18TX43: Spinning Technology-II Textile Syllabus for BE 4th Sem 2018 Scheme VTU

Spinning Technology-II detailed Syllabus for Textile Engineering Textile, 2018 scheme has been taken from the VTUs official website and presented for the VTU students. For Course Code, Teaching Department, Paper Setting Board, Theory Lectures, Tutorial, Practical/Drawing, Duration in Hours, CIE Marks, Total Marks, Credits and other information do visit full semester subjects post given below. The Syllabus PDF files can also be downloaded from the official website of the university.

For all other VTU Textile 4th Sem Syllabus for BE 2018 Scheme, do visit VTU Textile 4th Sem Syllabus for BE 2018 Scheme Subjects. The detailed Syllabus for spinning technology-ii is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module-1

Objects of speed frame, study of different drafting systems and importance of apron drafting system. Principle of twisting and winding in speed frame. Study of different types of flyers, building mechanism, lift, chase length and their importance. Study of differential gearing mechanism and its importance. Different types of change point at speed frame. Modern developments in speed frame and salient features of the modern speed frame.

Module-2

Objects of ring spinning, study of different drafting systems and type importance. Principles of twisting, factors affecting the twist Calculation, Difference between Actual and Practical TPI. Principal of winding. Types of builts Roller setting, draft and its calculation. Rings and Travellers. Different types of rings, selection of rings and manufacture of rings. Types of travellers, traveller numbering both in direct and indirect system. Manufacture of travellers.

Module-3

Module-4

Open-end spinning – principle and objects of open-end spinning. Classification of open-end spinning. Principle and Technique of rotor spinning and detailed study of rotor spinning such as initial drafting, transport zone, twisting and yarns formation Types of opening rollers and rotors and their effect on the performance of OE machine. Calculations of Open end spinning machines. Modern developments in OE machine.

Module-5

Fancy yarns and their production and applications. Study of Advanced Spinning systems such as DREF spinning, Air jet spinning, Twist less spinning, Bob-Tex Spinning, Core and Cover spun yarn spinning. Quality studies of all unconventional methods of spinning. Comparison between conventional and unconventional methods of spinning.

Course Outcomes:

Question Paper Pattern:

The question paper will have ten full questions carrying equal marks. Each full question consisting of 20 marks.
There will be two full questions (with a maximum of four sub questions) from each module.
Each full question will have sub question covering all the topics under a module.
The students will have to answer five full questions, se lecting one full question from each module.

Text Books:

Manual of Cotton Spinning Coulson. A.F.W. Ed, Vol. I to IV Textile Institute, Manchester,1958 1958
Series on Textile processing Zaloski.S The Institute of Textile Technology, USA 1983
Technology of short-staple spinning Klein.W.,Vol.I, II, III and IV Textile Institute Pub., Manchester 1989
Spun Yarn Technology Oxtoby Butterworths, London 1987

Reference Books:

For detail Syllabus of all other subjects of BE Textile Engineering, 2018 scheme do visit Textile Engineering 4th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results direct links.

InI KA