The candidates should have to download the hallticket from 11-07-2019 onwards.

The Post Graduate Common Entrance Test – 2019 Time Table – Revised Dates

Official Website

For more information about eligibility of courses log on to website: PGCET 2019 Rescheduled

For all PGCET 2019 syllabus refer to K PGCET Syllabus. And for PGCET 2018 cutoffs refer to All Karnataka PGCET 2018 cutoffs.

All UG and PG notification, PGCET cut offs will be updated on InI. Therefore, to get all updates keep following InI.

Candidates who has get valid score in Gate are given first preference for admission in various courses M.E / M.Tech / M.Arch.

Candidates with valid Gate  score need not to appear for PGCET 2019.

Therefore the candidates who qualified in Gate they have to take admission through online.

If there is no candidates are available who qualified  Gate the Seat allotment will be made to non Gate candidates based on the merit of PGCET 2019.

The candidates make sure that they have valid qualifying marks in Gate in respective subjects under the category which they belong (GM/OBC/SC/ST/PD)

Those who not have qualifying marks they have to appear for PGCET 2019 examination.

Category (GM/OBC/SC/ST/PD) is applicable to person of Karnataka origin only.

VTU, UBDT and UVCE are offering more than 100 programs in M.E /M.Tech in different disciplines with 04 M.Arch programs and 1 MBA Infrastructure Management.

Candidates who are qualified in the final examination with B.E / B.Tech / B.Arch Degree or its equivalent from the recognised university are eligible to apply M.E / M.Tech /M.Arch courses.

Non Gate candidate seeking admission to any of these courses, as per the schedule they should appear PGCET 2019 test under appropriate board corresponding to their basic qualifying or qualified degree, irrespective of M.E / M.Tech / M.Arch courses for which the candidate is eligible.

B.Sc degree candidates from recognised university with Mathematics as one of the subjects or B.E / B.Tech / B.Sc engineering are eligible for M.Tech programme offered by Department of Post Graduate Studies and Research in Mathematics and Computer Science of Kuvempu University.

B.E / B.Tech and M.Sc degree candidates with conditions specified under detailed eligibility criteria from recognised Universities are eligible for Department of Studies in Computer Science, University of Mysore, Mysore.

As per the schedule a non-Gate candidate seeking admission to the M.Tech program should appear for PGCET 2019.

Therefore the sponsored candidates should claim seat under sponsored quota, they are not entitled for claim seat under any other quota.

M.Tech part time program shall be conducted only if number of candidates admitted is eight or more.

Sponsored Candidates:

A candidate having full time employee for a minimum period of three years either continuously or in broken periods.

Experience in the relevant field from registered firm / company / industry / educational institution / research institution / Government Department / Autonomous department or autonomous organisation is considered, after the qualifying examination till the date of notification.

However candidate has to submit an undertaking letter saying that the candidate is the full time employee from the employer. Candidate will not be withdrawn from the course till the completion of the course.

Part time / Trainee / Guest faculty will not be considered as a sponsored candidate.

Official website:

For more information about eligibility of courses log on to website: Gate 2019 Eligibility for M.Tech

For all PGCET 2019 syllabus refer to K PGCET Syllabus. And for PGCET 2018 cutoffs refer to All Karnataka PGCET 2018 cutoffs.

All UG and PG notification, PGCET cut offs will be updated on InI. Therefore, to get all updates keep following InI.

1. Eligibility For Full Time M.E / M.Tech / M.Arch Course

Candidate who are qualified in the Gate Exam are eligibile for M.E / M.Tech / M.Arch course.

Candidate who are qualified in the equivalent examination as prescribed by the Competent Authority.

The Candidate who has obtained minimum aggregate of 50% marks in the all the subjects in all the years / Semesters of there Degree Examination is Eligible for admission to M.E / M.Tech / M.Arch course.

Eligibility for SC, ST  Category – 1 the minimum aggregate of 45% marks in equivalent examination of Karnataka candidates.

Only for local Karnataka candidates the Reservation is applicable.

2. Eligibility For Part Time M.E / M.Tech / M.Arch Course

Candidate who willing to do Part Time M.E / M.Tech / M.Arch course.They must qualified in the equivalent examination as prescribed by the Competent Authority.

After completion of equivalent examination the candidate should have worked in Organisation not less than 3 years as on 31^st July 2019, in an establishment.

Candidate who are working in organisation the distance between in the Institute to Organisation is 40 km.Where as the candidate seeks the admission.

The Employer has to fill up the NOC duly signed by the competent authority.

Candidate who has obtained minimum aggregate of 50% marks in the all the subjects in all the years / Semesters of there Degree Examination is Eligible for admission to M.E / M.Tech / M.Arch course.

Eligibility for SC, ST  Category – 1 the minimum aggregate of 45% marks in equivalent examination of Karnataka candidates.

Only for local Karnataka candidates the Reservation is applicable.

Reservation Criteria for M.E / M.Tech / M.Arch Course

PGCET 2019 the candidates who has passed the Final Examination of Bachelor Degree with the aggregate percentage of mark.

The candidates who is appearing the Q.E. and expecting the results is eligible for Post Graduate Common Entrance Test.

Therefore Candidates who are fail in the subjects in the final examination of bachelor degree the qualifying examination.

The candidates who do not possess the academic eligibility will not be eligible for the seat of respective courses.

Therefore the candidates of SC / ST / Category – 1 / OBC criteria for eligibility is to applicable to the person of Karnataka origin for claiming of Government seats.

Under clauses (a), (b), (c), (d) and (h) item – 6  chapter – 1.

The non Karnataka candidates who are applying for the Government seats are not the same process.

Official Website

For more information about eligibility of courses log on to website: KPGCET Eligibility for M.E / M.Tech 2019

For all PGCET 2019 syllabus refer to K PGCET Syllabus. And for PGCET 2018 cutoffs refer to All Karnataka PGCET 2018 cutoffs.

All UG and PG notification, PGCET cut offs will be updated on InI. Therefore, to get all updates keep following InI.

Eligibility For MCA, No Part Time courses are offered for MCA

Minimum of 3 years of Bachelor Degree from Recognised University.

The candidate who has completed there under Graduate examination with the one of the optional subjects.

•  Mathematics.
• Statistic.
• Computer Science or Application or Programming.
• Business Statistic or Mathematics.

The above subjects the candidates should choice or optional subject in the Under Graduate Examination or Equivalent Examination.

The Candidates who has obtained minimum aggregate of 50% marks in the all the subjects in all the years of the Under Graduate Examination conducted by the Recognised University.

If the candidates who obtained minimum aggregate of 50% marks in under Graduate Examination is Eligible for admission to MCA course.

Therefore the Eligibility for SC, ST  Category – 1 the minimum aggregate of 45% marks in equivalent examination of Karnataka candidates.

The One of the subject specified above the candidate who has studied and passed in the examination with the Pre – University course.

 The candidates aggregate 50% marks in that subject is eligible for Admission in the MCA course.

Eligibility for SC, ST  Category – 1 the minimum aggregate of 45% marks in equivalent examination of Karnataka candidates.

Lateral Entry to 2^nd Year MCA

Candidates who has passed the Bachelor Degree examination from recognised university with the minimum of 3 years of the duration examination in BCA, B.Sc, (I.T / Computer Science).

Mathematics at 10 + 2 level or at Graduate level and obtained aggregate minimum of 50% marks in all the subjects in all the years of the Degree Final Examination.

Therefore the candidates can be eligible for admission in the MCA course.

Eligibility for SC, ST  Category – 1 the minimum aggregate of 45% marks in equivalent examination of Karnataka candidates.

Only for local Karnataka candidates the Reservation is applicable.

Reservation Criteria For MCA Courses

PGCET 2019 the candidates who has passed the Final Examination of Bachelor Degree with the aggregate percentage of mark.

The candidates who is appearing the Q.E. and expecting the results is eligible for Post Graduate Common Entrance Test.

The candidates who are not qualify in the subjects in the final examination of bachelor degree the qualifying examination.

But the candidates who do not possess the academic eligibility will not be eligible for the seat of respective courses.

Therefore the candidates of SC / ST / Category – 1 / OBC criteria for eligibility is to applicable to the person of Karnataka origin for claiming of Government seats.

Under clauses (a), (b), (c), (d) and (h) item – 6  chapter – 1.

The non Karnataka candidates who are applying for the Government seats are not the same process.

Official Website

For more information about eligibility of courses log on to website: KPGCET Eligibility for MCA 2019

For all PGCET 2019 syllabus refer to K PGCET Syllabus. And for PGCET 2018 cutoffs refer to All Karnataka PGCET 2018 cutoffs.

All UG and PG notification, PGCET cut offs will be updated on InI. Therefore, to get all updates keep following InI.

Wish you all a great luck.

1. Eligibility For Full Time MBA Courses

• Minimum of 3 years of Bachelor Degree from Recognised University.
• Minimum aggregate of 50% marks in the equivalent examination conducted by the Recognised University.
• Including the Languages in the 3 years of Degree Final Examination is Eligible for admission to MBA course.

Eligibility for SC, ST  Category – 1 the minimum aggregate of 45% marks in equivalent examination of Karnataka candidates.

Only for local Karnataka candidates the Reservation is applicable.

2. Eligibility For Part Time MBA Courses

Candidates who willing to do Part Time MBA course.They must complete there Bachelor Degree from Recognised University.

After completion of Bachelor Degree the candidate should have worked in Organisation not less than 3 years as on 31^st July 2019, in an establishment.

The person who are working in organisation the distance between in the Institute to Organisation is 40 km.Where as the candidate seeks the admission.

Candidates who has passed Bachelor Degree minimum of 3 years  from Recognised University.

Therefore the Candidates who has obtained minimum aggregate of 50% marks in the equivalent examination conducted by the Recognised University.

All the subjects including the Languages in the 3 years of Degree Final Examination is Eligible for admission to MBA course.

Eligibility for SC, ST  Category – 1 the minimum aggregate of 45% marks in equivalent examination of Karnataka candidates.

Only for local Karnataka candidates the Reservation is applicable.

3. Reservation Criteria For MBA Courses

PGCET 2019 the candidates who has passed the Final Examination of Bachelor Degree with the aggregate percentage of mark.

The candidates who is appearing the Q.E. and expecting the results is eligible for Post Graduate Common Entrance Test.

Candidates who are fail in the subjects in the final examination of bachelor degree the qualifying examination.

The candidates who do not possess the academic eligibility will not be eligible for the seat of respective courses.

Therefore the candidates of SC / ST / Category – 1 / OBC criteria for eligibility is to applicable to the person of Karnataka origin for claiming of Government seats.

Under clauses (a), (b), (c), (d) and (h) item – 6  chapter – 1.

The non Karnataka candidates who are applying for the Government seats are not the same process.

Official Website

For more information about eligibility of courses log on to website: KPGECET Eligibility 2019

For all PGCET 2019 syllabus refer to K PGCET Syllabus. And for PGCET 2018 cutoffs refer to All Karnataka PGCET 2018 cutoffs

All UG and PG notification, PGCET cut offs will be updated on InI. Therefore, to get all updates keep following InI.

The Syllabus for KEA PGCET Mathematics and Computer Science is as follows

Mathematics : 

Analytical Geometry of 2-d — Lines, Curves, Analytical Geometry of 3-d — Lines, Planes and Conics, Differential Calculus — Derivatives of any order, Derivatives of functions, curves, Polar coordinates, Partial differentiation, Integral Calculus — Integrals of standard functions, Reduction formulae, Applications, Differential equations — Up to second order homogeneous equations, Solutions using Laplace transforms Probability — Events, Sample space, Basic Theorems, conditional probability, Independence, Statistics — Frequency tables, Histograms, Measures of averages and dispersion, Combinatorial analysis — Permutations & Combinations, Linear and Non-Linear equations — Solution, Application, Set theory — Basic concepts, Operations on sets, Venn diagrams, De Morgan’s law, Power sets ,Relations — Composite, Equivalence, Recurrence, Number system — Binary, Ternary and others, Logic — Operators, Truth tables, Tautologies, Algebraic structures- Groups, Rings, Sequences and Series- Convergence Fundamentals of Computers, Office Automation, Basics of Internet

‘C’ Computer Language

Basic Data types, Fundamentals of C programming, Control structures, Bit wise operators, Storage classes, Functions, Arrays, Pointers.

Exam consist of two type of Question carrying 1 and 2 marks each. There are 50 one mark questions and 25 questions weighing 2 marks each. The question paper is for 100 marks.

All details and cutoffs for previous years are provided at Inspire n Ignite (InI). For all updates and please like us on Facebook and follow us on google plus.

Do share this with friends and in case of questions please feel free to drop the question in comments.

The Syllabus for KEA PGCET Polymer Science and Technology is as follows

1. Fluid mechanics and statics: Types of fluids – shear stress and velocity gradient relation, Newtonian and non-Newtonian fluids, laminar and turbulent ¹ow . Flow in boundary layers. Reynolds number, Bernoulli equations, Variation of pressure with height – hydrostatic equilibrium, Barometric equation, Measurement of fluid pressure — monometers

2. Chemical process calculations : Concept of mole, Mole fraction, Compositions of mixtures of solids, liquids and gases. Ideal gas law calculations, general material balance equation for steady state.

3. Chemical engineering thermodynamics: Basic concepts – System, Surrounding and processes, Closed and Open systems, State and Properties, Intensive and Extensive Properties, State and Path functions, General statement of first law of thermodynamics, First law for cyclic process, P-V-T behavior of pure fluids, equations of state and ideal gas law, Processes involving ideal gas law; Constant volume, constant pressure, constant temperature,. Van-der Waals equation,

4. Heat and mass transfer Modes of heat transfer, unilayer and multiplayer condition, forced and natural convection, Introduction to molecular diffusion. in gases and liquids, theories of mass transfer, principles and types of distillations

5. Polymer science: Classification of polymers, Definition of polymerization„ Chain polymerization (free radical, ionic and co-ordination polymerizations), Step (condensation) polymerization, copolymerization Methods of Polymerization (bulk. solution, Suspension, Emulsion.)

6. Polymerization kinetics: Definition of reaction rate, order, molecularity, different theories of reaction rate, activation energy, kinetic expressions for simple 1rst order & second order chemical reactions, kinetics of linear step reaction polymerization, kinetics of addition polymerization initiated by free radical initiator: steady state assumption,

7. Processing Technology: Extrusion, Injection moulding, blow moulding Compression moulding. rotational moulding, thermoforming, Calendering.

8. Polymer manufacturing : Industrial production methods of HDPE, LDPE, PP, PS, PVC, PMMA, Nylon 6 and Nylon 66

Exam consist of two type of Question carrying 1 and 2 marks each. There are 50 one mark questions and 25 questions weighing 2 marks each. The question paper is for 100 marks.

All details and cutoffs for previous years are provided at Inspire n Ignite (InI). For all updates and please like us on Facebook and follow us on google plus.

Do share this with friends and in case of questions please feel free to drop the question in comments.

The Syllabus for KEA PGCET Architecture is as follows

CITY Planning: Historical development of city planning, principals pf city planning new towns, survey method, site planning and planning regulations and building bye laws.

Housing : Concept of shelter, housing design and policies, role of government agencies, 1nance and management. Landscape

Design: Principles of landscape design, landscape elements, materials, planning design

Visual and Urban design: Principles of visual composition, proportion, scale, rhythm, symmetry, asymmetry, harmony, balance of form and color sence of place and space, division of space, focal point vista, visual survey.

History of Architecture; Indian — Indus vally, Vedic, Buddhist, Indo Aryan, Dravidian and mughal periods; European — Egyptian, Greek, Rioman, Medieval, and renaissance periods.

Development of Contemporary Architecture: Development and impact on society since industrial revolution, influence of modern art on architecture, works national and international architects, post — modernism in architecture.

Planning Theory: Planning process, comprehensive planning, land use and density in residential and nonresidential area, central place theory, rank — size rule, settlement pattern, land utilization, and district level planning.

Techniques of planning: Application of remote sensing techniques in urban and regional planning surveys, methods of preparation of urban and regional development plans, structure plans, strategy plans etc and site planning principles and design.

Note: The questions may be of multiple choices, objectives type pertaining to the syllabus.

Exam consist of two type of Question carrying 1 and 2 marks each. There are 50 one mark questions and 25 questions weighing 2 marks each. The question paper is for 100 marks.

All details and cutoffs for previous years are provided at Inspire n Ignite (InI). For all updates and please like us on Facebook and follow us on google plus.

Do share this with friends and in case of questions please feel free to drop the question in comments.

The Syllabus for KEA PGCET Mechanical Science is as follows

1. Engineering Mathematics: Linear Algebra: Matrices, System of Linear Equations Eigen values and Eigen vectors; Calculus: Taylor’s Series, Partial Derivatives, Iota Derivatives, Definite Integrals; Differential Equations: Linear Ordinary Differential Equations, Fiist Order Non Lineal Ordinary Differential Equations, Initial and Boundar: Value Problems, Laplace Transformation, Partial Differential Equations; Numerica Methods: System of Linear Equations, Jacobi, Gauss Siedel and Clout’s methods, Rung( Kutta and Newton – Raphson methods; Probability and Statistics: Gaussian and Weibu distribution and prop erties, Method of Least Squares, Regression Analysis, Analysis oi Variance.

2. Engineering Materials: Structure and properties of engineering materials, Heal treatment, composite materials and their applications.

3. Engineering Mechanics: Free body concepts, Equations of Equilibrium, Centroids and Moment of inertia.

4. Strength Of Materials: Stress and Strains, Elastic Constants, Principal Stresses, Maximum Shear Stress Shear Force and Bending Moment diagrams, Stresses in Beams, Deflection of Beams, Torsion, Columns and Struts.

5. Fluid Mechanics: Fluid properties, fluid statics, Manometry, Buoyancy, Conservation laws, Euler’s equation, Bernoulli’s equation, Viscous flow of incompressible fluids, Laminar and Turbulent flows, Flow through pipes, Dimensional analysis.

6. Thermodynamics: Laws of thermodynamics, internal energy, enthalpy and entropy, Thermodynamic processes, Heat and work, Irreversibility and availability, perfect gas, properties of pure substances. Air standard and fuel air cycles. IC engines and Gas turbines, centrifugal and axial ¹ow compressors, Basic concepts of Jet propulsion.

7. Theory Of Machines : Analysis of planar mechanisms, Dynamic analysis of Slider-Crank mechanism Cams and followers. Kinematics of Gears, Governors and wheels, Balancing of reciprocating and rotating masses. Free and Forced vibrations of single degree freedom systems. Effect of damping, Transmissibility, Vibration Isolation, Critical speed of shafts.

8. Design Of Machine Elements: Material and manufacturing considerations, Design of Shafts, keys, couplings, bolted, riveted and welded joints. Dynamic loads, Design of power sciews, helical springs, Spur gears, clutches and brakes, Hydrodynamic lubrication, Journal bearings and anti friction bearings.

9. Production Engineering : Metal casting processes, Melting and Pouring of cast iron, Ferrous and nonferrous metals and alloys, casting defects, Inspection of castings Hot and Cold working of metals. Metal joining processes. Soldering brazing and welding, modern welding processes; Metal cutting tools – machine tool operations. Non-traditional machining processes.

10. Industrial Engineering And Management: Introduction to work study and method study. Principles of organization, types of organization types of ownership, functions of personnel management, functions of sales management. Materials management inventory control, value analysis scheduling & production control, PERT and CPM

Exam consist of two type of Question carrying 1 and 2 marks each. There are 50 one mark questions and 25 questions weighing 2 marks each. The question paper is for 100 marks.

All details and cutoffs for previous years are provided at Inspire n Ignite (InI). For all updates and please like us on Facebook and follow us on google plus.

Do share this with friends and in case of questions please feel free to drop the question in comments.

The Syllabus for KEA PGCET Electrical Sciences is as follows

Engineering Mathematics

Linear Algebra: Matrices and Determinants, Systems of linear equations, Eigen values and Eigen Vectors

Calculus: Limit, Continuity and Differentiability; Partial Derivatives; Maxima and Minima ; Sequences and Series; Test for conveigence; Fourier series.

Vector Calculus: Gradient; Divergence and Curl; Line; Surface and Volume integrals; Stokes. Gauss and Green’s theorems.

Differential Equations: Linear and non-linear Úrst order ODEs; Higher order linear ODEs with constant coefficients, Cauchy’s and Euler’s equations; Laplace transforms; PDEs — Laplace. heat and wave equations.

Probability and Statistics : Mean, median, mode and standard deviation; Random variables; Poisson, normal and binomial distributions: Correlation and regression analysis.

Numerical Methods: Solutions of linear and non-linear algebraic equations; Integration of trapezoidal and Simpson ‘s rule: single and multi-step methods for differential equations.

2. Electric Circuits & Fields

Network Topology : Graph of Network, concept of tree. links, tie set schedule, cutset schedule

Circuit Concepts: Source transformation, circuit analysis using loop current and node voltage methods, star-delta conversion, dual networks and concept of controlled sources. Network theorems, Resonant circuits, locus diagrams, Coupled circuits, polyphase circuits. Laplace transformations and applications, Non sinusoidal waveforms, initial conditions.

Network Functions: Network functions of one and two port networks, driving point & transfer functions, concepts of poles and zeroes. Two-port Network: Y and Z Parameters and h —Parameters of two port networks. PR functions & Hurwitz Polynomial, Gauss’s theorem, electric Úeld intensity and plane charges, capacitance of parallel plates and coaxial cylinders. Ampere’s and Blot-Savart’s laws, inductance of long and short solenoids.

3. Analog & Digital Electronics:

Analog Electronics: Transistor biasing and bias stability, Class A, Class B & Class C Amplifiers, small signal h-parameter equivalent circuit of transistor. Expression for current gain, voltage gain, input impedance. RC coupled amplifiers, frequency response, half power frequencies, bandwidth, factors influencing the bandwidth RC Coupled emitter follower amplifiers, current gain, voltage gain. input & output impedance, applications FET-RC coupled Amplifiers

Power Amplifiers: Class A, Class B, push pull and Class C power amplifiers. max power output Driving power requirements.

Feed back amplifiers & oscillators: Concept of positive & negative feed back advantages of negative feedback. Voltage & current feed back, effect of the same on performance characteristics. Condition for oscillation, Weinbridge oscillator, expression for frequency of oscillation, Crystal oscillators, voltage regulator, operational amplifiers, comparator, ZCD, precision rectifier. I to V & V to I converters, instrumentation amplifiers, square wave, triangular wave & saw tooth wave generator.

Wave shaping circuits: Clipping, Clamping, integrator & differentiator circuits.

Digital Electronics: Digital signals, Boolean constants and variables, Basic logic operations, AND. OR, NOR gates and realization or truth tables, Boolean expressions, simplification.

Number Systems & codes: Decimal, binary, octal, hexadecimal, binary coded decimal; octal, hex numbers. Excess 3 and Gray codes, binary arithmetic. Karnaugh map method of obtaining logic expressions, maxterm, minterm realization of logic functions using basic gates & also using NAND & NOR gates. Half adder, Full Adder.

Flip- Flops: R-S Flip- Flop, Clocked R-S, D-FT, JK, Master Slave JK-FF, Edge triggered Ûip-Ûops Sequential Logic : Registers, Shill registers, asynchronous counters, synchronous counters sequential circuits. AID and D/A converters, Multiplexers, Demultiplexers.

Semiconductor memories : RAM, ROM, PROM, EPROM, and EEPROMS

Control Systems: Basic control system concepts, transfer function, Block Diagram reduction, signal Ûow graph, DC & AC servomotors & their TF; analogous systems F-V, F-I analogies, Time domain and frequency domain analysis.

Stability : Absolute and relative stability, RH criterion. Polar plots, phase cross over & gain cross over frequencies. Bode plots, phase plot and gain plot, determination of gain and phase margins Nyquist stability

criterion: Principle of mapping of Nyquist path, gain margin, phase margin. Nyquist stability criterion. Root locus.

State space technique, state variables state model of linear systems, solution of state equation, state transition matrix.

5. Microprocessors: 8085 architecture, Instruction set, Addressing modes, Timing Diagram

Programming : Main and subroutine programs. Conditional call and return, counter and delay subroutines

Interrupts : Vector interrupts, interrupts routines, Restart instructions.

Memory & 110 Interfacing : Memory map and I/O map methods & interfacing devices, 8255 (PPI), 8253(PIT), 8259(PIC). Architecture and Instructions of 8 bit micro controller.

Exam consist of two type of Question carrying 1 and 2 marks each. There are 50 one mark questions and 25 questions weighing 2 marks each. The question paper is for 100 marks.

All details and cutoffs for previous years are provided at Inspire n Ignite (InI). For all updates and please like us on Facebook and follow us on google plus.

Do share this with friends and in case of questions please feel free to drop the question in comments.