JNTUH M.Tech 2017-2018 (R17) Detailed Syllabus Embedded Systems Laboratory

Embedded Systems Laboratory Detailed Syllabus for Embedded Systems & VLSI Design/VLSI and Embedded Systems/ Electronics Design Technology M.Tech first year second sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.

The detailed syllabus for Embedded Systems Laboratory M.Tech 2017-2018 (R17) first year second sem is as follows.

M.Tech. I Year II Sem.

Note: Minimum of 10 Experiments have to be conducted
Part-I

• Write a program

1. Write a simple program to print “hello world”
2. Write a simple program to show a delay.
3. Write a program for counting the number of times that a switch is pressed & released.
4. Write a c program to test loop time outs.
5. Write a c program to test hardware based timeout loops.
6. Illustrate the use of port header file (port M) using an interface consisting of a keypad and liquid crystal display.

• Write a program to create a portable hardware delay.
• Write a loop application to copy values from P1 to P2
• Develop a simple EOS showing traffic light sequencing.
• Write a program to drive SEOS using Timer 0.

Part-II
The following programs are to be implemented on ARM Processor

1. Simple assembly program for addition, Subtraction, Multiplication, Division, Operating Modes, System Calls and Interrupts, Loops, Branches.
2. Write an Assembly program to configure and control general purpose input/output (GPIO) port pins
3. To read digital values from external peripherals and execute them with the target board
4. Program for reading and writing of a file
5. To demonstrate time delay program using built in timer / counter feature on IDE environment
6. To demonstrate a simple interrupt handler and setting up a timer
7. Program to demonstrate simple interrupt handlers. Press button to generate an interrupt and trace the program flow with debug terminal
8. Program to interface 8 Bit LED and Switch Interface
9. Program to implement Buzzer Interface on IDE environment

For all other M.Tech 1st Year 2nd Sem syllabus go to JNTUH M.Tech Embedded Systems & VLSI Design/VLSI and Embedded Systems/ Electronics Design Technology 1st Year 2nd Sem Course Structure for (R17) Batch.

All details and yearly new syllabus will be updated here time to time. Subscribe, like us on facebook and follow us on google plus for all updates.

Do share with friends and in case of questions please feel free drop a comment.