15WT42T: Automatism and Electrotechnic Water Tech 4th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Automatism and Electrotechnic detail DTE Kar Diploma syllabus for Water Technology And Health Science (WH), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15WT42T), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other water tech 4th sem syllabus for diploma c15 scheme dte karnataka you can visit Water Tech 4th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for automatism and electrotechnic is as follows.

Pre-requisites:

Mathematics and science secondary education

Course Objectives:

1. To introduce concept of electrical energy with the knowledge of electric current, voltage, power, energy and electrical circuits.
2. To know the importance of electric machines, safety devices, control of motors, plc working, principles of feedback control loop.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT I: CONCEPTS OF ELECTRICAL ENERGY 10 Hrs

Introduction: Sources of electrical energy, advantages of electrical energy, effects of current and its applications.

Electric current, voltage and circuits: Electric current and its unit, instruments used for measurement of current, emf, potential difference and its unit, instrument used to measure voltage, open circuit, closed circuit and short circuit, concepts of conductor, insulator and semiconductor, resistance and its unit, meter used to measure resistance, ohms law and its application, simple problems.

Work, power and energy: Mechanical power, energy, work and their units, measurement of power and energy, conversion of mechanical units into electrical units and vice versa, electric power, energy, work and their units, simple problems.

UNITII: AC CIRCUITS AND ELECTRICAL MACHINES 08 Hrs

Alternating current and circuits: Concepts of alternating current, definition of terms- amplitude, instantaneous value, time period, cycle, frequency, r m s value, average value, form factor and their units, inductance, capacitance, reactance, impedance and their units, power and power factor, simple problems.

Electric machines: DC Generator-function, types, applications, AC generators- function, types, applications, AC motors-function, types, applications, difference between 1ph and 3ph motors, necessity of starters, mention the types of starters.

UNITIII: ELECTRIC CABLES AND PROTECTIVE DEVICES 06Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV: AUTOMATED SYSTEMS 08Hrs

Automated systems: Contactors, Definition of automated system, objectives of automation, organization and operation of automated system, activities of automation specialist.

Sensors: Definition of a sensor, digital sensors or detectors, analog sensors or transmitter sensors

Electronic control of induction motor: Solid state switches, rectifiers, inverters, phase angle modulators, electronic soft starter, speed controller, water industries applications.

UNIT V: BINARY LOGIC AND PLC 10Hrs

Binary logic elements: Example of system with binary logic, Logic gates-NOT, AND, OR, NAND, NOR, applications of ICs.

PLC: Introduction, types of PLC, working, wiring of PLC, controlling a motor using PLC.

Sequential function chart: Introduction, principles of SFC, Industrial example, different structures of SFC-alternative & parallel structure, counting, delaying, applications.

UNIT VI: FEEDBACK CONTROL LOOP 10Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Text Books:

1. Automatism and Electrotechnic LESSONS by Pascal Meilleur & Sylvain Vuillard 2011
2. Basic electrical and electronics engineering by V.Jegathesan,K.Vinoth Kumar and R.Saravakumar Wiley India pvt.ltd

Reference Books:

1. Basic electrical and electronics engineering by B.L Theraja S.Chand publications.
2. Basic electrical engineering by V.K Mehtha & Rohit mehtha S.Chand publications

LIST OF SOFTWARE/LEARNING WEBSITES

1. http://www.fascstaff.bucknell.edu
2. http://electrical4u.com/
3. http://www.electronics-tutorials
4. en.wikipedia.org/wiki/contactor
5. en.wikipedia.org/wiki/Programmable_logic_contoller

Suggested List of Student Activities:

Note: the following activities or similar activities for assessing CIE (IA) for 5 marks (Any one)

1. Visit to nearby hydroelectric power plant and understand electric power generation
2. Make a circuit, Observe and identify the AC quantities using CRO
3. Visit nearby industries and list the applications of different Electrical machines.
4. Power point presentation on automated systems.
5. Collect the information and working principles of different types of PLCs used in industries.
6. Conduct a market survey and prepare a report on commercially available cables used for various purposes.
7. Conduct a market survey and prepare a report on commercially available protective devices used for various purposes.
8. Conduct a market survey and prepare a report on commercially available electronic control of motor used for various purposes.
9. Identify and prepare a report on use of sensors in a water treatment plant.
10. Study and prepare a report on SCADA system of an Water treatment plant

Course Delivery:

• The course will be delivered through Lectures, Classroom interaction, Group Discussion, Exercises and Assignments.

Note to IA verifier:

The following documents to be verified by CIE verifier at the end of semester

1. Blue books( 20 marks)
2. Student suggested activities report for 5 marks
3. Student feedback on course regarding Effectiveness of Delivery of instructions & Assessment Methods.

Model Question Paper:

(CIE)

1. Define the rms value and average value with their equations.
2. A circuit consists of a resistance of 10ohm and an inductance of 0.2 Henry. Find inductive reactance and impedance of the circuit at 50Hz.
3. What are the applications of ohms law. OR A lamp has a resistance of 400ohms. It is connected to a 230V supply. Determine the energy consumed, when used for 3hrs a day, during the month of Feb 1992.
4. Draw open circuit, closed circuit and short circuit? OR What are the differences between 1ph and 3ph circuits?

Model Question Paper:

(SEE)

PART-A(Each questions carries 5 marks)

1. State the sources of electrical energy.
2. State and explain ohms law.
3. Define electric current and potential difference along with their units
4. What are open circuit, closed circuit and short circuit?
5. Define electrical power and energy with their units.
6. Define the following terms along with sine waveform.
1. Amplitude
2. Time period
3. Cycle
4. Frequency
7. Define the term automated system and mention objectives of automation.
8. Compare OH lines with UG cables.
9. Explain working of contactor.

PART-B(Each questions carries 10 marks)

1. Two bulbs of 100watts each are connected in series across a 230V supply. Find monthly consumption charges @ 1.20 per unit. 5
2. Explain with neat diagram pipe Earthing. 5
1. A series circuit consists of a resistance of 20ohms,an inductance of 0.5 Henry & a capacitance of 50micro farad. If this is connected to a 250 V,50 HZ supply, Find
1. Inductive reactance
2. Capacitive reactance. 5
2. Draw and explain DC generator. 5
1. Define digital sensors & analog sensors. 5
2. Explain electronic soft starter with neat sketch. 5
1. Explain a full wave rectifies circuit. 5
2. What are solid state switches? Mention the different types. 5
1. Explain controlling of motor using PLC. 5
2. Explain the speed controller of induction motor using PWM. 5
1. Write the truth table and symbol for the following logic gates
1. NOT
2. AND
3. OR
4. NAND
5. NOR 5
2. List the applications of ICs. 5
1. Explain the working of PLC 5
2. Explain the principle of SFC. 5
1. Explain the different structures of SFC. 5
2. Explain open loop feedback control loop with block diagram. 5
1. Explain PID control algorithm. 5
2. Explain static characteristics. 5
10. Explain dynamic behavior study in case of stable and unstable process. 10

For detail syllabus of all other subjects of BE Water Tech, C15 scheme do visit Water Tech 4th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.