313353: Polymer Composites Syllabus for Polymer Technology 3rd Sem K Scheme MSBTE PDF

Polymer Composites detailed Syllabus for Polymer Technology (PO), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.

For all other MSBTE Polymer Technology 3rd Sem K Scheme Syllabus PDF, do visit MSBTE Polymer Technology 3rd Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for polymer composites is as follows.

Rationale

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

Students will be able to achieve & demonstrate the following COs on completion of course based learning

1. Apply the knowledge of polymer composites for various applications.
2. Choose relevant polymer matrix for given application of composites.
3. Use suitable reinforcement for specified application of composites.
4. Prepare polymer composite using relevant processing technique.
5. Uses Nano, Bio-polymer composite for different applications.

Unit I

Introduction of Composites 1.1 Composite: Concept, component of composites 1.2 Functions of components: fiber, matrix and fillers. 1.3 Classification of composites based on: geometry of reinforcement, fiber length and application 1.4 Advantages and limitations of polymer composites 1.5 Additives of composites: Curing agent, accelerators, coupling agents, inhibitors, release agents (Their functions and examples). Chalk-Board Presentations

Unit II

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

Polymer composite reinforcements 3.1 Types of reinforcement, effect of loading and orientation on strength of composites. 3.2 Preparation, properties and applications of glass fiber, carbon fiber, graphite fiber, aramid fiber, natural fibers: Balsa, wood, and bamboo, polymeric fibers: Nylon, Polyester 3.3 Types of glass fibers Lecture Using Chalk-Board Presentations

Unit IV

Processing of Composites 4.1 Hand lay-up, Spray up, Vacuum bag, Pressure bag moulding, Pultrusion, Filament winding, Injection moulding, Resin transfer. 4.2 Compression molding: Bulk molding compound (BMC), Sheet molding compound (SMC) manufacturing. 4.3 Faults, causes and remedies in composites processing techniques. Lecture Using Chalk-Board Presentations Demonstration Video Demonstrations

Unit V

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Suggested Micro Project / Assignment

Micro project

• Manufacturing: Prepare laminate at room temperature and elevated temperature. Identify and apply best practices for disposal of waste material for environmental sustainability.
• b. Reinforcement: Prepare laminate by varying the proportion of resin and reinforcement. Identify and apply bet practices for disposal of resins and wastes for environmental sustainability.
• c. Laminates: Test the mechanical properties of laminate. Prepare a technical report to be submitted along with standard operation procedures.
• d. Processing Techniques: analyze composite processing techniques (download PPT/videos for best practices) with special reference to environment sustainability and give class presentation

Assignment

• a. Collect information of industries manufacturing glass fibers. Prepare a report.
• b. Prepare a chart for applications of various forms of fibers. Make a class presentation.
• c. Collect literature on the application of hybrid and sandwich composites. Prepare a report.
• d. Collect information on industrial and domestic FRP products (manufacturers, suppliers, manufacturing techniques). Make a class presentation.

Laboratory Equipment

1. Density meter, 50 ml beaker, weighing balance( range up to 500gm, 240 V, 50 Hz). 1
2. Spray gun, wooden/metal open mold, roller, beaker and stirrer 11
3. Flexible mould, winder, filament winding machine 12
4. Brush, squeezer 14
5. Rubber mould, breaker (200 ml) 15
6. Muffle Furnace (temperature rage up to 900 degree centigrade, 240V, 50 Hz, size 12X12X24 inch ) and weighing balance. 2
7. Watch, Weighing balance( up to 500gm). 3
8. Weighing balance( up to 500gm), beaker (50 ml.) 4,13
9. Scale, sizer 5,6,7 0
10. Wooden/metal open mold, brush, squeezer, roller, beaker and stirrer 8,9,10

Learning Materials / Books

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Learning Websites & Portals

1. http://composites .about.com/od/aboutcarbon/a/Understanding-Cfrp-Composites.ht m Carbon fiber polymer composites
2. http://mimoza.marmara.edu.tr/~altan.turkeli/files/cpt-9-cent rifugal_casting.pdf Casting
3. https://www.sciencedirect.com/topics/materials-science/polym er-composite Automotive polymer composites
4. https://polyexcel.com.br/en/product-news/understand-what-are -polymer-composites/ Polymer composites
5. https://www.youtube.com/watch?v=fZDvZZOw7qs Pultrusion animation
6. https://www.youtube.com/watch?v=ign6W5ENJAA Filament winding animation
7. https://www.mdpi.com/2073-4360/15/3/712 Polymer composite technology

For detail Syllabus of all other subjects of Polymer Technology, K scheme do visit Polymer Technology 3rd Sem Syllabus for K scheme.

For all Polymer Technology results, visit MSBTE Polymer Technology all semester results direct links.