{"id":10922,"date":"2020-02-21T16:33:39","date_gmt":"2020-02-21T16:33:39","guid":{"rendered":"https:\/\/www.inspirenignite.com\/vtu\/15my45p-metrology-and-measurement-lab-mechanical-mtt-4th-sem-syllabus-for-diploma-dte-karnataka-c15-scheme\/"},"modified":"2020-02-21T16:33:39","modified_gmt":"2020-02-21T16:33:39","slug":"15my45p-metrology-and-measurement-lab-mechanical-mtt-4th-sem-syllabus-for-diploma-dte-karnataka-c15-scheme","status":"publish","type":"post","link":"https:\/\/www.inspirenignite.com\/vtu\/15my45p-metrology-and-measurement-lab-mechanical-mtt-4th-sem-syllabus-for-diploma-dte-karnataka-c15-scheme\/","title":{"rendered":"15MY45P: Metrology and Measurement Lab Mechanical MTT 4th Sem Syllabus for Diploma DTE Karnataka C15 Scheme"},"content":{"rendered":"

Metrology and Measurement Lab detail DTE Kar Diploma syllabus for Mechanical Engineering (Machine Tool Technology) (MY), C15 scheme is extracted from DTE Karnataka<\/a> official website and presented for diploma students. The course code (15MY45P), and for exam duration, Teaching Hr\/week, Practical Hr\/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.<\/p>\n

For all other mechanical mtt 4th sem syllabus for diploma c15 scheme dte karnataka you can visit Mechanical MTT 4th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects<\/a>. The detail syllabus for metrology and measurement lab is as follows.<\/p>\n

Pre-requisites:<\/h4>\n

Basic science, Applied Mathematics and basics of metrology\n<\/p>\n

Course Objectives:<\/h4>\n
    \n
  1. Understand the working principle of metrology and measuring equipments.<\/li>\n
  2. Evaluate and analyze the components by using standard measuring equipments<\/li>\n<\/ol>\n

    Course Outcomes:<\/h4>\n

    For complete syllabus and results, class timetable and more pls download iStudy Syllabus App<\/a>.<\/b> Its a light weight, easy to use, no images, no pdfs platform to make students life easier.<\/p>\n

    Part A<\/h4>\n
      \n
    1. Introduction to metrology and measuring equipments\t\t03\tCO1<\/li>\n
    2. <\/li>\n
        \n
      1. Determine the dimensions of given component by using Vernier caliper.<\/li>\n
      2. Determine the dimensions of given component by using Micrometer.\t\t06<\/li>\n<\/ol>\n
      3. Determine the dimensions of given component by using Vernier height gauge\t\t03<\/li>\n
      4. <\/li>\n
          \n
        1. Determine the depth of given component by using Vernier depth gauge<\/li>\n
        2. Determine the depth of given component by using Depth micrometer\t\t03\tCO2<\/li>\n<\/ol>\n
        3. <\/li>\n
            \n
          1. Use of slip gauges, their accuracy and wringing of slip gauges to given dimensions<\/li>\n
          2. Calibration of Vernier caliper and micrometer\t\t06<\/li>\n<\/ol>\n
          3. Determine the internal dimensions of given components by using<\/li>\n
              \n
            1. Inside micrometer<\/li>\n
            2. Telescopic gauge<\/li>\n
            3. Bore gauge\t\t06<\/li>\n<\/ol>\n
            4. Determine roundness of the given component by using dial gauge, magnetic stand and V block\t\t03<\/li>\n
            5. <\/li>\n
                \n
              1. Determine the angle of the given component by using sine bar.<\/li>\n
              2. Determine the angle of the given component by sine center\t\t06\tCO3<\/li>\n<\/ol>\n
              3. <\/li>\n
                  \n
                1. Determine center, squareness and angle of the component by using combination set<\/li>\n
                2. Determine the angle of component by using universal bevel protractor.\t\t06<\/li>\n<\/ol>\n<\/ol>\n

                  Part B<\/h4>\n
                    \n
                  1. <\/li>\n
                      \n
                    1. Determine the effective diameter of screw thread by using Two wire method<\/li>\n
                    2. Determine the effective diameter of screw thread by using Three wire method\t\t09\tCO4<\/li>\n<\/ol>\n
                    3. Determine the gear terminologies of the given spur gear by using venier gear tooth calliper.\t\t03<\/li>\n
                    4. <\/li>\n
                        \n
                      1. Determine the profile of external threads, tools, templates and gauges by means of Profile projector.<\/li>\n
                      2. Determine the profile of external threads, tools, templates and gauges by means of Tool makers microscope<\/li>\n<\/ol>\n
                      3. <\/li>\n
                          \n
                        1. Determine the alignment test on lathe using magnetic stand, dial indicator and sprit level<\/li>\n
                        2. Check the true running of head stock spindle on lathe\t06\tCO5<\/li>\n<\/ol>\n
                        3. Demonstration and checking the component for tolerance limits by using Plain plug gauge, Progressive gauge, Ring gauge, Snap gauge and Thread gauge\t06<\/li>\n
                        4. Determine dimensions of component by using coordinate measuring machine\t06\tCO6<\/li>\n<\/ol>\n

                          Scheme of Valuation for End Examination<\/h4>\n

                          For complete syllabus and results, class timetable and more pls download iStudy Syllabus App<\/a>.<\/b> Its a light weight, easy to use, no images, no pdfs platform to make students life easier.<\/p>\n

                          Equipment List:<\/h4>\n
                            \n
                          1. Venier calliper<\/li>\n
                          2. Micrometer<\/li>\n
                          3. Vernier height gauge<\/li>\n
                          4. Depth micrometer<\/li>\n
                          5. Vernier depth gauge<\/li>\n
                          6. Slip gauges<\/li>\n
                          7. Universal bevel protractor<\/li>\n
                          8. Dial gauge, magnetic stand and V block<\/li>\n
                          9. Sine bar-100mm,200mm<\/li>\n
                          10. Sine center-100mm,200mm<\/li>\n
                          11. Combination set<\/li>\n
                          12. Inside micrometer<\/li>\n
                          13. Telescopic gauges set<\/li>\n
                          14. Bore gauge set<\/li>\n
                          15. Screw thread measurement by using Two wire set<\/li>\n
                          16. Screw thread measurement by using Three wire set<\/li>\n
                          17. Venier gear tooth caliper<\/li>\n
                          18. Profile projector<\/li>\n
                          19. Tool makers microscope<\/li>\n
                          20. Coordinate measuring machine<\/li>\n
                          21. Progressive gauge,<\/li>\n
                          22. Ring gauge,<\/li>\n
                          23. Snap gauge<\/li>\n
                          24. Thread gauge<\/li>\n<\/ol>\n

                            Model Question Paper:<\/h4>\n

                            PART-A<\/b><\/p>\n

                              \n
                            1. Determine roundness of the given component by using dial gauge, magnetic stand and V block<\/li>\n<\/ol>\n

                              PART -B<\/b><\/p>\n

                                \n
                              1. Determine the gear terminologies of the given spur gear by using venier gear tooth caliper.<\/li>\n<\/ol>\n

                                For detail syllabus of all other subjects of BE Mechanical Mtt, C15 scheme do visit Mechanical Mtt 4th Sem syllabus for C15 scheme<\/a>.<\/p>\n

                                Dont forget to download iStudy Syllabus App<\/a> for latest syllabus and results, class timetable and more.<\/p>\n","protected":false},"excerpt":{"rendered":"

                                Metrology and Measurement Lab detail DTE Kar Diploma syllabus for Mechanical Engineering (Machine Tool Technology) (MY), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. […]<\/p>\n","protected":false},"author":2298,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":""},"categories":[5,73],"tags":[],"class_list":["post-10922","post","type-post","status-publish","format-standard","hentry","category-4th-sem","category-machine-tool-tech-diploma"],"_links":{"self":[{"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/posts\/10922","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/users\/2298"}],"replies":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/comments?post=10922"}],"version-history":[{"count":0,"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/posts\/10922\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/media?parent=10922"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/categories?post=10922"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/vtu\/wp-json\/wp\/v2\/tags?post=10922"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}