VTU Syllabus AUTO 2018 Scheme (CBCS)

VTU Syllabus AUTO 1st and 2nd Sem 2018

VTU Syllabus AUTO 3rd Sem 2018

VTU Syllabus AUTO 4th Sem 2018

VTU Syllabus AUTO 5th Sem 2018

VTU Syllabus AUTO 6th Sem 2018

VTU Syllabus AUTO 7th Sem 2018

VTU Syllabus AUTO 8th Sem 2018

VTU Syllabus AUTO 2017 Scheme (CBCS)

VTU Syllabus AUTO 1st and 2nd Sem 2017

VTU Syllabus AUTO 3rd Sem 2017

VTU Syllabus AUTO 4th Sem 2017

VTU Syllabus AUTO 5th Sem 2017

VTU Syllabus AUTO 6th Sem 2017

VTU Syllabus AUTO 7th Sem 2017

VTU Syllabus AUTO 8th Sem 2017

For all other details about VTU related academic calendar, notices, new syllabus, results, cutoffs, time table will be updated here time to time.

Don’t forget to download iStudy App and share with your friends for latest updates regarding syllabus and results, class timetable and much more. Incase of questions don’t hesitate to leave a comment or leave a feedback in iStudy App for faster response.

Wish you good luck!!!

For all the other (AUTO) 8th Sem 2018 Scheme subjects, refer to Automobile Engineering 8th Sem 2018. The detailed syllabus for vtu auto 8th sem professional elective-4 syllabus for be 2018 scheme is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For detailed Syllabus of all the other subjects of BE 8th Sem (AUTO), do visit Automobile Engineering 8th Sem Syllabus Subjects.

For the results of BE/B.Tech 8th Sem, kindly visit VTU BE/B.Tech 8th Sem direct result link.

Wishing you great luck ahead.

For all the other VTU AUTO 8th Sem Syllabus for BE 2018 Scheme, visit Automobile Engineering 8th Sem 2018 Scheme.

For all the (Professional Elective-4) subjects refer to Professional Elective-4 Scheme. The detail syllabus for advanced i.c. engines is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Combustion in Spark Ignition Engines: Thermodynamic analysis of SI engine Combustion: Burned and unburned mixture states. Analysis of cylinder pressure data, Combustion process characterization, Flame structure and speed; flame structure, laminar burning speeds, flame propagation relations, Cyclic variations in combustion, partial burning and misfire: definitions, causes of cycle-by-cycle and cylinder to cylinder variations, partial burning, misfire and engine stability. Spark Ignition: Ignition fundamentals, conventional ignition systems, alternative ignition systems, alternative ignition approaches, Abnormal Combustion: knock and surface ignition, knock fundamentals, fuel factors.

Module 2

Combustion in Compression Ignition Engines: Types of diesel combustion systems: Direct injection systems, indirect injection systems, comparison of different combustion systems, Analysis cylinder pressure data; combustion efficiency, DI engines, IDI engines, Fuel spray behaviour: Fuel injection, overall spray structure, atomization, spray penetration, droplet size distribution and spray evaporation, Ignition delay: definitions and discussion, fuel ignition quality, auto ignition fundamentals, physical properties affecting delay, effect of fuel properties.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Modern Developments in I. C. Engines: Lean burn engines, ceramic and adiabatic engines, Multi-valving, Tuned manifolding, camless valve gearing, variable valve timing, Turbo and supercharging-Waste gating, EGR, Part-load charge stratification in GDI systems. Sports vehicle engines, Stirling engines, MPFI engines -operation and performance.

Module 5

Special types of Engines: Introduction to working of startified charged engines, Wankel engine, variable compression engine, Surface ignition engines, free piston engines, Current engines and future trends (e.g. Convergence of SI and CI engine technology, Control developments, fuel quality), Effect of air cleaners and silencers on engine performance. Manifolds and Mixture Distribution: Intake system components, Discharge coefficient, Pressure drop, Air filter, Intake manifold, Connecting pipe, Exhaust system components, Exhaust manifold and exhaust pipe, Spark arresters, Waste heat recovery, Exhaust mufflers, Type of mufflers, exhaust manifold expansion.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.

Text Books:

1. Internal Combustion Engines fundamentals John B. Heywood, McGraw Hill International Edition 1998
2. A course in I. C. Engines Mathur& Sharma DhanpatRai& sons, New Delhi 1994

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AUTO) 8th Sem, visit Automobile Engineering 8th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AUTO 8th Sem Syllabus for BE 2018 Scheme, visit Automobile Engineering 8th Sem 2018 Scheme.

For all the (Professional Elective-4) subjects refer to Professional Elective-4 Scheme. The detail syllabus for electric and hybrid vehicle is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction: Performance characteristics of road vehicles, calculation of road load, predicting fuel economy, Grid connected hybrids DC motors: Series wound, shunt wound. Compound wound and separately excited.

Module 2

AC motors: Induction, synchronous, brushless DC motor, switched reluctance motors. Hybrid Architecture: Series configuration- locomotive drives, series parallel switching, load tracking architecture. Pre transmission parallel and combined configurations-Mild hybrid, power assist, dual mode, power split, power split with shift, Continuously Variable transmission (CVT). Wheel motor.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Sizing the Drive System: Matching electric drive and ICE, sizing the propulsion motor, sizing power electronics Energy Storage Technology: Battery basics, different types of batteries (lead-acid battery / Lithium / Alkaline), High discharge capacitors, flywheels, battery parameters

Module 5

Fuel cells: Fuel cell characteristics, fuel cell types-alkaline fuel cell, proton exchange membrane, direct methanol fuel cell, phosphoric acid fuel cell, molten carbonate fuel cell, solid oxide fuel cell, hydrogen storage systems, reformers, fuel cell EV.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.

Text Books:

1. The Electric Car: Development & Future of Battery, Hybrid &Fuel-Cell Cars Dr Mike Westbrook, M H Westbrook British library Cataloguing in Publication Data, UK ISBN0 85296 0131.
2. Electric and Hybrid Vehicles Robin Hardy, Iqbal Husain CRC Press f 0-8493-1466-6.

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AUTO) 8th Sem, visit Automobile Engineering 8th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AUTO 8th Sem Syllabus for BE 2018 Scheme, visit Automobile Engineering 8th Sem 2018 Scheme.

For all the (Professional Elective-4) subjects refer to Professional Elective-4 Scheme. The detail syllabus for mechanical vibrations is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction: Types of vibration, Simple harmonic motion and definition of some terms of vibration, Vector method and complex form of representing harmonic motions, addition of simple harmonic motions. Un-damped free vibration: Introduction, Newton’s second law of motion method, D’Alembert’s principle, Energy method, Single degree of freedom systems, Natural frequency of free vibration, equivalent stiffness of springs, effect of spring mass.

Module 2

Damped free vibration: Single degree of freedom systems, types of damping, concept of critical damping and its importance, study of viscous damped systems-under damping, critical damping and over damping, logarithmic decrement, structural and coulomb damping. Whirling of shafts: Whirling of shafts with and without air damping, discussion of speeds above and below critical speeds.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Two degree of freedom systems: Introduction, principle and normal modes of vibration, co-ordinate coupling, generalized and principal co-ordinates, orthogonality principle, Lagrange’s equation, semi-definite systems, forced vibrations, harmonic excitation. Applications: Vehicle suspension, Dynamic vibration absorber, dynamics of reciprocating engines. Vibration measuring instruments: Vibrometer, Accelerometer and frequency measuring instruments.

Module 5

Multi degree of freedom systems: Introduction, influence coefficients, Maxwell’s reciprocal theorem, orthogonality principle, Dunker ley’s equation, determination of natural frequencies using matrix iteration method, Holzer’s method for systems with free, fixed free and fixed ends, stodola method, Rayleigh’s method for beam vibration.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.

Text Books:

1. Mechanical Vibrations G. K. Grover and S. P. Nigam Nemchand and Brothers, Roorkee. 2009
2. Mechanical Vibrations V. P. Singh Dhanpat Rai and Sons, New Delhi 2001

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AUTO) 8th Sem, visit Automobile Engineering 8th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AUTO 7th Sem Syllabus for BE 2018 Scheme, visit Automobile Engineering 7th Sem 2018 Scheme.

For all the (Professional Elective-3) subjects refer to Professional Elective-3 Scheme. The detail syllabus for two and three wheeled vehicle is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction: History and layouts of mopeds, scooters, motor cycles, , classification of two wheelers, basic systems of two wheelers, Two wheeler dynamics: Linear and angular motion, handling characteristics, road holding, vehicle stability and aerodynamics, performance measurement.

Module 2

Fuel, Lubrication And Cooling System: Layout of fuel supply system, fuel tank construction, carburettor types, construction, working and adjustments. Types of cooling systems, advantages of air cooling system. Lubrication types, Lubrication of parts, grades of lubricating oils. Electrical System: Types of ignition system, their working principles, wiring diagram for Indian vehicles, spark plug construction, indicators and gauges used in two wheelers, lighting systems.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Frames And Suspension: Types and constructional details of frames, advantages and limitations, frame materials, frame stresses, frame building problems, frame components, Front and Rear suspension systems, shock absorber construction and working, Panel meters and controls on handle bar, body manufacture and painting. Brakes and Wheels: Front and rear braking systems, disc and drum brakes, merits and demerits, Types of wheels, loads on wheels, construction and materials for wheels, wheels designation, tyre designation, inflation, types of tyres, construction details.

Module 5

Three Wheelers: Classification of three wheelers, layout of passenger three wheeler, load carriers, types of commercial three wheeled vehicles, Drive train of passengers and commercial three wheelers, suspension and brakes of three wheelers Maintenance: Importance of maintenance, Decarburizing procedure for engine and silencer, periodic inspection, maintenance schedules, trouble diagnosis charts, safety precautions, Lubrication charts.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Two and three wheeler technology Dhruv U. Panchal PHI 2015
2. Motor cycle Mechanics William H. Crouse and Donald L. TMH 2001

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AUTO) 7th Sem, visit Automobile Engineering 7th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other (AUTO) 7th Sem 2018 Scheme subjects, refer to Automobile Engineering 7th Sem 2018. The detailed syllabus for vtu auto 7th sem professional elective-3 syllabus for be 2018 scheme is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For detailed Syllabus of all the other subjects of BE 7th Sem (AUTO), do visit Automobile Engineering 7th Sem Syllabus Subjects.

For the results of BE/B.Tech 7th Sem, kindly visit VTU BE/B.Tech 7th Sem direct result link.

Wishing you great luck ahead.

For all the other VTU AUTO 7th Sem Syllabus for BE 2018 Scheme, visit Automobile Engineering 7th Sem 2018 Scheme.

For all the (Professional Elective-3) subjects refer to Professional Elective-3 Scheme. The detail syllabus for control engineering is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction to Control Systems and Mathematical Models Introduction: Concept of controls, Open loop and closed loop systems with examples, Concepts of feedback and basic structure of feedback control system, requirements of an ideal control system. Mathematical Models: Transfer function models of mechanical systems, electrical circuits, DC and AC motors in control systems, Analogous systems: Force voltage and Force current analogy.

Module 2

Block Diagrams and Signal Flow Graphs Transfer functions definition and its properties, block representation of control systems and terminologies, block diagram algebra and reduction of block diagrams, Signal flow graph method, Mason’s gain formula and its applications Transient and Steady State Response Analysis Introduction, type and order of systems, time response specifications, first order and second order system response to step, ramp and impulse inputs, concepts of time constant and its importance in speed of response.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Frequency Response Specification and Analysis using Polar plots: Specification: Frequency response definition, frequency response specifications and its relationship with time response specifications. Analysis: Polar plots, Nyquist stability criterion, Stability analysis, Relative stability concepts, Gain margin and phase margin, M&N circles.

Module 5

Feedback control systems: Types of controllers-Proportional, Integral, Derivative controllers, Proportional-Integral, Proportional -Integral-Derivative controllers; Compensation methods-Series and feedback compensation, Lead, Lag and Lead-Lag Compensators. State Variable Characteristics of Linear Systems: Introduction to concepts of states and state variable representation of linear systems, Advantages and Disadvantages over conventional transfer function representation, state equations of linear continuous data system. Matrix representation of state equations, Solution of state equation, State transition matrix and its properties, controllability and observability, Kalman and Gilberts test.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Control Engineering U.A. Bakshi and V.U. Bakshi Technical Publications
2. Control Systems Engineering A. NagoorKani RBA Publications 2014

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AUTO) 7th Sem, visit Automobile Engineering 7th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AUTO 7th Sem Syllabus for BE 2018 Scheme, visit Automobile Engineering 7th Sem 2018 Scheme.

For all the (Professional Elective-3) subjects refer to Professional Elective-3 Scheme. The detail syllabus for operations research is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction: Evolution of OR, definition of OR, scope of OR, application areas of OR, steps (phases) in OR study, characteristics and limitations of OR, models used in OR, linear programming (LP) problem-formulation and solution by graphical method. Solution Of Linear Programming Problems: The simplex method-canonical and standard form of an LP problem, slack, surplus and artificial variables, big M method and concept of duality, dual simplex method.

Module 2

Transportation Problem: Formulation of transportation problem, types, initial basic feasible solution using different methods, optimal solution by MODI method, degeneracy in transportation problems, application of transportation problem concept for maximization cases. Assignment Problem-formulation, types, application to maximization cases and travelling sales man problem.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Queuing Theory: Queuing systems and their characteristics, Pure-birth and Pure-death models (only equations), empirical queuing models-M/M/1 and M/M/C models and their steady state performance analysis. Game Theory: Formulation of games, types, solution of games with saddle point, graphical method of solving mixed strategy games, dominance rule for solving mixed strategy games.

Module 5

Sequencing: Basic assumptions, sequencing n’ jobs on single machine using priority rules, sequencing using Johnson’s rule-n’ jobs on 2 machines, n’ jobs on 3 machines, n’ jobs on m’ machines. Sequencing 2 jobs on m’ machines using graphical method.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Operations Research P K Gupta and D S Hira Chand Publications, New Delhi Revised edition, 2007
2. Operations Research Taha H A Pearson Education 9th edition,2014

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AUTO) 7th Sem, visit Automobile Engineering 7th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AUTO 7th Sem Syllabus for BE 2018 Scheme, visit Automobile Engineering 7th Sem 2018 Scheme.

For all the (Professional Elective-2) subjects refer to Professional Elective-2 Scheme. The detail syllabus for computer integrated manufacturing is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Computer Integrated Manufacturing Systems: Introduction, Automation definition, Types of automation, CIM, processing in manufacturing, Production concepts, Mathematical Models-Manufacturing lead time, production rate, components of operation time, capacity, Utilization and availability, Work-in-process, WIP ratio, TIP ratio, Problems using mathematical model equations. High Volume Production System: Introduction Automated flow line-symbols, objectives, Work part transport-continuous, Intermittent, synchronous, Pallet fixtures, Transfer Mechanism-Linear-Walking beam, roller chain drive, Rotary-rack and pinion, Rachet& Pawl, Geneva wheel, Buffer storage, control functions-sequence, safety, Quality.

Module 2

Analysis of Automated Flow line & Line Balancing: General terminology and analysis, Analysis of Transfer Line with Out storage-upper bound approach, lower bound approach and problems, Analysis of Transfer lines with storage buffer, Effect of storage, buffer capacity with example problem, Partial automation-with numerical problem example, flow lines with more than two stage, Manual Assembly lines balancing numerical problems.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Minimum Rational Work Element: Work station process time, Cycle time, precedence constraints. Precedence diagram, balance delay methods of line balancing-largest candidate rule, Kilbridge and Westers method, Ranked positional weight method, Numerical problems covering above methods and computerized line balancing. Computerized Manufacturing Planning System: Introduction, Computer Aided process planning, Retrieval types of process planning, Generative type of process planning, Material requirement planning, Fundamental concepts of MRP inputs to MRP, Capacity planning.

Module 5

CNC Machining Centers: Introduction to CNC, elements of CNC, CNC machining centers, part programming, and fundamental steps involved in development of part programming for milling and turning. Robotics: Introduction to Robot configuration, Robot motion, and programming of Robots end effectors, Robot sensors and Robot applications.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Automation, Production system & Computer Integrated M.P. Grover Person India, 2007
2. Principles of Computer Integrated Manufacturing S. Kant Vajpayee Prentice Hall India 2001

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AUTO) 7th Sem, visit Automobile Engineering 7th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.