313330: Measurements & Automation Basics Syllabus for Automation & Robotics 3rd Sem K Scheme MSBTE PDF

Measurements & Automation Basics detailed Syllabus for Automation & Robotics (AO), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.

For all other MSBTE Automation & Robotics 3rd Sem K Scheme Syllabus PDF, do visit MSBTE Automation & Robotics 3rd Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for measurements & automation basics is as follows.

Rationale

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

Students will be able to achieve & demonstrate the following COs on completion of course based learning

1. – Interpret the characteristics of measuring instrument.
2. – Use relevant instrument to measure specified parameters.
3. – Maintain signal conditioning and data acquisition systems.
4. – Identify different components of automation system.
5. – Identify different components of robotic system.

Unit I

Fundamentals of Electrical and Electronics Measurements 1.1 Fundamentals of measuring instrument 1.2 Types of measuring instruments: Analog, digital, electrical and electronics 1.3 Compare analog and digital instruments 1.4 Static and dynamic characteristics of instruments 1.5 Calibration(need and methods:direct,indirect)standards of Instrument 1.6 Errors in measurement, types of errors, sources of errors Lecture Using Chalk-Board Presentations

Unit II

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

Data Acquisition System 3.1 Signal conditioning: Need, types of signal conditioning (block diagram of AC and DC signal conditioners) 3.2 Filter, isolator, amplifier and converter as a signal conditioner (only function) 3.3 Data Acquisition Systems (DAS): Need, types (single channel, multi-channel and computer based) 3.4 Comparison of types of DAS 3.5 Data loggers: Concept and applications Lecture Using Chalk-Board Presentations

Unit IV

Basics of Automation System 4.1 Need and benefits of automation system 4.2 Application areas: Process industries, building, robotics, railways, infrastructure development, aerospace, automobiles electrical distribution, medical, telecommunication etc. 4.3 Automation hierarchy:Basic components and function of each component 4.4 Types of automation system: Fixed, programmable, flexible machine automation, process automation,factory automation 4.5 Different systems used in industrial automation: PLC, HMI, SCADA, DCS, drives Lecture Using Chalk-Board Video Demonstrations Presentations

Unit V

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Suggested Micro Project / Assignment

Micro project

• Design practical model for measurement of linear or angular displacement using potentiometer and calculate its sensitivity.
• Build and test I to V converter circuit.
• Design and simulate any one signal conditioning circuit using open source simulating software.

Activity

• Prepare activity report on calibration, its need and procedure for a measuring instrument.
• Market survey of electronic measuring instruments used in laboratory.
• Prepare market survey report of major PLCs used in industry with their specifications.
• Prepare detailed informative chart of static and dynamic characteristics of measuring instrument.

Assignment

• Identify all controls of a DSO available in laboratory and give its specifications as per data sheet.
• Prepare report on a Robotic system with the observations of industrial visit to any industry based on robotic system.
• Identification various automation systems available in day to day life and draw schematic of any system.

Laboratory Equipment

1. Digital multimeter 0-10A, 0-600V, 0-10 Mega ohm 1,2,4,8,9,15,16
2. Analog multimeter 0-10 A, 0-600 V, 0-10 Mega ohm 1,3
3. Portable data acquisition system: 8 bit ADC/channel 4 analog voltage inputs powered by USB. 11
4. Input and Output devices for PLC: like Lamp, DC Motor, Proximity sensors, Thermocouple/RTD, Red, green, yellow LEDs, Stepper Motor, limit switches, push button 17,18,19,20,21,22,23
5. IEC 1131-3 compatible PLC with programming Software and interfacing hardware, user manual, (complete PLC trainer system) with HMI 17,18,19,20,22,23,21
6. Robotic system: 6 DoF, 8Kg Payload, arm range:930 mm,max speed 10.5 mm/sec.with compatible software 24,25
7. Computer system installed with required simulation software. 26,27,28,29
8. Any open source or online simulation software. 26,27,28,29
9. Function generator: Frequency ranges 0.1Hz to 11Mz,Pulse and ramp, aspect ratio 95:5 5,6,7
10. Digital storage oscilloscope :BW 60 MHz Dual channel 6,7

Suggested Learning Materials / Books

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Learning Websites & Portals

1. https://youtu.be/tN7iAzVEqa0? feature=shared NPTEL lecture on measurement
2. https://youtu.be/fg9No42IjnM? feature=shared How potentiometer works(linear and rotary type potentiometer)
3. https://youtu.be/tw-79FiRYKA? feature=shared What is industrial automation
4. https://youtu.be/uOtdWHMKhnw? feature=shared Programmable logic controller basics explained -automation engineering
5. https://youtu.be/E2WNPXJf-Kw? feature=shared PLC Introduction,PLC basics, Components of PLC,modular PLC, Modules (input Output)
6. https://youtu.be/kujHQgK352o? feature=shared What is HMI
7. https://youtu.be/uxKyLTMv9js? feature=shared How to do measurements using digital storage oscilloscope (DSO)

For detail Syllabus of all other subjects of Automation & Robotics, K scheme do visit Automation & Robotics 3rd Sem Syllabus for K scheme.

For all Automation & Robotics results, visit MSBTE Automation & Robotics all semester results direct links.