15WT43P: Hydraulics and Plumbing Lab Water Tech 4th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Hydraulics and Plumbing Lab detail DTE Kar Diploma syllabus for Water Technology And Health Science (WH), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15WT43P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other water tech 4th sem syllabus for diploma c15 scheme dte karnataka you can visit Water Tech 4th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for hydraulics and plumbing lab is as follows.

Pre-requisites:

Knowledge Hydraulics and Plumbing fixtures

Course Objectives:

1. Exposure to the principles of Hydraulics in flow measurements.
2. Ability to critically observe/ examine and Measure the discharges through flow measuring devices.
3. Ability to understand the working principles of pumps
4. Know the various fixtures used in plumbing operation

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

LIST OF GRADED PRACTICAL EXERCISES

Following is the list of experiments to be carried out.

A. HYDRAULICS LAB

1. Identification with the equipments used in hydraulics lab 03
2. Use of manometer and piezometer 03
3. Determination of frictional losses in a pipe 03
4. Determination of co-efficient of discharge using venturimeter 03
5. determination of co-efficient of discharge using Orificemeter (Horizontal type) 03
6. determination of co-efficient of discharge using Orificemeter (Vertical type) 03
7. Determination of co-efficient of discharge using V- Notch 03
8. Determination of co-efficient of discharge using Rectangular notch 03
9. Determination of co-efficient of discharge using Trapezoidal Notch 03
10. Determination of co-efficient of discharge using Impact of jet on Vanes 03
11. Demonstrating the working of Centrifugal pumps 03
12. Demonstrating the working of Reciprocating pumps 03

B. PL LUMBING LAB

1. Identifying pipe fittings used in water supply (With actual models displayed on board ) 03
2. Cutting, Threading and Joining of GI pipes/ Cutting and joining of PVC pipes using solvents 06
3. Study of working of water meter 03
4. Identification and study on bore-well fittings 03
5. Study of bathroom fittings connection from an existing water supply main (Listing the materials required, drawing a neat sketch of the connection with details) 06
6. Making suction and delivery pipe connections to a centrifugal pump 06

(making indents, drawing a neat sketch of the connection with details.

7. Identification and study on pumps used in wells 03
8. Variation in the discharge rate in a sump tank and OHT (Delivery head, Suction head and Pressure head concept) 06

Reference Books:

1. Hydraulic Lab Manual Compiled – T.T.T.I. – Chennai – 113.
2. Ghosh and Talapohia – Experimental Hydraulic – Khanna Publishers – New Delhi
3. Central Public Health Engg Organisation(CPHEO) water supply Manual
4. National environmental engineering Institute (NEERI) water supply manual
5. Water supply engineering by-Birdie
6. Water supply and sewage disposal by – S.K.Garg

Suggested List of Student Activities:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Course Delivery:

The course will be delivered through Demonstration and practices

Note to IA verifier:

Thken foowllloewdigneg documents to be verified by CIE verifier at the end of semester

1. Blue books (10 marks)
2. Student suggested activities report for 5 marks
3. Student feedback on course regarding Effectiveness of Delivery of instructions & Assessment Methods.

Scheme of Valuation for End Examination

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

EQUIPMENT LIST:

LIST OF EQUIPMENTS REQUIRED HYDRAULICS LAB

1. Apparatus to verify Bernoulli’s Theorem – 1 set
2. Apparatus for determining co-efficient of discharge Venturimeter – 1 set and Orifice meter
3. Apparatus for determining co-efficient of discharge of Orifice – 1set
4. Apparatus for determining the Pipe Friction – 1 set
5. Apparatus for determining co-efficient of discharge of – 1 set Rectangular/ V Notch
6. Centrifugal Pump Test Rig – 1 set
7. Recifrocating pump Test Rig-1 set

LIST OF EQUIPMENTS REQUIRED FOR PLUMBING LAB

1. Pipe fitting Display board (GI/PVC) – Consisting of all Fittings, Pipes, Specials & Valves of different sizes in sufficient quantity. – 1 No.
2. Tools required for Cutting, Threading and Making Bath room connection & Suction and Delivery Pipe Connections –
• Pipe Vice : Size 50 mm
• Chain Pipe Vice
• Bench Vice : Size 100 mm / 150mm
• Pipe Die sets of sizes ^” to 2″
• Adjustable Hacksaw frame with Blades 10″ or 12″
• Three wheel pipe cutter 2″
• Pipe wrench 12″, 14″, 18″ & 24″
• GI pipes with Specials of different sizes in sufficient quantity
• PVC pipes with Specials of different sizes in sufficient quantity
• Water Meter

For detail syllabus of all other subjects of BE Water Tech, C15 scheme do visit Water Tech 4th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.