinding, cordless screw drivers, production air tools, wood cutter, etc., used in Mechanical Engineering.

Course Outcomes:

At the end of the course, the student will be able to:

1. CO1: To read working drawings, understand operational symbols and execute machining operations.
2. CO2: Prepare fitting models according to drawings using hand tools- V-block, marking gauge, files, hack saw, drills etc.
3. CO3: Understand integral parts of lathe, shaping and milling machines and various accessories and attachments used.
4. CO4: Select cutting parameters like cutting speed, feed, depth of cut, and tooling for various machining operations.
5. CO5: Perform cylindrical turning operations such as plain turning, taper turning, step turning, thread Cutting, facing, knurling, internal thread cutting, eccentric turning and estimate cutting time.
6. CO6: Perform machining operations such as plain shaping, inclined shaping, keyway cutting, Indexing and Gear cutting and estimate cutting time.

Conduct of Practical Examination:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Scheme of Examination:

1. One Model from Part-A or Part-C: 30 Marks
2. One Model from Part-B: 50 Marks
3. Viva – Voce: 20 Marks
4. TOTAL: 100 Marks

For detail Syllabus of all other subjects of BE Mechanical Engineering, 2018 scheme, visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results.

For all the other VTU 4th Sem ME Syllabus for BE 2018 Scheme, do visit Mechanical Engineering 4th Sem 2018 Scheme. For all the Select Subject 7 subjects refer to Select Subject 7 Scheme. The detail syllabus for material testing lab is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Experiments

PART A

1. Preparation of specimen for Metallographic examination of different engineering materials. To report microstructures of plain carbon steel, tool steel, gray C.I, SG iron, Brass, Bronze & composites.
2. Heat treatment: Annealing, normalizing, hardening and tempering of steel. Metallographic specimens of heat treated components to be supplied and students should report microstructures of furnace cooled, water cooled, air cooled, tempered steel. Students should be able to distinguish the phase changes in a heat treated specimen compared to untreated specimen.
3. Brinell, Rockwell and Vickers’s Hardness tests on untreated and heat treated specimens.
4. To study the defects of Cast and Welded components using Non-destructive tests like:
   1. Ultrasonic flaw detection
   2. Magnetic crack detection
   3. Dye penetration testing.

PART B

1. Tensile, shear and compression tests of steel, aluminum and cast iron specimens using Universal Testing Machine
2. Torsion Test on steel bar.
3. Bending Test on steel and wood specimens.
4. Izod and Charpy Tests on Mild steel and C.I Specimen.
5. To study the wear characteristics of ferrous and non-ferrous materials under different parameters.
6. Tensile, shear and compression tests of steel, aluminum and cast iron specimens using Universal Testing Machine
7. Fatigue Test (demonstration only).

Course Outcomes:

At the end of the course, the student will be able to:

1. CO1: Acquire experimentation skills in the field of material testing.
2. CO2: Develop theoretical understanding of the mechanical properties of materials by performing experiments.
3. CO3: Apply the knowledge to analyse a material failure and determine the failure inducing agent/s.
4. CO4: Apply the knowledge of testing methods in related areas.
5. CO5: Understand how to improve structure/behaviour of materials for various industrial applications.

Conduct of Practical Examination:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Scheme of Examination

1. ONE question from part -A: 30 Marks
2. ONE question from part -B: 50 Marks
3. Viva -Voice: 20 Marks
4. Total: 100 Marks

For detail Syllabus of all other subjects of BE Mechanical Engineering, 2018 scheme, visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results.

For all the other VTU 4th Sem ME Syllabus for BE 2018 Scheme, do visit Mechanical Engineering 4th Sem 2018 Scheme. For all the Select Subject 7 subjects refer to Select Subject 7 Scheme. The detail syllabus for mechanical measurements and metrology lab is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Experiments

PART A

1. Calibration of Pressure Gauge
2. Calibration of Thermocouple
3. Calibration of LVDT
4. Calibration of Load cell
5. Determination of modulus of elasticity of a mild steel specimen using straingauges.

PART B

1. Measurements using Optical Projector / Tool makers’ Microscope.
2. Measurement of angle using Sine Centre / Sine bar / bevelprotractor
3. Measurement of alignment using Autocollimator / Rollerset
4. Measurement of cutting tool for cesusing:
5. Measurements of Screw thread parameters using two wire or three-wire methods.
6. Measurements of surface roughness using Tally Surf/Mechanical Comparator
7. Measurement of gear tooth profile using gear tooth Vernier/Gear tooth micrometer
8. Calibration of Micrometer using slip gauges
9. Measurement using Optical Flats

Course Outcomes:

At the end of the course, the student will be able to:

1. CO1: Understand Calibration of pressure gauge, thermocouple, LVDT, load cell, micrometre.
2. CO2: Apply concepts of Measurement of angle using Sine Centre/ Sine Bar/ Bevel Protractor, alignment using Autocollimator/ Roller set.
3. CO3: Demonstrate measurements using Optical Projector/Tool maker microscope, Optical flats.
4. CO4: Analyse tool forces using Lathe/Drill tool dynamometer.
5. CO5: Analyse Screw thread parameters using 2-Wire or 3-Wire method, gear tooth profile using gear tooth Vernier/Gear tooth micrometre
6. CO6: Understand the concepts of measurement of surface roughness.

Conduct of Practical Examination:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Scheme of Examination:

1. ONE question from part -A: 30 Marks
2. ONE question from part -B: 50 Marks
3. Viva -Voice: 20 Marks
4. Total: 100 Marks

For detail Syllabus of all other subjects of BE Mechanical Engineering, 2018 scheme, visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results.

For all the other VTU 4th Sem ME Syllabus for BE 2018 Scheme, do visit Mechanical Engineering 4th Sem 2018 Scheme. For all the Select Subject 6 subjects refer to Select Subject 6 Scheme. The detail syllabus for mechanical measurements and metrology is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module-1

Introduction to Metrology: Definition, objectives of metrology, Material Standards, Wavelength Standards, Classification of standards, Line and End standards, Calibration of End bars. Numerical examples. Liner measurement and angular measurements: Slip gauges-Indian standards on slip gauges, Adjustable slip gauges, Wringing of slip gauges, Problems on building of slip gauges (M87, M112), Measurement of angle-sine bar, Sine centre, Angle gauges, Optical instruments for angular measurements. Autocollimator-Applications for measuring straightness and squareness.

Module-2

System of Limits, Fits, Tolerance and Gauging: Definitions, Tolerance, Tolerance analysis (addition & subtraction of tolerances) Inter changeability & Selective assembly. Class &grade of tolerance, Fits, Types of fits, Numerical on limits, fit and tolerance. Hole base system & shaft base system. Taylor’s principle, Types of limit gauges, Numerical on limit gauge design. Comparators: Functional requirements, Classification, Mechanical- Johnson Mikrokator, Sigma comparators, Dial indicator, Electrical comparators, LVDT, Pneumatic comparators- Principle of back pressure, Solex comparators. Optical comparators- Zeiss ultraoptimeter.

Module-3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module-4

Measurement system and basic concepts of measurement methods: Definition, Significance of measurement, Generalized measurement system, Static characteristics- Accuracy, Precision, Calibration, Threshold, Sensitivity, Hysteresis, Repeatability, Linearity, Loading effect, Dynamic characteristics- System response, Time delay. Errors in measurement, Classification of errors. Transducers: Transfer efficiency, Primary and Secondary transducers, Electrical transducers, Mechanical, Electronic transducers, Relative comparison of each type of transducers. Intermediate Modifying and Terminating Devices: Mechanical systems, Inherent problems, Electrical intermediate modifying devices, Input circuitry, Ballast circuit, Electronic amplifiers. Terminating devices, Cathode ray oscilloscope, Oscillographs.

Module-5

Applied mechanical measurement: Measurement of force, Torque, Pressure, Types of Dynamometers, Absorption dynamometer, Prony brake and Rope brake dynamometer, and Power Measuring Instruments. Use of elastic members, Bridgeman gauge, McLeod gauge, Pirani gauge. Measurement of strain and temperature: Theory of strain gauges, Types, Electrical resistance strain gauge, Preparation and mounting of Strain gauges, Gauge factor, Methods of strain measurement, temperature compensation, Resistance thermometers, Thermocouple, Law of thermocouple, Pyrometer, Optical pyrometer.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question Paper Pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Mechanical Measurements Beckwith Marangoni and Lienhard Pearson Education 6th Ed., 2006
2. Instrumentation, Measurement and Analysis B C Nakra, K K Chaudhry McGraw-Hill 4th Edition
3. Engineering Metrology R.K. Jain Khanna Publishers 2009

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detail Syllabus of all other subjects of BE Mechanical Engineering, 2018 scheme, visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results.

For detailed Syllabus of all other subjects of BE 4th Sem, 2018 scheme do visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.For all the other Mechanical Engineering 4th Sem 2018 Scheme VTU subjects do refer to Mechanical Engineering 4th Sem 2018. The detail syllabus for vtu 4th sem me select subject 6 syllabus for be 2018 scheme is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of BE 4th Sem, kindly visit VTU BE 4th Sem direct result link.

Wishing you great luck ahead.

For all the other VTU 4th Sem ME Syllabus for BE 2018 Scheme, do visit Mechanical Engineering 4th Sem 2018 Scheme. For all the Select Subject 6 subjects refer to Select Subject 6 Scheme. The detail syllabus for computer aided machine drawing is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Part A

Introduction: Review of graphic interface of the software. Review of basic sketching commands and navigational commands. Starting a new drawing sheet. Sheet sizes. Naming a drawing, Drawing units, grid and snap. Conversion of pictorial views into orthographic projections of simple machine parts (with and without section). Hidden line conventions. Precedence of lines. Sections of Solids: Sections of Pyramids, Prisms, Cubes, Tetrahedrons, Cones and Cylinders resting only on their bases (No problems on axis inclinations, spheres and hollow solids). True shape of sections. Conversion of pictorial views into orthographic projections of simple machine parts. Hidden line conventions. Precedence of lines. Conversion of pictorial views into orthographic projections of simple machine parts (with section planes indicated on the part). Thread Forms: Thread terminology, sectional views of threads. ISO Metric (Internal & External), BSW (Internal & External) square and Acme. Sellers thread, American Standard thread. Fasteners: Hexagonal headed bolt and nut with washer (assembly), square headed bolt and nut with washer (assembly) simple assembly using stud bolts with nut and lock nut. Flanged nut, slotted nut, taper and split pin for locking, counter sunk head screw, grub screw, Allen screw.

Part B

Keys: Parallel key, Taper key, Feather key, Gib-head key and Woodruff key. Joints: Cotter joint (socket and spigot), knuckle joint (pin joint) for two rods. Couplings: Split Muff coupling, Protected type flanged coupling, pin (bush) type flexible coupling, and universal coupling (Hooks’ Joint)

Part C

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

At the end of the course, the student will be able to:

1. CO1: Identify the national and international standards pertaining to machine drawing.
2. CO2: Understand the importance of the linking functional and visualization aspects in the preparation of the part drawings
3. CO3: Apply limits and tolerances to assemblies and choose appropriate fits for given assemblies.
4. CO4: Interpret the Machining and surface finish symbols on the component drawings.
5. CO5: Preparation of the part or assembly drawings as per the conventions.

Scheme of Examination:

Two questions to be set from each Part A, part B and Part C. Student has to answer one question each from Part A and Part B for 25 marks each and one question from Part C for 50 marks.

INSTRUCTION FOR COMPUTER AIDED MACHINE DRAWING EXAMINATION

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Text Books:

1. Machine Drawing K.R. Gopala Krishna Subhash Publication 2005
2. Machine Drawing N.D.Bhat&V.M .Panchal Charoratar publishing house 2005

Reference Books:

1. A Text Book of Computer Aided Machine Drawing S. Trymbaka Murthy CBS Publishers, New Delhi 2007
2. Engineering drawing P.S.Gill S K Kataria and Sons 2013
3. Machine Drawing N. Siddeshwar, P. Kanniah, V.V.S. Sastri Tata McGraw Hill 2006

For detail Syllabus of all other subjects of BE Mechanical Engineering, 2018 scheme, visit Mechanical Engineering 4th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results.