1st Sem, Aero Diploma

15EE02P: Basics of Electrical and Electronics Engg Lab Aero 1st Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Basics of Electrical and Electronics Engg Lab detail DTE Kar Diploma syllabus for Aeronautical Engineering (AE), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15EE02P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other aero 1st sem syllabus for diploma c15 scheme dte karnataka you can visit Aero 1st Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for basics of electrical and electronics engg lab is as follows.

Pre-requisites:

Basic Electrical and Electronics Engineering theory in Diploma curriculum.

Course Objectives:

To provide practical knowledge about the DC &AC circuits, different wiring circuits, Battery, Relay, three phase AC motor, Panel board, semiconductor diodes, rectifiers and basic logic gates.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

List of Graded Experiments:

  1. Construct a suitable circuit to verify Ohm’s law.
  2. Rig up and test the wiring circuit to control a lamp and a three pin socket independently.
  3. Rig up and test the wiring circuit to control two lamps independently.
  4. Construct and test fluorescent lamp circuit.
  5. Construct and test the staircase wiring circuit (control from 2 places).
  6. Construct and test Meter board wiring using single phase Energymeter, MCB/ELCB, Kit-kat fuse and neutral link.
  7. Build and test a circuit to measure power and power factor in a single phase ac circuit.
  8. Construct a circuit to measure energy in KWh in a single phase ac circuit.
  9. Construct a suitable circuit to start and reverse the direction of three phase induction motor using DOL/ Star-Delta/ Auto-Transformer starter.
  10. Test and make a report of the fully charged and discharged conditions of a given Lead-acid battery.
  11. Construct a circuit using a single Relay to turn ON a lamp connected to NC and to turn OFF another lamp connected to NO contacts of Relay.
  12. Construct a circuit to obtain the forward bias characteristic of a Diode.
  13. Construct and test Zener diode as a voltage regulator.
  14. Build and test halfwave rectifier circuit.
  15. Build and test full wave bridge rectifier circuit (without filter).
  16. Construct a circuit to verify the truth tables of NOT,AND, OR, NOR and NAND gates.
  17. Identify and draw the layout diagram for a simple PANEL BOARD/consisting of bus bars, CB/MCB/ELCB, meters, HRC fuses, magnetic contactors, cables, earthing points.

Reference Books:

  1. Experiments in Basic Electrical Engineering by S.K.Bhattacharya, New Age International Publications, 2007 Edition.
  2. A Text book on Laboratory courses in Electrical Engg. by S.G. Tarnekar and P.K.Karbanda.

e-Resources:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Course Delivery:

The Course will be delivered through Tutorial, classroom interaction, group discussion, practical exercises and assignments.

Tutorial – 1Hr:

Staff-in-charge will

  1. Explain the concept of experiment to be conducted.
  2. Teach required selection of components/ meters/ equipment/ suitable wires for the experiment to be conducted.
  3. Ask students to draw the circuit.
  4. Give clear instructions about safety precautions to be followed while conducting experiment.

Conduction/ Execution- 2 Hr:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Suggested Student Activities:

Each Student has to prepare a self-hand written report of 3 pages or solved in a blue book considering any one of the following topics.

  1. Mini-Projects: Like preparing extension box, switch box and wiring models,
  2. Make a plan of building wiring for a lab/ room, etc.
  3. Visit nearby Battery charging shop or show room and prepare a report of the visit.
  4. Prepare a report of the conditions of batteries available in the Polytechnic.
  5. For given voltage, current, Ah ratings of individual cell, and required voltage and current rating of battery, prepare a report of calculations for number of cells and their method of connections.
  6. List out the different protective devices used in your laboratories or house with their ratings.
  7. List out the different types of wiring systems used in your laboratories or house with their representation.

Lab Equipment Requirement:

  1. Dual Channel 30 V, 2 A continuously variable DC Regulated Power Supply with Current and Overload Protection 05 Nos.
  2. +/- 15 V, 2 A, fixed DC Regulated Power Supply 05 Nos.
  3. Portable Moving Coil DC Voltmeters
    1. 0 – 1 V
    2. 0 – 10 V
    3. 0 – 30 V Each 05 Nos.
  4. Portable Moving Iron AC Voltmeters
    1. 0 – 300 V
    2. 0 – 600 V Each 05 Nos.
  5. Portable Moving Coil DC Ammeters
    1. 0 – 100 mA
    2. 0 – 1 A
    3. 0 – 2 A Each 05 Nos.
  6. Portable Moving Iron AC Ammeters
    1. 0 – 2 A
    2. 0 – 5 A
    3. 0 – 10 A Each 05 Nos.
  7. Watt-meters
    1. 150/ 300V, 2 A, UPF
    2. 300/ 600 V, 5/ 10 A, LPF Each 02 Nos.
  8. Rheostats – 25 Ohms, 50 Ohms, 150 Ohms, 220 Ohms (all rated at 3 A. Each 05 Nos.
  9. Rheostat Loads s – 1 KW, 230 V 02 Nos.
  10. Wire wound Resistors- 5 Ohms 2 Watts, 25 Ohms 5 Watts, 330 Ohms 2 Watts, 560 Ohms 2 Watts, etc. Each 05 Nos.
  11. Soldering Iron 60 W 05 Nos.
  12. Fluorescent lamp sets 10 Nos.
  13. Single Phase Energy meter 10 A, 230 V, 50 Hz, Digital type 05 Nos.
  14. Multi-meter Digital 06 Nos.
  15. Duel Trace Oscilloscope – 30 MHz 02 Nos.
  16. Three Phase Induction Motors :1 HP – 440 V 50 Hz,2 HP -440 V 50 Hz. Each 02 Nos.
  17. Three phase DOL, Star-Delta, Auto transformer starter Each 02 Nos.
  18. UPS 1 KVA 01 Nos.
  19. Battery Lead-Acid type, 140 A-hr and Hydrometers 02 Nos.
  20. I C Trainer kit 05 Nos
  21. Digital IC’s 7400, 7402, 7404, 7408, 7486 etc Each 10 Nos.
  22. Wooden Wiring board (2×3) ft 10
  23. Wiring accessories
    1. PVC conduit – -10 lengths
    2. Cap and casing – – 10 lengths
    3. Switches Single Pole-5A, 230 V
    4. Switches two way – 5 A, 230 V
    5. 3 Pin Sockets 5A, 230 V
    6. Bulb Holders -5 A, 230 V
    7. 3 Pin Plug 5A, 230 V
    8. 60 Watts Lamps
    9. 100 Watts Lamps
    10. 15 W CFL lamps
    11. Copper Wires of sizes ‘.5 mm2’, ‘5. mm2’, ‘4 mm2 -1’ coil each
    12. Gang boxes (1+1, 2+1, 2+2)
    13. Kit -Kat fuses 5A, 15 A
    14. MCB 16 A & 32 A/ 230 V, Single and Double Pole
    15. ELCB 16 A & 32 A/ 230 V, Double Pole
    16. Neutral link-16 A, 230 V
    17. Screws of assorted sizes
    18. Testers Each 10 Nos.
  24. Electronic Components
    1. Diodes -BY 127 and IN 4001
    2. Zener Diodes ‘-2.’ V, ‘6.’ V, ‘8.’ V
    3. Relays – solid state Sugar cube type, SPST, Coil 6V, Power circuit 230 V, 5 A.
    4. Spring Boards
    5. Bread Boards
    6. Tag Boards. Each 10 Nos.
  25. Simple PANEL BOARD/ CUBICAL consisting of bus-bars, CB/MCB/ELCB, meters, HRC fuses, magnetic contactors, cables, earthing points. 1 No

For detail syllabus of all other subjects of BE Aero, C15 scheme do visit Aero 1st Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

View All Post

Leave a Reply

Your email address will not be published. Required fields are marked *

*