15WS66P: Project Work-II Mechanical WS 6th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Project Work-II detail DTE Kar Diploma syllabus for Mechanical Engineering (Welding & Sheet Metal) (WS), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15WS66P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mechanical ws 6th sem syllabus for diploma c15 scheme dte karnataka you can visit Mechanical WS 6th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for project work-ii is as follows.

Pre-requisites:

Application learned concepts form the previous semester studied courses.

Course Objectives:

1. Learn the objective of this project is to provide opportunity for the students to implement their skills acquired in the previous semesters to practical problems/problems faced by industry/development of new facilities
2. Make the students come up with innovative/ new ideas in his area of interest.
3. Identify, analyze and develop opportunities as well as to solve broadly defined mechanical Engineering problems
4. Enhance students’ appreciation of the values of social responsibility, legal and ethical principles, through the analysis and discussion of relevant articles and real time projects

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

1. PROJECT WORK: 78 HRS

A. INTRODUCTION

The objective of the project work is to enable the students in convenient groups of minimum of 5 members on a project involving theoretical and experimental studies related to the branch of study. Every project work shall have a guide who is the member of the faculty of the institution. Six periods per week shall be allotted in the time table and this time shall be utilized by the students to receive the directions from the guide, on library reading, laboratory work, computer analysis or field work as assigned by the guide and also to present in periodical seminars on the progress made in the project.

B. ROAD MAP FOR THE PROJECT

1. Carry out a sessionor a seminar from the ISTEStudent Chapter coordinator / Programme coordinator with the help of Innovation club / I II cell for directing the students to identify project areas in the field of their interested including interdisciplinary areas.
2. Power point presentation in seminar should include detail description of project areas related to program, Project report formats, developing personnel writing skills.
3. The Students/Departments may at libertyto form the batch not less than 5 and maximum 8 and get registered with project coordinator/HODat the end of V semester.
4. Students should take the approval from the Project committee/ Head of department fordoing project.
5. After approval the batch of students will be published in department notice boardalong withguidein the end of5th semester.
6. All students should finalize their Project immediately before commencement of SEE of 5th semester.
7. The types of project may include:
• Industrial case study
• Preparation of a feasibility report
• Design and development of equipment.
• The overhauling of existing equipment
• Creation of New facilities
8. The project should be challenging but manageable within the resources and time available.
9. Students should undergo reviews for one times in5th and one times in6th semester during the internal assessment. Time table for IA should include project review. The guide should monitor the progress of Project work periodically and it should be finally evaluated for 25 marks at the end of 5th semester and for25 marks at the end of 6th semester.

C. Thrust areas identified for Project work

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

E. Project report

The Project Report should consist of following items.

1. Introduction
2. Review of Literature
3. Study Area
4. Methodology/Design/fabrication/Tests
5. Result and Discussion
6. Conclusion and scope for future study
7. References.

1. Project reports should be typed neatly in Times New Roman letters with font size 14 for titles and 12 for text on both sides of the paper with 1.5 line spacing on a A4 size paper (210 x 297 mm). The margins should be: Left – 1.5″, Right – 1″, Top and Bottom – 0.75″.
2. The total number of reports (Soft bound) to be prepared are
1. One copy to the department /library
2. One copy to the concerned guide
3. One copy to the candidate.
3. Before taking the final printout, the approval of the concerned guide is mandatory and suggested corrections, if any, must be incorporated.
4. Every copy of the report must contain
1. Inner title page (White)
2. Outer title page with a plastic cover
3. Candidate declaration and Certificate in the format enclosed both from the institution and the organization where the project is carried out.
4. An abstract (synopsis) not exceeding 100 words, indicating salient features of the work.
5. The organization of the report should be as follows
1. Inner title page
2. Abstract or Synopsis
3. Acknowledgments
4. Table of Contents
5. List of table & figures (optional)

Chapters(to be numbered in Arabic) containing Introduction-, which usually specifies the scope of work and its importance and relation to previous work and the present developments, Main body of the report divided appropriately into chapters, sections and subsections.
The chapters, sections and subsections may be numbered in the decimal form for e.g. Chapter 2, sections as 2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.
The chapter must be left or right justified (font size 16). Followed by the title of chapter centered (font size 18), section/subsection numbers along with their headings must be left justified with section number and its heading in font size 16 and subsection and its heading in font size 14 The body or the text of the report should have font size 12
The figures and tables must be numbered chapter wise
The last chapter should contain the summary of the work carried, contributions if any, their utility along with the scope for further work. Reference or Bibliography: The references should be numbered serially in the order of their occurrence in the text and their numbers should be indicated within square brackets for e.g. [3]. The section on references should list them in serial order in the following format.

1. For textbooks – Dr.Paramar S, Welding process and technology, Khanna publishers, New Delhi, 2 Edition, 2003.
2. For papers – Y.Javadi and I.sattari, Welding distortion in pipes, Journal of pressure vessels and piping, Vol 85, Aug 2008, pp 337-343

Only SI units are to be used in the report. Important equations must be numbered in decimal form.
All equation numbers should be right justified.
Separator sheets, used if any, between chapters, should be of thin paper

F.CIEASSESSMENTFOR FINAL REVIEW(VI semester)

1. Relevance of the subject in the present context 05 marks
2. Literature Review 05 marks
3. Plan and schedule of Fabrication of the model/Data collection/repair and Overhauling work/creation 10 marks
4. Results & Discussion 05 mark
5. Marks

G SEEASSESSMENT:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

APPENDIX 1 (Cover page)

Follow from pdf.

APPENDIX 6

Format of Synopsis

1. Title of the Project
2. Objectives of the study
3. Rationale for the study
4. Statement of the Problem
5. Detailed Methodology to be used for carrying out the study
6. The expected contribution from the study (to perform any laboratory experiments)
7. List of activities to be carried out to complete the project (with the help of a bar chart showing the time schedule)
8. Places/labs/equipment and tools required and planning of arrangements
9. Problems envisaged in carrying out the project, if any.
10. Brief description of project in 100 words

APPENDIX-7(PROJECT-TIME LINE)

Follow from pdf.

For detail syllabus of all other subjects of BE Mechanical Ws, C15 scheme do visit Mechanical Ws 6th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.