3rd Sem, Textile

18TXL36: Spinning Technology Lab-I Textile Syllabus for BE 3rd Sem 2018 Scheme VTU

Spinning Technology Lab-I detailed Syllabus for Textile Engineering Textile, 2018 scheme has been taken from the VTUs official website and presented for the VTU students. For Course Code, Teaching Department, Paper Setting Board, Theory Lectures, Tutorial, Practical/Drawing, Duration in Hours, CIE Marks, Total Marks, Credits and other information do visit full semester subjects post given below. The Syllabus PDF files can also be downloaded from the official website of the university.

For all other VTU Textile 3rd Sem Syllabus for BE 2018 Scheme, do visit VTU Textile 3rd Sem Syllabus for BE 2018 Scheme Subjects. The detailed Syllabus for spinning technology lab-i is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
Get it on Google Play.

Experiments

  1. Blow Room: Passage of material through the blow room and different openers and beaters of blow room. Selection of beating points and study of their design features and to evaluate their efficiencies
  2. Driving arrangements and demonstration of all machineries and calculations of speeds of different parts of each machineries
  3. Calculation of cleaning efficiency at all beaters and openers. Working on Trash Analyser and related Calculations
  4. Study of piano feed regulating motion and calculation of cone drum speed, feed Roller speed and beats/inch.
  5. Production and CV% calculation in Blow Room laps (within and between).
  6. Identification of Blow Room process for different mixings, impurities and counts.
  7. Carding: Explanation of Passage of material through revolving flat card.
  8. Speed and draft calculation of different parts of carding with the help of gearing and driving
  9. Draft constant and its calculation.
  10. Draft change pinion calculation and machine operation to get different hank of slivers.
  11. Calculation on snap study to analyse neps, sliver variations and efficiency
  12. Settings of different parts and gauges used setup the machines
  13. Comparison between conventional and modern high speed card with respect to production, efficiency and quality of sliver.
  14. Hank and CV calculation of sliver.
  15. Draw Frame: Passage of material through draw frame and list the parts and their functions.
  16. Different types of drafting system and describe salient features of modern draw frames
  17. Break draft, main draft and total draft calculation.
  18. Production, delivery speed, calculation of hank of sliver, efficiency calculation of draw frame
  19. Setting of drafting zone and processing of material as per the hank required
  20. Comber: Study of preparatory machines to comber. Study of one cycle of combing. Detachment setting and its importance. Setting of comber parts with the help of index numbers.
  21. Production, speed, efficiency, draft calculation of comber
  22. Working on comber. Demonstration of comber working

Course Outcomes:

At the end of the course the student will be able to:

  1. Learn the practical aspects of the machineries used
  2. Gain knowledge about the process parameters such as Settings, Speeds of Blow room and Carding
  3. Will be able to define the actual running of the machineries.

Conduct of Practical Examination:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
Get it on Google Play.

For detail Syllabus of all other subjects of BE Textile Engineering, 2018 scheme do visit Textile Engineering 3rd Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results direct links.

Leave a Reply

Your email address will not be published. Required fields are marked *

*