Production Drawing detailed Syllabus for Mechanical Engineering (ME), K scheme PDF has been taken from the MSBTE official website and presented for the diploma students. For Subject Code, Subject Name, Lectures, Tutorial, Practical/Drawing, Credits, Theory (Max & Min) Marks, Practical (Max & Min) Marks, Total Marks, and other information, do visit full semester subjects post given below.
For all other MSBTE Mechanical Engineering 3rd Sem K Scheme Syllabus PDF, do visit MSBTE Mechanical Engineering 3rd Sem K Scheme Syllabus PDF Subjects. The detailed Syllabus for production drawing is as follows.
Rationale
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Course Outcomes:
Students will be able to achieve & demonstrate the following COs on completion of course based learning
- Construct an auxiliary view of given object.
- Use convention for representation of material and mechanical components.
- Interpret and draw production drawing.
- Prepare assembly drawing using given details.
- Prepare detail drawing based on the given assembly drawing/data.
Unit I
Auxiliary View 1.1 Auxiliary planes and views. 1.2 Draw Auxiliary view from the given orthographic views. 1.3 Complete the partial view from the given auxiliary and other principal view. Lecture Using Chalk-Board Model Demonstration Video Demonstrations
Unit II
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Unit III
Production Drawing 3.1 Limits, Fits and Tolerances: Definitions, introductions to ISO system of Tolerance. Dimensional tolerances: Terminology, selection and representation of dimensional tolerance- number and grade method. Definitions concerning Tolerancing and Limits system, unilateral and bilateral tolerance, Hole and shaft basis systems, Types of fits-Clearance, transition and Interference, Selection of fit for engineering applications. Calculation of limit sizes and identification of type of fit from the given sizes like 50 H7/s6, 30 H7/d9 etc. 3.2 Geometrical Tolerances: Types of geometrical tolerances, terminology for deviation, representation of geometrical tolerance on drawing. 3.3 General welding symbols, length and size of weld, surface contour and finish of weld, all round and site weld, symbolic representation in Engineering practices and its interpretation. 3.4 Machining symbol and surface texture: Indication of machining symbol showing direction of lay, sampling length, roughness grades, machining allowances, manufacturing methods. Representation of surface roughness on drawing. Lecture Using Chalk-Board Model Demonstration Video Demonstrations
Unit IV
Details to assembly 4.1 Introduction to assembly drawing, accepted norms to be observed for assembly drawings, sequence for preparing assembly drawing, Bill of Material (BOM). 4.2 Couplings: Oldham & Universal couplings. 4.3 Bearing: Foot Step & Pedestal Bearing. 4.4 Lathe: Single (pillar type) and square tool Post. 4.5 Bench vice & Pipe Vice. 4.6 Screw-jack 4.7 Drill Jig Lecture Using Chalk-Board Model Demonstration Video Demonstrations
Unit V
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Suggested Micro Project / Assignment
Micro project
- Prepare assembly drawing/detailed drawing of machine vice/ lathe tailstock/ tool post etc. by visiting Institute’s workshop.
- Prepare report on various types of welding symbols used for fabrication work by Visiting nearby fabrication workshop.
- Any other micro-projects suggested by subject faculty on similar line.
- Prepare detailed drawings of Various IC Engine components using proper measuring instruments by visiting Institute’s Power engineering Lab or any other.
- Students should collect Production drawings from nearby workshops/industries and establish item reference numbers on that drawing for convention or tolerance value. Prepare report showing item reference numbers and their meaning.
- Prepare report representing conventional representation of various piping joints by visiting nearby process industries like sugar factory, chemical industries, water treatment plant, etc.
Laboratory Equipment
- Models, charts of objects for Auxiliary view. 1
- Models/ Charts of Conventional representation and Production drawing. 3,4,5
- Models, charts of assembly and details drawings. 6,7,8,9,10,11,12,13,14,15
- Drawing equipment and instruments for classroom teaching-large size: a. T-square or drafter (Drafting Machine). b. Set square (45-45-90 and 30-60-90) c. Protector. d. Drawing instrument box (containing set of compasses and dividers). Drawing sheets, drawing pencils H,2H, Eraser, Drawing pins / clips All
- Drawing Table with Drawing Board of Full Imperial/ A1 size. All
- Set of various industrial drawings being used by industries. All
Learning Materials / Books
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Learning Websites & Portals
- https://youtu.be/599ThWCvMVA Auxiliary View
- https://youtu.be/k7-POcJfjAU Auxiliary View
- https://youtu.be/5Pj7vkcolXk Introduction to working drawing.
- https://youtu.be/VRi2LMm6jHU Assembly
- https://youtu.be/FqzplEaE4Z0 Details to Assembly
For detail Syllabus of all other subjects of Mechanical Engineering, K scheme do visit Mechanical Engineering 3rd Sem Syllabus for K scheme.
For all Mechanical Engineering results, visit MSBTE Mechanical Engineering all semester results direct links.