Material Science and Metallurgy detailed Syllabus for Industrial & Production Engineering (IPE), 2018 scheme has been taken from the VTUs official website and presented for the VTU students. For Course Code, Subject Names, Teaching Department, Paper Setting Board, Theory Lectures, Tutorial, Practical/Drawing, Duration in Hours, CIE Marks, Total Marks, Credits and other information do visit full semester subjects post given below. The Syllabus PDF files can also be downloaded from the official website of the university.
For all other VTU IPE 4th Sem Syllabus for BE 2018 Scheme, do visit VTU IPE 4th Sem Syllabus for BE 2018 Scheme Subjects. The detailed Syllabus for material science and metallurgy is as follows.
Course Learning Objectives:
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.
Module-1
Crystal Structure Unit Cells, Crystal systems, BCC, FCC, and HCP structures, Coordination number and atomic packing factors Crystal Imperfection-Point, line and surface imperfections. Atomic Diffusion -Fick’s laws of diffusion, Factors affecting Diffusion, Steady and non-steady state diffusions
Module-2
Dislocation Characteristics of dislocations slip systems, slip in single crystals, Plastic deformation of polycrystalline materials, Deformation by twinning Fracture: Types of fracture, ductile and brittle fracture, Ductile to brittle transition temperature Fatigue and creep: Cyclic stresses, SN curves, crack initiation and propagation, Factors
Module-3
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Module-4
Heat Treatment of Metals Annealing and its types, normalizing, Hardening, tempering, Martempering, Austempering, Hardenability, surface hardening methods like carburizing, cyaniding, Nitriding, Flame hardening and induction hardening. Age hardening of Aluminium -Copper alloys Recovery. Recrystallization and Grain: Growth Recrystallization temperature, Annealing temperature v/s cold-worked and recovered grains, Direction of grain boundary motion, time v/s grain diameter
Module-5
Steels and cast irons Ferrous alloys, steels – low medium and high carbon, AISI designation steels, Cast irons – types and properties Composites and ceramics Composite materials: Definition, classification, Types of matrix materials & reinforcements, Application of composites, Ceramics: Glasses, Glass – ceramics, clay products, Refractories, abrasives and cements.
Course Outcomes:
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
Question paper pattern:
- The question paper will have ten full questions carrying equal marks.
- Each full question will be for 20 marks.
- There will be two full questions (with a maximum of four sub- questions) from each module.
- Each full question will have sub- question covering all the topics under a module.
- The students will have to answer five full questions, selecting one full question from each module.
Textbook:
- An Introduction -Material’s Science and Engineering, William D Callister, John Wiley and Sons India Pvt Ltd. 6th Edition, 2006 New Delhi
- Foundation of Material Science and Engineering Smith McGraw Hill 3rd Edition, 1997
Reference Books:
For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier..
For detail Syllabus of all other subjects of BE 4th Sem Industrial & Production Engineering, visit (IPE) 4th Sem Syllabus Subjects.
For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results direct links.