VTU has reschedule exam timetable for B.E & B. Planning Dec 2019/Jan 2020 for 2015 & 2017 scheme.

Due to overlapping of examinations few subjects of B.E & B.Planning is reschedule. Students can check B.E/B.Planning Dec 2019/ Jan 2020 exam timetable reschedule dates and timings of few papers .

For more updated information on VTU Result or changes in Timetable keep visiting our site.

Students get more information on VTU Cutoff that is helpful you in admission, and you can get all VTU B.E/B.Tech syllabus for all sem. More over you can follow odd sem Academic Calendar 2019-20.

VTU Reschedule Exam Timetable B.E 2015 Scheme Dec 2019/Jan 2020 follows

All other notification and new updates keep visiting InI All About JNTUK Subscribe, like us on facebook and don’t forget to download our app iStudy

Wish you Good Luck !!

VTU has released odd sem timetable for B.Tech, M.Tech, MBA, MCA Dec 2019 / Jan 2020 for 2010, 2014, 2015, 2017 & 2018 scheme.

Students can check B.E/B.Tech Dec 2019/ Jan 2020 exam timetable 2018 scheme for 1st, 2nd & 3rd sem in detail like course code, timing, date & day and for better preparation you will get to know gap in each exam.

Students get more information on VTU Cutoff that is helpful you in admission, and more over you can get all VTU B.E/B.Tech syllabus for all sem. More over you can follow odd sem Academic Calendar 2019-20.

VTU B.E / B.Tech 2017 Scheme Exam Timings 1st – 3rd Sem follows:
B.E/B.Tech 1st & 2nd Sem Exam Timings : 2:00 Pm to 5:00 Pm
B.E/B.Tech 3rd Sem Exam Timings : 2:00 Pm to 5:00 Pm

VTU B.E/B.Tech Dec 2019/Jan 2020 Exam Timetable for 2018 Scheme follows

InI KA provides you all update information on notices, timetable, syllabus, cutoffs, academic calendar here time to time.

Subscribe, like us on facebook for all updates. Do share with friends and in case of questions please feel free drop a comment.

Wish you Good Luck !!

VTU has released odd sem timetable for B.Tech, M.Tech, MBA, MCA Dec 2019 / Jan 2020 for 2010, 2014, 2015, 2017 & 2018 scheme.

Students can check B.E/B.Tech Dec 2019/ Jan 2020 exam timetable 2017 scheme for 1st, 2nd, 3rd, 4th & 5th sem in detail like course code, timing, date & day and for better preparation you will get to know gap in each exam.

Students get more information on VTU Cutoff that is helpful you in admission, and more over you can get all VTU B.E/B.Tech syllabus for all sem. More over you can follow odd sem Academic Calendar 2019-20.

VTU B.E / B.Tech 2017 Scheme Exam Timings 1st – 5th Sem follows:

InI KA provides you all update information on notices, timetable, syllabus, cutoffs, academic calendar here time to time.

Subscribe, like us on facebook for all updates. Do share with friends and in case of questions please feel free drop a comment.

Wish you Good Luck !!

VTU has released odd sem timetable for B.Tech, M.Tech, MBA, MCA Dec 2019 / Jan 2020 for 2010, 2014, 2015, scheme.

Students can check B.E/B.Tech Dec 2019/ Jan 2020 exam timetable 2015 scheme for 1st, 2nd, 3rd, 4th, 5th, 6th, 7th & 8th sem in detail like course code, timing, date & day and for better preparation you will get to know gap in each exam.

Students get more information on VTU Cutoff that is helpful you in admission, and more over you can get all VTU B.E/B.Tech syllabus for all sem. More over you can follow odd sem Academic Calendar 2019-20.

VTU B.E / B.Tech 2015 Scheme Exam Timings 1st – 8th Sem follows:

VTU B.E/B.Tech Dec 2019/Jan 2020 Exam Timetable for 2015 Scheme follows

InI KA provides you all update information on notices, timetable, syllabus, cutoffs, academic calendar here time to time.

Subscribe, like us on facebook for all updates. Do share with friends and in case of questions please feel free drop a comment.

Wish you Good Luck !!

VTU has released odd sem timetable for B.Tech, M.Tech, MBA, MCA Dec 2019 / Jan 2020 for 2010, 2014, 2015, scheme.

Students can check B.E/B.Tech Dec 2019/ Jan 2020 exam timetable 2014 scheme for 1st & 2nd sem in detail like course code, timing, date & day and for better preparation you will get to know gap in each exam.

Students get more information on VTU Cutoff that is helpful you in admission, and more over you can get all VTU B.E/B.Tech syllabus for all sem. More over you can follow odd sem Academic Calendar 2019-20.

B.E / B.Tech Exam Timings for 1st & 2nd sem : 9:30 Am to 12:30 Pm

VTU B.E/B.Tech Dec 2019/Jan 2020 Exam Timetable for 2014 Scheme 1st & 2nd Sem follows

InI KA provides you all update information on notices, timetable, syllabus, cutoffs, academic calendar here time to time.

Subscribe, like us on facebook for all updates. Do share with friends and in case of questions please feel free drop a comment.

Wish you Good Luck !!

VTU has released odd sem timetable for B.Tech, M.Tech, MBA, MCA Dec 2019 / Jan 2020 for 2010, 2014, 2015, scheme.

Students can check B.E/B.Tech Dec 2019/ Jan 2020 exam timetable 2010 scheme for 1st, 2nd, 3rd, 4th, 5th, 6th, 7th & 8th sem in detail like course code, timing, date & day and for better preparation you will get to know gap in each exam.

Students get more information on VTU Cutoff that is helpful you in admission, and more over you can get all VTU B.E/B.Tech syllabus for all sem. More over you can follow odd sem Academic Calendar 2019-20.

VTU B.E / B.Tech Exam Timings 1st – 8th Sem follows:

VTU B.E/B.Tech Dec 2019/Jan 2020 Exam Timetable for 2010 Scheme follows

InI KA provides you all update information on notices, timetable, syllabus, cutoffs, academic calendar here time to time.

Subscribe, like us on facebook for all updates. Do share with friends and in case of questions please feel free drop a comment.

Wish you Good Luck !!

CREDITS – 04

Course Objectives:  The objectives of this course is to make students to learn:

• To define work, heat, and laws of thermodynamics.
• To explain the concept of entropy
• To calculate load and IHP, BHP of IC engines
• To evaluate thermal performance of refrigeration cycles
• To demonstrate the calculation of efficiency of gas power and vapor power cycles
• To design cost effective thermodynamic systems

Course outcomes: After successful completion of the course, the student will be able to:

• Define and explain fundamental thermodynamic laws and concepts, work, various types of works and heat and its applications, entropy and its relations
• Explain Zeroth, First & Second law of thermodynamics and its applications.
• Explain various thermodynamic relations, constants of gas and basics of ideal gas & its mixtures.
• Calculate load and IHP, BHP of IC engines.
• Explain the selection of air conditioning system; evaluate thermal performance of refrigeration cycles.
• Calculate efficiency and MEP of various gas power & vapor power cycles.
• Explain the principles of gas turbine & jet propulsion system and their fuels.
• Design cost effective thermodynamic systems

NOTE:

• Thermodynamics data hand book, B. T. Nijaguna (to be supplied in the examination)
• A copy of Psychrometry chart to be given along with answer book to the candidates (if needed)

Graduate Attributes (as per NBA):

• Engineering Knowledge.
• Problem Analysis.
• Design / development of solutions (partly).

Question paper pattern:

• The question paper will have ten questions.
• Each full question consists of 16 marks.
• There will be 2 full questions (with a maximum of four sub questions) from each module.
• Each full question will have sub questions covering all the topics under a module.
• The students will have to answer 5 full questions, selecting one full question from each module.

TEXT BOOKS:

• P. K. Nag, Basic and Applied Thermodynamics, Tata McGraw Hul Pub. 2002
• B.K. Venkanna , Applied Thermodynamics, , PHI New Delhi

REFERENCE BOOKS

• Yunus, A. Cenegal and Michael A.Boies ,Thermodynamics, An engineering approach, Tata MacGraw Hill publishing company, 2002,
• G.J. Van Wylen and R.E. Sontang, Fundamental of Classical Thermodynamics, Wiley eastern.

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Automobile Engineering Group.

For more information about all VTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.

CREDITS – 04

COURSE OBJECTIVES : The course intends to:

• Impart fundamental concepts and laws of thermodynamics
• Study PV and TS diagrams for various thermodynamic cycles
• Make students understand entropy changes and write Tds relation.
• Provide knowledge of phase changes in water
• Introduce the concepts of refrigeration, psychrometry and air conditioning system.

COURSE OUTCOMES : After completion of course students are able to

• Apply the laws of thermodynamics in analysis of thermodynamic systems.
• Use PV and TS diagrams for analysis of different thermodynamic processes.
• Evaluate entropy changes
• Calculate enthalpy of water at its different phases
• Calculate the refrigeration and air conditioning loads

COURSE OUTCOMES

UNIT – 1
Fundamental Concepts & Definitions: Thermodynamics definition. Characteristics of system boundary and control surface, examples. Thermodynamic properties – definition and units, intensive and extensive properties. Thermodynamic state, state point, state diagram, path and process, quasi-static process, cyclic and non-cyclic processes; Thermodynamic equilibrium;
Zeroth law of thermodynamics, Temperature; concepts, scales, fixed points and measurements. Work and Heat: Thermodynamic definition of work; examples, sign convention, p-v diagrams. [10 Hours]

UNIT – 2

Download iStudy App (No Ads, No PDFs) for complete VTU syllabus, results, timetables and all other updates.

UNIT – 3
Gas power cycle: Air Standard cycles: Carnot, Otto, Diesel, Dual and Stirling cycles, P-V and T-S diagrams, description, efficiencies and mean effective pressures, Comparison of Otto, Diesel and dual cycles.
Vapour Power Cycles: Carnot vapour power cycles, Simple Rankine cycle, T- S diagram, comparison of Carnot and Rankine cycles. [10 Hours]

UNIT – 4
Entropy: Clasius inequality; Statement, proof, application to a reversible cycle. Entropy; definition, a property, change of entropy, principle of increase in entropy, calculation of entropy using Tds relations.
Pure Substances: P-T and P-V diagrams, triple point and critical points. Subcooled liquid, saturated liquid, mixture of saturated liquid and vapour, saturated vapour and superheated vapour states of pure substance with water as example. Enthalpy of change of phase (Latent heat). Dryness fraction (quality), Steam tables and its use. [10 Hours]

UNIT – 5
Refrigeration: Vapour compression refrigeration system ; description, analysis, refrigerating effect, capacity , power required, units of refrigeration, COP , Refrigerants and their desirable properties. Air cycle refrigeration; reversed Carnot cycle, reversed Brayton cycle, Vapour absorption refrigeration system. Calculation of refrigeration load with examples.
Psychometry: Atmospheric air and psychometric properties; Dry bulb temperature, wet bulb temperature, dew point temperature; partial pressures, specific and relative humidities. Construction and use of psychometric chart . Analysis of various processes; heating, cooling , dehumidifying and humidifying. Summer and winter air conditioning. Calculation of air
conditioning load with examples. [10 Hours]

TEXT BOOKS:

• Basic and Applied Thermodynamics, P.K.Nag, 2nd Ed., Tata McGraw Hill Pub. 2002
• Applied Thermodynamics, Rajput, Laxmi Publication
• Fundamentals of Classical Thermodynamics, G.J.Van Wylen and R.E.Sonntag, Wiley Eastern.

REFERENCE BOOKS:

• Thermodynamics, An Engineering Approach, Yunus A.Cenegal and Michael A.Boles, Tata McGraw Hill publications, 2002
• Engineering Thermodynamics, J.B.Jones and G.A.Hawkins, John Wiley and Sons.
• An Introduction to Thermodynamcis, Y.V.C.Rao, Wiley Eastern, 1993,
• B.K Venkanna, Swati B. Wadavadagi “Basic Thermodynamics, PHI, New Delhi, 2010

Data Hand Book:

• Thermodynamic data hand book, B.T. Nijaguna.
• Properties of Refrigerant & Psychometric (tables & Charts in SI Units), Dr. S.S. Banwait, Dr. S.C. Laroiya, Birla Pub. Pvt. Ltd., Delhi, 2008

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Manufacturing Science & Engineering Group.

For more information about all VTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.

CREDITS – 04

Course objectives: This course will enable students to

• Practice general-purpose machine tools and manufacturing process.
• Operate the special purpose machine tools
• Prepare physical models using different manufacturing processes.

Revised Bloom’s Taxonomy Levels: L1 – Remembering, L2 – Understanding, L3 – Applying, L4 – Analysing, L5 – Evaluating, and L6 – Creating

Course outcomes: After studying this course, students will be able to:

• Demonstrate the operation of general purpose machine tools and manufacturing process.
• Identify the special purpose machine tools for specific requirements
• Develop physical models using different manufacturing processes.

Conduct of Practical Examination:

• All laboratory experiments are to be included for practical examination.
• Students are allowed to pick one experiment from the lot.
• Strictly follow the instructions as printed on the cover page of answer script for breakup of marks.
• Change of experiment is allowed only once and 15% Marks allotted to the procedure part to be made zero.

Graduate Attributes (as per NBA):

• Engineering Knowledge.
• Problem Analysis.
• Design / development of solutions (partly)
• Interpretation of data.

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Aeronautical Engineering Group.

For more information about all VTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.

CREDITS – 04

Course objectives: This course will enable students to

• Learn the concepts of mechanical measurements and metrology
• Use the concept of accuracy, error and calibration
• Use the basic metrological instruments

Revised Bloom’s Taxonomy Levels: L1 – Remembering, L2 – Understanding, L3 – Applying, L4 – Analysing, L5 – Evaluating, and L6 – Creating

• Course outcomes: After studying this course, students will be able to:
• Identify and classify different measuring tools related to experiments.
• Identify, define, and explain accuracy, precision, and some additional terminology.
• Conduct, Analyze, interpret, and present measurement data from measurements experiments.

Conduct of Practical Examination:

• All laboratory experiments are to be included for practical examination.
• Students are allowed to pick one experiment from the lot.
• Strictly follow the instructions as printed on the cover page of answer script for breakup of marks.
• Change of experiment is allowed only once and 15% Marks allotted to the procedure part to be made zero.

Graduate Attributes (as per NBA):

• Engineering Knowledge.
• Problem Analysis.
• Design / development of solutions
• Interpretation of data.

For all other BE/B.Tech 3rd Sem Subject syllabus do follow VTU 3rd Sem BE / B.Tech Syllabus CBCS (2015-16) Scheme for Aeronautical Engineering Group.

For more information about all VTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.