Measurements and Metrology Lab Syllabus for VTU BE/B.Tech Aeronautical Engineering third sem complete syllabus covered here. This will help you understand complete curriculum along with details such as exam marks and duration. The details are as follows.
| Subject Code | 15AEL37A | IA Marks | 20 |
|---|---|---|---|
| Number of Lecture Hours/Week | 03 | Exam Marks | 80 |
| Total Number of Lecture Hours | 42 | Exam Hours | 3 |
CREDITS – 04
Course objectives: This course will enable students to
- Learn the concepts of mechanical measurements and metrology
- Use the concept of accuracy, error and calibration
- Use the basic metrological instruments
| Modules | Revised Bloom’s
Taxonomy (RBT) Level |
|---|---|
| 1. Calibration of Pressure Gauge | L1, L2, L3, L4 |
| 2. Calibration of Thermocouple | L1, L2, L3, L4 |
| 3. Calibration of LVDT | L1, L2, L3, L4 |
| 4. Calibration of Load cell | L1, L2, L3, L4 |
| L1, L2, L3, L4, L5 | |
| 6. Comparison and measurements using vernier caliper and micrometer | L1, L2, L3, L4 |
| 7. Measurement of vibration parameters using vibration setup. | L1, L2, L3, L4 |
| 8. Measurements using Optical Projector / Toolmaker Microscope. | L1, L2, L3 |
| 9. Measurement of angle using Sine Center / Sine bar / bevel protractor | L1, L2, L3 |
| 10. Measurement of alignment using Autocollimator / Roller set | L1, L2, L3 |
| 11. Measurement of Screw thread Parameters using Two-wire or Three-wire method. | L1, L2, L3 |
| 12. Measurements of Surface roughness, Using Tally Surf/Mechanical Comparator | L1, L2, L3 |
| 13. Measurement of gear tooth profile using gear tooth vernier /Gear tooth micrometer | L1, L2, L3 |
| 14. Calibration of Micrometer using slip gauges | L1, L2, L3 |
Revised Bloom’s Taxonomy Levels: L1 – Remembering, L2 – Understanding, L3 – Applying, L4 – Analysing, L5 – Evaluating, and L6 – Creating
- Course outcomes: After studying this course, students will be able to:
- Identify and classify different measuring tools related to experiments.
- Identify, define, and explain accuracy, precision, and some additional terminology.
- Conduct, Analyze, interpret, and present measurement data from measurements experiments.
Conduct of Practical Examination:
- All laboratory experiments are to be included for practical examination.
- Students are allowed to pick one experiment from the lot.
- Strictly follow the instructions as printed on the cover page of answer script for breakup of marks.
- Change of experiment is allowed only once and 15% Marks allotted to the procedure part to be made zero.
Graduate Attributes (as per NBA):
- Engineering Knowledge.
- Problem Analysis.
- Design / development of solutions
- Interpretation of data.
For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Aeronautical Engineering Group.
For more information about all VTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.