Process Control and VIrtual Instrumentation Lab EIE 7th Sem Syllabus for VTU BE 2017 Scheme

Process Control and VIrtual Instrumentation Lab detail syllabus for Electronics & Instrumentation Engineering (Eie), 2017 scheme is taken from VTU official website and presented for VTU students. The course code (17EIL76), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below.

For all other eie 7th sem syllabus for be 2017 scheme vtu you can visit EIE 7th Sem syllabus for BE 2017 Scheme VTU Subjects. The detail syllabus for process control and virtual instrumentation lab is as follows.

List of Experiments:

1. Rig up and test the circuit to display the temperature using RTD/Thermistor with suitable signal conditioning circuit.
2. Rig up and test the circuit to display the temperature using IC AD590 / LM35 with suitable signal conditioning circuit.
3. Rig up and test the circuit to display the load/ strain using load cell/ strain gauge with suitable signal conditioning circuits.
4. Realize Op-amp based Proportional (P), Derivative (D) and Integral (I) analog controller modes.
5. Realize Op-amp based PI and PD composite analog controller modes.
6. Conduct an experiment to perform and analyze PC based temperature/pressure controller. Plot the optimum response of different controller modes for different set-points.
7. Conduct an experiment to perform and analyze PC based level/flow controller. Plot the optimum response of different controller modes for different set-points.
8. Realization of basic gate functions using PLC. The logic should be solved using ladder diagram.
1. AND (ii)OR (iii)NAND
2. XOR(v)NOR (vi)Latch and Unlatch of output
9. Study and demonstration of working of different types of Timers and Counters of PLC. The logic should be solved using ladder diagram.
10. Study and demonstration of Bottle Filling Process using PLC. The logic should be solved using ladder diagram.
11. Study and demonstration of Lift/Elevator System using PLC. The logic should be solved using ladder diagram.
12. Conduct an experiment to plot the characteristics of different types process control valves.
13. Basic operations, simple programming structure using LabVIEW.
1. Basic arithmetic operations
2. Boolean operations
3. Sum of n numbers using for loop
4. Sorting even numbers using while loop in an array
14. Creation of a CRO using LabVIEW and measurement of frequency and amplitude.
15. Data acquisition using LabVIEW for temperature measurement with thermocouple and AD590.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Conduct of Practical Examinations:

• All laboratory practicals are to be included for practical examination.
• Students are allowed to pick one experiment from the lot.
• Strictly follow the instructions as printed on the cover page of answer script for breakup of marks.
• Change of experiment is allowed only once and 17% Marks allotted to the procedure part to be made zero.

For detail syllabus of all other subjects of BE Eie, 2017 scheme do visit Eie 7th Sem syllabus for 2017 scheme.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.