VTU Syllabus AERO 2018 Scheme (CBCS)

VTU Syllabus AERO 1st and 2nd Sem 2018

VTU Syllabus AERO 3rd Sem 2018

VTU Syllabus AERO 4th Sem 2018

VTU Syllabus AERO 5th Sem 2018

VTU Syllabus AERO 6th Sem 2018

VTU Syllabus AERO 7th Sem 2018

VTU Syllabus AERO 8th Sem 2018

VTU Syllabus AERO 2017 Scheme (CBCS)

VTU Syllabus AERO 1st and 2nd Sem 2017

VTU Syllabus AERO 3rd Sem 2017

VTU Syllabus AERO 4th Sem 2017

VTU Syllabus AERO 5th Sem 2017

VTU Syllabus AERO 6th Sem 2017

VTU Syllabus AERO 7th Sem 2017

VTU Syllabus AERO 8th Sem 2017

For all other details about VTU related academic calendar, notices, new syllabus, results, cutoffs, time table will be updated here time to time.

Don’t forget to download iStudy App and share with your friends for latest updates regarding syllabus and results, class timetable and much more. Incase of questions don’t hesitate to leave a comment or leave a feedback in iStudy App for faster response.

Wish you good luck!!!

For all the other VTU AERO 8th Sem Syllabus for BE 2018 Scheme, visit Aeronautical Engineering 8th Sem 2018 Scheme.

For all the (Professional Elective-4) subjects refer to Professional Elective-4 Scheme. The detail syllabus for flight testing is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction: Sequence, Planning and governing regulations of flight testing. Aircraft weight and center of gravity, flight testing tolerances. Method of reducing data uncertainty in flight test data -sources and magnitudes of error, avoiding and minimizing errors.
Flight test instrumentation: Planning flight test instrumentation, Measurement of flight parameters. Onboard and ground based data acquisition system. Radio telemetry.

Module 2

Performance flight testing-range, endurance and climb: Airspeed-in flight calibration. Level flight performance for propeller driven aircraft and for Jet aircraft-Techniques and data reduction. Estimation of range, endurance and climb performance.
Performance flight testing -take-off, landing, turning flight: Maneuvering performance estimation. Takeoff and landing -methods, procedures and data reduction.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Stability and control-lateral and directional
Lateral and directional static & dynamic stability:-Coupling between rolling and yawing moments. Steady heading slide slip. Definition of Roll stability. Adverse yaw effects. Aileron reversal. Regulations, test techniques and method of data reduction.

Module 5

Flying qualities: MIL and FAR regulations. Cooper-Harper scale. Pilot Rating. Flight test procedures. Hazardous flight testing: Stall and spin- regulations, test and recovery techniques. Test techniques for flutter, vibration and buffeting.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Flight Testing of Fixed Wing Aircraft Ralph D Kimberlin AIAA educational Series 2003
2. Flight Testing- Conventional and Jet Propelled Airplanes Benson Hamlin Mac Millan 1946

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AERO) 8th Sem, visit Aeronautical Engineering 8th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other (AERO) 8th Sem 2018 Scheme subjects, refer to Aeronautical Engineering 8th Sem 2018. The detailed syllabus for vtu aero 8th sem professional elective-4 syllabus for be 2018 scheme is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For detailed Syllabus of all the other subjects of BE 8th Sem (AERO), do visit Aeronautical Engineering 8th Sem Syllabus Subjects.

For the results of BE/B.Tech 8th Sem, kindly visit VTU BE/B.Tech 8th Sem direct result link.

Wishing you great luck ahead.

For all the other VTU AERO 8th Sem Syllabus for BE 2018 Scheme, visit Aeronautical Engineering 8th Sem 2018 Scheme.

For all the (Professional Elective-4) subjects refer to Professional Elective-4 Scheme. The detail syllabus for helicopter dynamics is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction: History of helicopter flight. Fundamentals of Rotor Aerodynamics; Momentum theory analysis in hovering flight. Disk loading, power loading, thrust and power coefficients. Figure of merit, rotor solidity and blade loading coefficient. Power required in flight. Axial climb, descent, and autorotation. Blade Element Analysis: Blade element analysis in hovering and forward flight. Rotating blade motion. Types of rotors. Concept of blade flapping, lagging and coning angle. Equilibrium about the flapping hinge, lead/lag hinge, and drag hinge.

Module 2

Basic Helicopter Performance: Forces acting on helicopters in forward flight. Methods of achieving translatory flight. Controlling cyclic pitch: Swash-plate system. Lateral tilt with and without conning. Lateral and longitudinal asymmetry of lift in forward flight. Forward flight performance- total power required, effects of gross weight, effect of density altitude. Speed for minimum power, and speed for maximum range. Factors affecting forward speed, and ground effects.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Helicopter Stability and Control. Introductory concepts of stability.Forward speed disturbance, vertical speed disturbance, pitching angular velocity disturbance, side-slip disturbance, yawing disturbance. Static stability of helicopters: longitudinal, lateral-directional and directional. Dynamic stability aspects. Main rotor and tail rotor control. Flight and Ground Handling Qualities-General requirements and definitions. Control characteristics, Levels of handling qualities. Flight Testing- General handing flight test requirements and, basis of limitations.

Module 5

Standards and Specifications: Scope of requirements. General and operational requirements. Military derivatives of civil rotorcraft. Structural strength and design for operation on specified surfaces. Rotorcraft vibration classification. Conceptual Design of Helicopters: Overall design requirements. Design of main rotors-rotor diameter, tip speed, rotor solidity, blade twist and aerofoil selection, Fuselage design, Empennage design, Design of tail rotors, High speed rotorcraft.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selectinu one full question from each module.

Text Books:

1. Principles of Helicopter Aerodynamics J. Gordon Leishman Cambridge University Press 2002
2. Dynamics of Helicopter Flight George H. Saunders John Wiley & Sons, Inc, NY 1975

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AERO) 8th Sem, visit Aeronautical Engineering 8th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AERO 8th Sem Syllabus for BE 2018 Scheme, visit Aeronautical Engineering 8th Sem 2018 Scheme.

For all the (Professional Elective-4) subjects refer to Professional Elective-4 Scheme. The detail syllabus for avionics is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Power Distribution System: Bus Bar, split bus bar system, special purpose cables. Electrical diagram and identification scheme. Circuit controlling devices. Power utilization-typical application to avionics. Need for Avionics in civil and military aircraft.

Module 2

Inertial Navigation System: Gyroscopic versus Inertial platform. Structure of stable platform. Inertial Navigation units. Inertial alignment. Inertial interface system. Importance of Compass swing. Electronic Flight Control System: Fly-by-wire system:-basic concept and features. Pitch and Roll rate:-command and response. Control Laws. Frequency response of a typical FBW actuator. Cooper Harper scale. Redundancy and failure survival. Common mode of failures and effects analysis.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Principles of Digital Systems: Digital Computers, Microprocessors, Memories. Flight Deck and Cockpits: Control and display technologies CRT, LED, LCD, EL and plasma panel, Touch screen, Direct voice input (DVI)-Civil cockpit and military cockpit : MFDS, HUD, MFK, and HOTAS.

Module 5

Avionics Systems Integration: Avionics equipment fit. Electrical data bus system. Communication Systems, Navigation systems, Flight control systems, Radar, Electronic Warfare, and fire control system. Avionics system architecture, Data buses, MIL-STD1553B.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Introduction to Avionics Systems R.P.G. Collinson Springer 3rd edition, 2011
2. Aircraft Systems: Mechanics, Electrical and Avionics Subsystems Integration Ian Moir, Allan Seabridge Wiley 3rd Edition, 2012

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AERO) 8th Sem, visit Aeronautical Engineering 8th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AERO 8th Sem Syllabus for BE 2018 Scheme, visit Aeronautical Engineering 8th Sem 2018 Scheme.

For all the (Professional Elective-4) subjects refer to Professional Elective-4 Scheme. The detail syllabus for boundary layer theory is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Preliminary Concepts Some examples of viscous flow phenomena:-aerofoil, cylinder, circular pipe. Boundary conditions for viscous flow problems. The kinematics properties of viscous flow. Fundamental Equations of Viscous Flow Conservation of mass, momentum and energy equations. Mathematical characterisation of basic equations. Dimensionless parameters in viscous flow.

Module 2

Solutions of Viscous Flow Equations Classification of solutions. Couette flow, stability of Couette flow. Poiseuille steady flow through duct. Unsteady duct flow between plates with bottom injection and top suction. Plane stagnation flow- differential equation free of parameters.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Laminar Boundary Layer Equations Dimensionless variables. Laminar boundary layer equations. Similarity solutions for steady two-dimensional flow. Blasius solution for flat- plate flow, wall shear stress. Flat plate heat transfer for constant wall temperature. Some examples of Falkner-Skan potential flows. Reynolds analogy as a function of pressure gradient.

Module 5

Transition to Turbulence Stability of laminar flows-concept of small disturbance stability. Temporal instability and Spatial instability. Stability of Blasius and Falkner-Skan profiles. Effect of wall temperature. Transition to turbulence. Affecting parameters Incompressible Turbulent Mean Flow Physical and mathematical description of turbulence. Fluctuations and time averaging. Turbulent flow in pipes and channels. Free turbulence:-jets, wakes and mixing layers. Instrumentation and Measurements: Hot wire and Hot film anemometer for turbulence measurements. Schlieren methods for flow visualization. Pressure probes, Interferometer and Smoke method.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Boundary Layer Theory H. Schlichting McGraw- Hill, New York 1979
2. Viscous Fluid flow Frank White McGraw Hill 1991

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AERO) 8th Sem, visit Aeronautical Engineering 8th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other (AERO) 7th Sem 2018 Scheme subjects, refer to Aeronautical Engineering 7th Sem 2018. The detailed syllabus for vtu aero 7th sem professional elective-3 syllabus for be 2018 scheme is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For detailed Syllabus of all the other subjects of BE 7th Sem (AERO), do visit Aeronautical Engineering 7th Sem Syllabus Subjects.

For the results of BE/B.Tech 7th Sem, kindly visit VTU BE/B.Tech 7th Sem direct result link.

Wishing you great luck ahead.

For all the other VTU AERO 7th Sem Syllabus for BE 2018 Scheme, visit Aeronautical Engineering 7th Sem 2018 Scheme.

For all the (Professional Elective-3) subjects refer to Professional Elective-3 Scheme. The detail syllabus for guidance, navigation & control is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction Concepts of navigation, guidance and control. Introduction to basic principles. Air data information. Radar Systems Principle of working of radar. MTI and Pulse Doppler radar. Moving target detector. Limitation of MTI performance. MTI from a moving platform (AMTI).

Module 2

Tracking with Radar Mono pulse tracking. Conical scan and sequential lobbing. Automatic tracking with surveillance radar (ADT). Other Guidance Systems Gyros and stabilized platforms. Inertial guidance and Laser based guidance. Components of Inertial Navigation System. Imaging Infrared guidance. Satellite navigation. GPS.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Missile Guidance Proportional navigation guidance; command guidance. Comparison of guidance system performance. Bank to turn missile guidance

Module 5

Integrated Flight/Fire Control System Director fire control system. Tracking control laws. Longitudinal flight control system. Lateral flight control system. Rate of change of Euler angle, Auto Pilot.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Fundamentals of Aerospace Navigation and Guidance P.T. Kabamba and A.R. Girard Cambridge Aerospace Series 2014
2. Automatic control of Aircraft & Missiles John H Blakelock Wile -Inter SciencePublication 2nd edition, May 1990

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AERO) 7th Sem, visit Aeronautical Engineering 7th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AERO 7th Sem Syllabus for BE 2018 Scheme, visit Aeronautical Engineering 7th Sem 2018 Scheme.

For all the (Professional Elective-3) subjects refer to Professional Elective-3 Scheme. The detail syllabus for operations research is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Introduction: Evolution of OR, definition of OR, scope of OR, application areas of OR, steps (phases) in OR study, characteristics and limitations of OR, models used in OR, linear programming (LP) problem-formulation and solution by graphical method. Solution Of Linear Programming Problems: The simplex method-canonical and standard form of an LP problem, slack, surplus and artificial variables, big M method and concept of duality, dual simplex method.

Module 2

Transportation Problem: Formulation of transportation problem, types, initial basic feasible solution using different methods, optimal solution by MODI method, degeneracy in transportation problems, application of transportation problem concept for maximization cases. Assignment Problem-formulation, types, application to maximization cases and travelling sales man problem.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Queuing Theory: Queuing systems and their characteristics, Pure-birth and Pure-death models (only equations), empirical queuing models-M/M/1 and M/M/C models and their steady state performance analysis. Game Theory: Formulation of games, types, solution of games with saddle point, graphical method of solving mixed strategy games, dominance rule for solving mixed strategy games.

Module 5

Sequencing: Basic assumptions, sequencing n’ jobs on single machine using priority rules, sequencing using Johnson’s rule-n’ jobs on 2 machines, n’ jobs on 3 machines, n’ jobs on m’ machines. Sequencing 2 jobs on m’ machines using graphical method.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. Operations Research P K Gupta and D S Hira Chand Publications, New Delhi Revised edition, 2007
2. Operations Research Taha H A Pearson Education 9th edition,2014

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AERO) 7th Sem, visit Aeronautical Engineering 7th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.

For all the other VTU AERO 7th Sem Syllabus for BE 2018 Scheme, visit Aeronautical Engineering 7th Sem 2018 Scheme.

For all the (Professional Elective-3) subjects refer to Professional Elective-3 Scheme. The detail syllabus for high performance computing is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 1

Computational Science and Engineering Introduction: Computational Science and Engineering Applications; characteristics and requirements, Review of Computational Complexity, Performance: metrics and measurements, Granularity and Partitioning, Locality: temporal/spatial/stream/kernel, Basic methods for parallel programming, Real-world case studies (drawn from multi-scale, multi-discipline applications.

Module 2

High-End Computer Systems: Memory Hierarchies, Multi-core Processors: Homogeneous and Heterogeneous, Shared-memory Symmetric Multiprocessors, Vector Computers, Distributed Memory Computers, Supercomputers and Petascale Systems, Application Accelerators / Reconfigurable Computing, Novel computers: Stream, multithreaded, and purpose-built.

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module 4

Parallel Programming: Revealing concurrency in applications, Task and Functional Parallelism, Task Scheduling, Synchronization Methods, Parallel Primitives (collective operations), SPMD Programming (threads, Open MP, MPI), I/O and File Systems, Parallel Matlabs (Parallel Matlab, Star-P, Matlab MPI), Partitioning Global Address Space (PGAS) languages (UPC, Titanium, Global Arrays).

Module 5

Achieving Performance: Measuring performance, identifying performance bottlenecks, Restructuring applications for deep memory hierarchies, Partitioning applications for heterogeneous resources, Using existing libraries, tools, and frameworks.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Question paper pattern:

• The question paper will have ten full questions carrying equal marks.
• Each full question will be for 20 marks.
• There will be two full questions (with a maximum of four sub- questions) from each module.
• Each full question will have sub- question covering all the topics under a module.
• The students will have to answer five full questions, selecting one full question from each module.

Text Books:

1. An Introduction to Parallel Computing, Design and Analysis of Algorithms Grama, A. Gupta, G. Karypis, V. Kumar Pearson Education India 2nd edition, 2004
2. Parallel Scientific Computing in C++ and MPI: A Seamless Approach to Parallel Algorithms and their Implementation G.E. Karniadakis, R.M. Kirby II Cambridge University Press 2003

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For the detail Syllabus of all other subjects of BE (AERO) 7th Sem, visit Aeronautical Engineering 7th Sem Subjects.

For all (CBSE & Non-CBSC) BE/B.Tech results, visit VTU BE/B.Tech all semester results.