Transducers and Measurement System detailed Syllabus for Instrumentation & Control (IC), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Instrumentation & Control 3rd Sem K Scheme Syllabus PDF, do visit MSBTE Instrumentation & Control 3rd Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for transducers and measurement system is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Use the appropriate transducer for measuring various parameters.
- Measure temperature using appropriate temperature transducers for a given application.
- Measure pressure using appropriate Pressure transducers for a given application.
- Use various types of flow transducers to measure flow rate
- Select various types of level transducers for level measurement
Unit I
Basics of Measurement and Transducers. 1.1 Functions of each block of the measurement system ,Classification of Instruments 1.2 Transducer: Need, Difference between Sensor and Transducer , Classification -Active and Passive, Analog and Digital, Primary and Secondary,Mechanical and Electrical 1.3 Electrical Transducers: a) Resistive transducer-Linear and Angular potentiometers. strain gauge- types, Gauge factor. b) Capacitive Transducer. c) Inductive transducer -LVDT, RVDT d)Piezoelectric transducer 1.4 Selection criteria of transducers 1.5 Standards of measurements: a) International b) primary c) Secondary d) working , Calibration : a) Primary b) Secondary c) Direct d) Indirect 1.6 Digital Multimeter: Use, functional block Diagram, Lecture Using Chalk-Board Video Demonstrations Flipped Classroom Hands-on Collaborative learning
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Pressure and Force measurement 3.1 Definition of Pressure and its units, Types – Absolute, Gauge, Atmospheric, Vacuum 3.2 Pressure measuring devices: classification, working, and applications, Manometer- Non Elastic pressure transducers : a) U tube, b) Inclined Tube, c) Well type manometer , Elastic pressure transducer: a) Bourdon Tube, b) Bellows, c) Diaphragm, d) Capsule , Electrical pressure transducers: a) Bourdon tube with LVDT, b) Bellow with LVDT , c) Diaphragm with Strain gauge 3.3 Specifications of electrical pressure transducer 3.4 Calibration of pressure gauge using dead weight tester 3.5 Force meter : working and application of strain gauge load cell ,Piezoelectric Load cell Lecture Using Chalk-Board Video Demonstrations Flipped Classroom Hands-on Collaborative learning
Unit IV
Flow Measurement 4.1 Definition of Flow and units of Flow, Types of Flow -a)Laminar, b) turbulent, Reynolds number 4.2 Classification ,construction, working , applications of: Variable head flow meter: a) orifice plate , b) Venturimeter, c) flow nozzle, d) pitot tube , Variable area flow meter – Rotameter , Electrical flow meter: Turbine flow meter, Electromagnetic Flow meter, Ultrasonic flow meter- Time difference and Doppler Type. Hot wire anemometer. Vortex flow meter 4.3 Working and applications of Positive displacement meter-nutating disc type 4.4 Working and applications of Coriolis Mass flow meter 4.5 Technical specifications of various flow meters Lecture Using Chalk-Board Video Demonstrations Flipped Classroom Hands-on Collaborative learning
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Suggested Micro Project / Assignment
Micro project
- Develope Fire alarm system using Thermistor
- Make a circuit of Speed control of fan using Thermistor
- Make a model of bellows using paper
- Use float type level sensor for indication of level of water tank.
- Build a model of level measurement using float switch
- Dismantle C shaped bourdon tube and make a display board showing each part of it
- List the sensors and their function used in an industry
Assignment
- Make a chart of comparison of different RTD’s
- Make a chart of comparison of Different types of Thermocouples on the basis of material, sensitivity, linear range
- Make a report on different transducers used in weather monitoring system.
- Identify different transducers used in smart traffic management system.
- Identify sensors used in car over speeding monitoring system .
- Explain different sensors used in dish washer system
- Describe Smart garbage segregation systems using sensors
- Carry out market survey of various Temperature/Pressure/flow/level etc transducers on the basis of suggested parameters and submit a report
- Prepare a report on sensors used in basic and advance model of automobile.
Visit
- Visit any process industry and identify different sensors used for Flow, Pressure, Temperature, Level measurement
Laboratory Equipment
- 5-100mm linear potentiometer displacement sensor , Displacement range 0-3000 , single turn angular potentiometer 1,16
- Orifice meter measurement setup: 1 “line size, concentric type, MOC-SS, U tube manometer 400 mm height. Range 0-1000LPH, Digital display 11
- Ventury flow measurement setup: 1 “line size, MOC-SS, U tube manometer 400 mm height Range 0-1000LPH, Digital display 12
- Rotameter flow measurement setup: Range 0-1000 LPH, Glass tube body, Bob Material-SS. connection l ”, Mounting inlet bottom top outlet. 13
- Capacitance level measurement: Input range 0-500 mm, power supply 230 V ac , 2 wire capacitance type, top mounted, Digital display indication of 0 – 500mm. 14
- Air purge level measurement: Level tank ,height 0-500mm ,air pressure 12 regulator ¼” valve ,air compressor with 1/4″ connection and pressure gauge power supply 230 Vac, Level indication 15
- Trainer kit for level measurement using float and linear and angular potentiometer 16
- LVDT trainer kit: Displacement range +/- 20 mm. Accuracy of+/- 2% Primary Excitation 4 KHZ and 1 Volt, RMS Output : Digital display of+/- 20mm 2,10
- Strain gauge trainer kit: Strain gages of 350 ohms, Accuracy:+/- 1 % Power Supply 230 Vac, maximum of 5-kg load, Digital indication 3
- RTD temperature measurement: Temp range 0-100 °c , temp bath, RTD Type pt100, copper RTD, Nickel RTD, accuracy +/- 1%, power supply 230v ac 4,6
- Thermocouple temperature measurement: Temp range 0-200uc, temp bath, Thermocouple K Type ,accuracy of +/- 1 % , power supply 230v ac, digital indication of temp 5,7
For detail Syllabus of all other subjects of Instrumentation & Control, K scheme do visit Instrumentation & Control 3rd Sem Syllabus for K scheme.
For all Instrumentation & Control results, visit MSBTE Instrumentation & Control all semester results direct links.