4th Sem, EEE

18EE42: Power Generation and Economics EEE Syllabus for BE 4th Sem 2018 Scheme VTU

Power Generation and Economics detailed Syllabus for Electrical & Electronics Engineering (EEE), 2018 scheme has been taken from the VTUs official website and presented for the VTU students. For Course Code, Subject Names, Teaching Department, Paper Setting Board, Theory Lectures, Tutorial, Practical/Drawing, Duration in Hours, CIE Marks, Total Marks, Credits and other information do visit full semester subjects post given below. The Syllabus PDF files can also be downloaded from the official website of the university.

For all other VTU EEE 4th Sem Syllabus for BE 2018 Scheme, do visit VTU EEE 4th Sem Syllabus for BE 2018 Scheme Subjects. The detailed Syllabus for power generation and economics is as follows.

Course Objectives:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
Get it on Google Play.

Module 1

Hydroelectric Power Plants: Hydrology, run off and stream Alow, hydrograph, flow duration curve, Mass curve, reservoir capacity, dam storage. Hydrological cycle, merits and demerits of hydroelectric power plants, Selection of site. General arrangement of hydel plant, elements of the plant, Classification of the plants based on water flow regulation, water head and type of load the plant has to supply. Water turbines-Pelton wheel, Francis, Kaplan and propeller turbines. Characteristic of water turbines Governing of turbines, selection of water turbines. Underground, small hydro and pumped storage plants. Choice of size and number of units, plant layout and auxiliaries.

Module 2

Steam Power Plants: Introduction, Efficiency of steam plants, Merits and demerits of plants, selection of site. Working of steam plant, Power plant equipment and layout, Steam turbines, Fuels and fuel handling, Fuel combustion and combustion equipment, Coal burners, Fluidized bed combustion, Combustion control, Ash handling, Dust collection, Draught systems, Feed water, Steam power plant controls, plant auxiliaries. Diesel Power Plant: Introduction, Merits and demerits, selection site, elements of diesel power plant, applications. Gas Turbine Power Plant: Introduction Merits and demerits, selection site, Fuels for gas turbines, Elements of simple gas turbine power plant, Methods of improving thermal efficiency of a simple steam power plant, Closed cycle gas turbine power plants. Comparison of gas power plant with steam

Module 3

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
Get it on Google Play.

Module 4

Substations: Introduction to Substation equipment; Transformers, High Voltage Fuses, High Voltage Circuit Breakers and Protective Relaying, High Voltage Disconnect Switches, Lightning Arresters, High Voltage Insulators and Conductors, Voltage Regulators, Storage Batteries, Reactors, Capacitors, Measuring Instruments, and power line carrier communication equipment. Classification of substations-indoor and outdoor, Selection of site for substation, Bus-bar arrangement schemes and single line diagrams of substations.

  • Substations (continued): Interconnection of power stations. Introduction to gas insulated substation, Advantages and economics of Gas insulated substation. Grounding: Introduction, Difference between grounded and ungrounded system. System grounding-ungrounded, solid grounding, resistance grounding, reactance grounding, resonant grounding. Earthing transformer. Neutral grounding and neutral grounding transformer.

Module 5

Economics: Introduction, Effect of variable load on power system, classification of costs, Cost analysis. Interest and Depreciation, Methods of determination of depreciation, Economics of Power generation, different terms considered for power plants and their significance, load sharing. Choice of size and number of generating plants. Tariffs, objective, factors affecting the tariff, types. Types of consumers and their tariff. Power factor, disadvantages, causes, methods of improving power factor, Advantages of improved power factor, economics of power factor improvement and comparison of methods of improving the power factor. Choice of equipment.

Course Outcomes:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
Get it on Google Play.

Question paper pattern:

  • The question paper will have ten questions.
  • Each full question is for 20 marks.
  • There will be 2 full questions (with a maximum of three sub questions in one full question) from each module.
  • Each full question with sub questions will cover the contents under a module.
  • Students will have to answer 5 full questions, selecting one full question from each module.

Text Books:

  1. Power Plant Engineering P.K. Nag McGrawHill 4th Edition, 2014
  2. Generation of Electrical Energy B.R.Gupta S. Chand 2015
  3. Electrical power Generation, Transmission and Distribution S.N. Singh PHI 2nd Edition, 2009

Reference Books:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
Get it on Google Play.

For detail Syllabus of all other subjects of BE 4th Sem Electrical & Electronics Engineering, visit (EEE) 4th Sem Syllabus Subjects.

For all (CBSE & Non-CBSC) BE results, visit VTU BE all semester results direct links.

Leave a Reply

Your email address will not be published. Required fields are marked *

*