Installation, Maintenance and Repair of Electrical Equipment Electrical Eng 6th Sem BTEUP Syllabus 2019-2020

Installation, Maintenance and Repair of Electrical Equipment detail BTEUP syllabus for Electrical Engineering, effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other bteup syllabus 6th sem electrical eng 2019-2020 you can visit BTEUP Syllabus 6th Sem Electrical Eng 2019-2020 Subjects. The detail syllabus for installation, maintenance and repair of electrical equipment is as follows.

Rationale:

In his career as a supervisor, an electrical engineering technician will be called upon to inspect, test and modify the work done by skilled workers or artisans working under him. Many a times, it will become necessary for him to demonstrate the correct method and procedure of doing certain operations. Normally manufacturers of heavy electrical equipment provide service manuals, instructions for installation, maintenance and fault location. Indian Electricity Rules and Indian Standard Specifications also provide enough guidelines. This syllabus has been designed to provide certain guidelines and broad principles regarding the above activities. Appropriate field trips will reinforce the learning.

Learning Outcomes:

After undergoing the subject, the students will be able to:

• Erect/install various electrical equipment as per IE Rules Act by adopting all safety measures.
• Prepare specifications for different items required for transmission lines.
• Design and excavation of cable trenches.
• Lay underground cables
• Test cables and their termination.
• Check HT/LT circuit breakers, transformers and related equipment in a substation
• Carry out earthing, make earth pits and measure earth resistance values.
• Find fault in a transmission/distribution system.
• Carry out preventive maintenance to minimize breakdowns.

1. Tools and Accessories (14 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

2. Installation (40 Periods)

1. Installation of transmission and Distribution Lines: Erection of steel structures, connecting jumpers, tee-off points, joints and dead ends; crossing of roads, streets, power/telecommunication lines and railway line crossings, clearances; earthing of transmission lines and guarding, spacing and configuration of conductors: Arrangement for suspension and strain insulators, bird guards, anti-climbing devices and danger plates; sizes of conductor, earthwire and guy wires. Laying of service lines, earthing, provision of service fuses, installation of energy meters
2. Laying of Underground Cables: Inspection, storage, transportation and handling of cables, cable handling equipment, cable laying depths and clearances from other services such as: water, sewerage, gas, heating and other mains, and also a series of power and telecommunication cables and coordination with these services, excavation of trenches, direct cable laying, including laying of cable from the drum, laying cable in the trench, taking all measurements and making drawings, back filling of trenches with earth or sand, laying protective layer of bricks etc,) laying of cables into pipes and conduits and within buildings.
3. Elementary idea regarding, inspection and handling of transformers; pole mounted substations, plinth mounted substations, grid substation, busbars, isolators, voltage and current transformers, lightning arrestors, control and relay panels, HT/LT circuit breakers, LT switches, installation of power/distribution transformers, dehydration. Earthing system, fencing of yard, equipment foundations and trenches etc.
4. Testing of various electrical equipment such as electrical motor, transformers, cables, and generators, motor control centres, medium voltage distribution panels, power control centres, motor control centres, lighting arrangement, storage, pre-installation checks, connecting and starting, pre-commissioning checks, drying out
5. Testing of Transformers: Typetest, oil testing of transformers

3. Maintenance (30 Periods)

1. Types of maintenance, maintenance schedules, procedures
2. Maintenance of Transmission and Distribution System Authorized persons, danger notice, caution notice, permit to work, arranging of shutdowns personally, temporary earthing, cancellation of permit and restoration of supply. Patrolling and visual inspection of lines – points to be noted during patrolling from ground; special inspections and night inspections; Location of faults using Meggar, effect of open or loose neutral connections, provision of proper fuses on service lines and their effect on system, causes of dim and flickering lights.
3. Maintenance of Distribution Transformers: Transformer maintenance and points to be attended to in respect of various items of equipment, Checking of insulation resistance, transformer oil level and BDV test of oil, measurement of earth resistance
4. Maintenance of Grid Substations: Checking and maintenance of busbars, isolating switches, HT/LT circuit breakers, LT switches. Power transformers
5. Maintenance of Motors: Over hauling of motors, preventive maintenance, trouble shooting of electric motors
6. Domestic Installation: Introduction, testing of electrical installation of a building, testing of insulation resistance to earth, testing of insulation and resistance between conductors, continuity or open circuit test

Instructional Strategy:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Means of Assessment:

1. Assignments and quiz/class tests, mid-term and end-term written tests, model/prototype making
2. Actual laboratory and practical work, model/prototype making, assembly and disassembly exercises and viva-voce

List of Experiments:

1. Testing of Insulation Resistance of PVC in PVC wire, measurement of winding resistance of a motor.
2. Wiring of tube light connection with starter and choke.
3. Oil testing of a transformer and note its breakdown value.
4. Make a alarm circuit.
5. Make ON/OFF control circuit to run an electric induction motor (Single Phase)
6. Make a circuit to run a ceiling fan.

Text Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

http://swayam.gov.in

For detail syllabus of all other subjects of BE Electrical Eng, effective from 2019-2020 do visit Electrical Eng 6th Sem BTEUP syllabus for 2019-2020.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.