JNTUH B.Tech 2nd Year 1 sem Mechanical Engineering Production (2-1) Metallurgy and Mechanics of Solids Lab Engineering R13.

JNTUH B.Tech 2nd year Metallurgy and Mechanics of Solids Lab gives you detail information of Metallurgy and Mechanics of Solids Lab Engineering R13 year subject. It will be help full you to understand you complete curriculum of the year.

(A) METALLURGY LAB

1. Preparation and study of the Micro Structure of pure metals like Iron, Cu and Al.
2. Preparation and study of the Micro structure of Mild steels, low carbon steels, high – C steels.
3. Study of the Micro Structures of Cast Irons.
4. Study of the Micro Structures of Non-Ferrous alloys.
5. Study of the Micro structures of Heat treated steels.
6. Hardeneability of steels by Jominy End Quench Test.
7. To find out the hardness of various treated and untreated steels.

(B) MECHNICS OF SOLIDS LAB

1. Direct tension test
2. Bending test on
   a) Simple supported
   b) Cantilever beam
3. Torsion test
4. Hardness test
   a) Brinells hardness test
   b) Rockwell hardness test
5. Test on springs
6. Compression test on cube
7. Impact test
8. Punch shear test

Download iStudy Android App for complete JNTUH syllabus, results, timetables and all other updates. There are no ads and no pdfs and will make your life way easier.

NOTE : Any 10 experiments from the above are to be conducted taking atleast 4 from each section.

For more information about all JNTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.