15WS12P: Basic Workshop-I (Carpentry & Fitting) Mechanical WS 1st Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Basic Workshop-I (Carpentry & Fitting) detail DTE Kar Diploma syllabus for Mechanical Engineering (Welding & Sheet Metal) (WS), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15WS12P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other mechanical ws 1st sem syllabus for diploma c15 scheme dte karnataka you can visit Mechanical WS 1st Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for basic workshop-i (carpentry & fitting) is as follows.

Pre-requisites:

NIL

Course Objectives:

1. Students able to understand different tool &equipments for work shop practice.
2. Students acquire skills for the preparation of different Carpentry/fitting models. 3.Students able to Understand the safety precaution in the workshop 4.Student acquire skills of Application orientated tasks.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

I CARPENTRY PRACTICES: CONTACT HOURS—-39

Study of the joints in roofs, doors, windows and furniture available in Polytechnic

Hands-on-exercise:

1. Demonstration of different wood working machines/ Power Tools of different wood working process, like planning, marking, Chiseling, Grooving, turning of wood etc.
2. Exercise on One simple Wood work joints like half lap joint, Mortise and tennon, dovetail joint and Bridle joint by sawing, planning and cutting.
3. Measure quantity of wood required for a given task.

II. FITTING SHOP:CONTACT HOURS—-39

Hands-on-exercise

1. Demonstration of different fitting tools and drilling machines and power tool
2. Demonstration of different operations like chipping, filing, drilling, tapping, cutting, etc.
3. Exercise on One simple fitting job involving practice of chipping, filing, drilling, tapping, cutting etc.
4. Making of male and female gauges with V joint, rectangular joint and semi circular joint
5. Prepare utility articles like screw drivers, hinges, hexagonal nut.
6. Measure quantity of metal required for a given task

Note: FOR PRACTICAL CLASSES BATCH STRENGTH IS LIMITED TO 15 TO 20

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

SUGGESTED LIST OF STUDENT ACTIVITYS

1. Ask the students to observe the different Carpentry/fitting model operations carried out in local vicinity

Course Delivery:

The course will be delivered through Demonstration and Shop practices

Note: FOR PRACTICAL CLASSES BATCH STRENGTH IS LIMITED TO 15 TO 20

SCHEME OF VALUATION

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Tools-Fitter Section

1. Flat file 14″ rough bastard file 20
2. Try square 6″ 20
3. Triangular file 10″ rough 20
4. Half round file 10″ rough 20
5. Hack saw frame solid 12″ 20
6. Center punch 20
7. Ball peen hammer 11/2 Lbs 20
8. Flat chisel 6″ 20
9. Smooth file 10″ flat 20
10. Bench vice 8″ 20
11. Leg vice 6″ 10
12. Power hack saw 01
13. Bench grinding 01
14. Bench drilling machine up to 12mm cap 01
15. Drill bit up to 12mm straight shunk 04
16. Tap set and die set up to 1″ 01
17. Vernier caliper 10
18. Spring divider 20
19. Steel scale 20
20. Vernier height gauge 01
21. Surface plate 2×3 feet 02
22. Number punch 01
23. Anvil 20
24. V block 02

Tools required for -Carpentry

1. Carpenter bench vice 20
2. G or C clamp 6″ 20
3. Marking gauge 20
4. Try square 19mmx4″ 20
5. Wooden mallet 20
6. Firmer chisel 2″ 20
7. Firmer chisel 3/4″ 20
8. Mortise chisel 1/2″ 20
9. Metal jack plane 9″ 20
10. Beveled square 6″ 20
11. Hand saw or cross cut saw 20
12. Steel scale 12″ 20

MODEL QUESTIONS FOR PRACTICE AND SEMESTER END EXAMINATION

Follow fromp pdf.

MODEL QUESTIONS FOR VIVA VOCE

CARPENTRY SHOP

1. Differentiate between soft wood and hard wood.
2. Give the list of the common names of timber suitable for carpentry work.
3. Describe the term plywood. How it is obtained as large size sheets.
4. What are the marking tools used in wood working.
5. What is meant by marking gauge. How it is used for marking.
6. Give a list of the saws used for cutting wood.
7. What is cross cut saw and tenon saw.
8. What are the types of chisels used for wood working.
9. What is meant by mallet. What is the use of mallet.
10. Give the list of the plaining tools used in carpentry shops.
11. Describe briefly the construction of use of a wooden jack plane.
12. Name the types of work holding devices used for carpentry work.
13. Explain the use of bench vice.
14. Describe the working principle of band saw and circular saw.
15. What are the common defects in timber.
16. Mention the important carpentry tools.
17. What are the marking and measuring tools used in carpentry.
18. Mention the different types of saws and explain.
19. Whatis spoke shave.
20. What is boringtools.And its uses.
21. What are the striking tools and its uses.
22. What are the holding tools and its uses.
23. What is uses of the Rasps and Pincer
24. What are the carpentry process used in wooden construction.
25. Mentionthetypes carpentry joints

FITTING SHOP

1. Give a list of types of tools used in fitting operations.
2. Explain the types of work holding devices used in fitting.
3. Describe briefly the types of files used in fitting.
4. Explain the construction of a hack saw.
5. what are the types of cold chisels and for what purposes they are used.
6. Describe briefly the types of hammers used.
7. Define the term twist drill, distinguish a drill from a reamer.
8. What is a surface plate. For what purpose it is used.
9. What are the types of tools used for marking.
10. Explain the use of steel rule and a vernier caliper.
11. Explain the use of the different types of inside and outside calipers.
12. What is the use of combination set.
13. Describe how a micrometer is used for measuring a size.
14. Mention the commonly used in bench and fitting work.
15. Name the parts of a hand hammer.
16. What are the classification of hammers.
17. What is the use of the flat, cross-cut, half round , diamond point, side chisels.
18. what is chipping.
19. Name the different parts of a file.
20. what is single cut and double cut of a file.
21. Mention the most commonly used shapes in files.
22. What is filing and mention the method of filing.
23. What is cross filing, straight filing and draw filing
24. What is scraper and mention types of scraper.
25. What is the use of hacksaw and mention its types.
26. Mention the tools used for making.
27. What are the uses of Surface plate, Scriber, Punch, V-block, Angle plate, and trysquare.

For detail syllabus of all other subjects of BE Mechanical Ws, C15 scheme do visit Mechanical Ws 1st Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.