18MEL66: Computer Aided Modelling and Analysis Lab ME Syllabus for BE 6th Sem 2018 Scheme VTU

Computer Aided Modelling and Analysis Lab detailed Syllabus for Mechanical Engineering (ME), 2018 scheme has been taken from the VTUs official website and presented for the VTU students. For Course Code, Teaching Department, Paper Setting Board, Theory Lectures, Tutorial, Practical/Drawing, Duration in Hours, CIE Marks, Total Marks, Credits and other information do visit full semester subjects post given below. The Syllabus PDF files can also be downloaded from the official website of the university.

For all other VTU 6th Sem ME Syllabus for BE 2018 Scheme, do visit VTU 6th Sem ME Syllabus for BE 2018 Scheme Subjects. The detailed Syllabus for computer aided modelling and analysis lab is as follows.

Course Learning Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Experiments

PART A

1. Study of a FEA package and modeling and stress analysis of:
   1. Bars of constant cross section area, tapered cross section area and stepped bar
   2. Trusses – (Minimum 2 exercises of different types)
   3. Beams – Simply supported, cantilever, beams with point load , UDL, beams with varying load etc. (Minimum 6 exercises)
   4. Stress analysis of a rectangular plate with a circular hole.

PART B

1. Thermal Analysis – 1D & 2D problem with conduction and convection boundary conditions (Minimum 4 exercises of different types )
2. Dynamic Analysis to find:
   1. Natural frequency of beam with fixed – fixed end condition
   2. Response of beam with fixed – fixed end conditions subjected to forcing function
   3. Response of Bar subjected to forcing functions

PART C(only for demo)

1. Demonstrate the use of graphics standards (IGES, STEP etc) to import the model from modeler to solver.
2. Demonstrate one example of contact analysis to learn the procedure to carry out contact analysis.
3. Demonstrate at least two different types of example to model and analyze bars or plates made from composite material

Course Outcomes:

At the end of the course, the student will be able to:

1. CO1: Use the modern tools to formulate the problem, create geometry, descritize, apply boundary conditions to solve problems of bars, truss, beams, and plate to find stresses with different-loading conditions.
2. CO2: Demonstrate the ability to obtain deflection of beams subjected to point, uniformly distributed and varying loads and use the available results to draw shear force and bending moment diagrams.
3. CO3: Analyze and solve 1D and 2D heat transfer conduction and convection problems with different boundary conditions.
4. CO4: Carry out dynamic analysis and finding natural frequencies of beams, plates, and bars for various boundary conditions and also carry out dynamic analysis with forcing functions.

Conduct of Practical Examination:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Scheme of Examination:

1. One Question from Part A – 40 Marks
2. One Question from Part B – 40 Marks
3. Viva-Voce – 20 Marks

For detail Syllabus of all other subjects of BE Mechanical Engineering, 2018 scheme do visit Mechanical Engineering 6th Sem Syllabus for 2018 scheme.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results direct links.