Electrical Instrumentation and Measurement Electrical Eng 3rd Sem BTEUP Syllabus 2019-2020

Electrical Instrumentation and Measurement detail BTEUP syllabus for Electrical Engineering, effective from 2019-2020, is collected from BTEUP 2017 Syllabus official website and presented for diploma students. PDF download is possible from official site but you can download the istudy mobile app for syllabus on mobile. The course details such as exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other bteup syllabus 3rd sem electrical eng 2019-2020 you can visit BTEUP Syllabus 3rd Sem Electrical Eng 2019-2020 Subjects. The detail syllabus for electrical instrumentation and measurement is as follows.

Rationale:

Diploma holders in Electrical Engineering have to work on various jobs in the field as well as in testing laboratories and on control panels, where he performs the duties of installation, operation, maintenance and testing by measuring instruments. Persons working on control panels in power plants, substations and in industries will come across the use of various types of instruments and have to take measurements.
Instruments used to read and observe the general electrical quantities like current, voltage, power, energy, frequency, resistance etc and their wave shapes, have been incorporated in this subject. So the technician will know the construction and use of various types of electrical instruments.

Learning Outcomes:

After undergoing the subject, student will be able to:

• Connect and repair different indicating and recording instruments in electric circuits
• Measure different electrical quantities like current, voltage, power, energy, power factor, frequency etc.
• Select the type and range of instruments to be used for the job
• Operate CT (Current Transformer) and PT (Potential Transformer) for measurement
• Select and use suitable sensors for measurements of different non-electrical quantities
• Use instruments for measuring different electrical quantities
• Use sensors for measuring non electrical quantities
• Operate on smart metering system in industry

1. Introduction to Electrical Measuring Instruments: (05 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

2. Ammeters and Voltmeters (Moving coil and moving iron type) (06 Periods)

1. Concept of ammeter and voltmeters and difference between them
2. Construction and working principles of moving Iron and moving coil instruments
3. Merits and demerits, sources of error and application of these instruments

3. Wattmeters (Dynamometer Type) (06 Periods)

Construction, working principle, merits and demerits of dynamometer type wattmeter, Digitalwattmeters.

4. Energymeter (10 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

5. Miscellaneous Measuring Instruments: (18 Periods)

1. Construction, working principle and application of Meggar, Earth tester(analog and digital) Multimeter, Frequency meter (dynamometer type) single phase power factor meter (Electrodynamometer type). Working principle of synchroscope and phase sequence indicator, tong tester (Clamp-on meter)
2. Instrument Transformers: Construction, working and applications
1. CT
2. PT

6. Electronic Instruments: (06 Periods)

1. Cathode Ray Oscilloscope: Block diagram, working principle of CRO and its various controls. Applications of CRO.
2. Digital multi-meter (only block diagram) and Applications

7. LCR meters. (04 Periods)

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

8. Power Measurements in 3-phase circuits by (04 Periods)

1. Two wattmeter method in balanced and unbalanced circuits and simple problems
2. Three wattmeter method

9. Transducers (10 Periods)

Introduction, Types of Transducers (1 phase,3 phase)
Basic concept of pressure measurement, flow measurement, level measurement, displacement measurement using transducers

10. Measurement of Temperature (09 Periods)

Different types of thermometers, thermocouple, resistance temperature detector and their construction, principle and working. Thermal Imager Camera (Concept)

11. Smart Metering System (06 Periods)

AMI (Advance Metering Infrastructure), Functions of AMI, cyber Security, Advantages
Smart Meter Technology: AMR (Automatic Metering Reading), inverse/reverse metering system in solar power plant, MRI (Meter Reading Instrument)

List of Experiments:

1. Use of analog and digital multimeter for measurement of voltage, current (A.C/D.C) and resistance
2. Measurement of pressure by using LVDT
3. To measure the value of earth resistance using earth tester.
4. To measure power, power factor in a single-phase circuit, using wattmeter and power factor meter and to verify results with calculations.
5. Measurement of power and power factor of a three-phase balanced load by two wattmeter method.
6. Measurement of voltage and frequency of a sinusoidal signal using CRO and draw wave shape of signal.
7. Measurement of power in a 3 phase circuit using CT, PT and 3-phase wattmeter.
8. Use of LCR meter for measuring inductance, capacitance and resistance.
9. To record all electrical quantities from the meters installed in the institution premises.
10. To measure Energy at different Loads using Single Phase Digital Energy meter
11. Measurement of temperature by using thermister/Thermal Imager
12. Calibration of single phase and three-phase energy meter and digital energy meter

Instructional Strategy:

After making the students familiar with measuring instruments, they should be made conceptually clear about the constructional features and make them confident in making connection of various measuring instruments. Teacher should demonstrate the application of each measuring instrument in laboratory and encourage students to use them independently.

Means of Assessment:

1. Assignments and quiz/class tests, mid-term and end-term written tests, model/prototype making
2. Actual laboratory and practical work, model/prototype making, assembly and disassembly exercises and viva-voce

Text Books:

1. Electrical Measurements and Measuring Instruments by Golding and Widdis; Wheeler Publishing House, New Delhi
2. Electrical Measurements and Measuring Instruments by SK Sahdev, Uneek International Publications, Jalandhar
3. A Course in Electrical Measurement and Measuring Instruments by AK Sawhney and PL Bhatia; Dhanpat Rai and Sons, New Delhi
4. Electric Instruments by D. Cooper
5. Experiments in Basic Electrical Engineering by SK Bhattacharya and KM Rastogi, New Age International (P) Ltd., Publishers, New Delhi
6. Electronics Instrumentation by Umesh Sinha, Satya Publication, New Delhi
7. Basic Electrical Measurements by Melville B. Staut.
8. Electrical Measurement and Measuring Instruments by JB Gupta, SK Kataria and Sons, New Delhi
9. Electrical Measurement and Measuring Instruments by ML Anand, SK Kataria and Sons, New Delhi
10. e-books/e-tools/relevant software to be used as recommended by AICTE/UBTE/NITTTR, Chandigarh

Reference Books:

http://swayam.gov.in

For detail syllabus of all other subjects of BE Electrical Eng, effective from 2019-2020 do visit Electrical Eng 3rd Sem BTEUP syllabus for 2019-2020.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.