15TD53B: Hydraulics and Pneumatics Tool and Die 5th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Hydraulics and Pneumatics detail syllabus for Tool And Die Making (84), C15 scheme is taken from DTE Karnataka official website and presented for diploma students. The course code (15TD53B), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below.

For all other tool and die 5th sem syllabus for diploma c15 scheme dte karnataka you can visit Tool and Die 5th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. For all other ELECTIVE -I subjects do refer to ELECTIVE -I. The detail syllabus for hydraulics and pneumatics is as follows.

Pre-requisites:

Knowledge of basic mathematics and Applied Science

Course Objectives:

To gain knowledge on the fundamental elements of fluid power and properties of fluid, understand fluid power and differentiate hydraulic and pneumatic systems for their application in industry.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNITI: INTRODUCTION TO FLUID POWER 08Hrs

Fluid Power introduction, Basic law-Pascal’s law Continuity equation, simple problems on pascal’s law Introduction to conversion of units, Application and Advantages of fluid power, Introduction on hydraulic power and pneumatic power, Comparison of Hydraulics and Pneumatics, systems.

UNITII: PROERTIES OF FLUIDS 06Hrs

Properties of fluid, Types of fluid, Properties of fluid – viscosity, viscosity index Density, Demulsibility, oxidation resistance, Compressibility, Incompressibility, problem caused by gases in fluids, Why oil is used instead of water in a hydraulic system

UNITIII: COMPRESSED AIR 08Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV: FILTERS & SEALERS 10Hrs

Introduction on filters and sealers, Mechanical filters, Absorbent filters, Adsorbent filters, full flow filters, proportional filters, filter symbols, Filter location, Strainers, seaing devices, static seals, dynamic seals, types of seals, O ring, compression packings, piston cup packing and piston rings.

UNIT V: HYDRAULIC SYSTEM 10Hrs

Hydraulic systems- layout of oil hydraulic systems-. Advantages of hydraulic systems-Components of Hydraulic systems- Pumps- Vane pump, gear pump, screw pump,-Valves -working and symbols of Pressure control valves – pressure relief valve, Direction control valves – 3/2, 5/2 valves,-Sequence valves.-Flow control valves-Actuators- Linear Actuators – Cylinders – single acting, double acting – Hydraulic motors-Accumulators-Types.

UNIT VI: PNEUMATIC SYSTEM 10Hrs

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Text Books:

1. Bansal. R.K.,”Fluid Mechanics and Hydraulics Machines”, 9th Edition, LaxmiPublicationsPrivate Limited, New Delhi. 2011.
2. R.S.Khurmi, “Fluid Mechanics and Machinery”,S.Chand and Company, 2nd Edition, 2007.
3. Hydraulics & Pneumatics – Andrew Parr, Jaico Publishing House New Delhi.
4. Hydraulic and Pneumatic Controls Understanding Made Easy- K.S.Sundaram,-S.chand Company Delhi

Reference Books:

1. Ramamritham. S, “Fluid Mechanics, Hydraulics and Fluid Machines”, DhanpatRai&Sons,Delhi, 2004. Machines”, 19th Edition, Standard Book House, 2013
2. Bansal R. K, “Strength of Materials”,Laxmi Publications, New Delhi, 2012.
3. Oil Hydraulic Systems- Majumdar, S.R. -Tata McGraw-Hill Publication, 3/e, 2013
4. Hydraulic and Pneumatic Controls- Srinivasan, R.- Vijay Nicole Imprints Private Limited, 2/e, 2008
5. Pneumatic And Pneumatics
6. Fluid mechanics and hydraulics – Jagadish lal

LIST OF SOFTWARES/ LEARNING WEBSITES:

1. http://www.automationstudio.com/
2. http://www.howstuffworks.com/search.php?terms=hydraulics
3. http://hyperphvsics.phv-astr.gsu.edu/hbase/fluid.html#flucon
4. http://www.youtube.com/watch?v=FVR7AC8ExIM
5. http://www.youtube.com/watch?v=iOXRoYHdCV0
6. http://www.youtube.com/watch?v=qDinpuq4T0U
7. http://www.youtube.com/watch?v=xxoAm3X4iw0

SPECIAL INSTRUCTIONAL STRATEGIES

1. INTRODUCTION TO HYDRAULIC & PNEUMATICS Video/ Lectures
2. PROPERTIES OF FLUID Presentations, Video clips
3. COMPRESSED AIR Presentations, Video movies.
4. FILTERS AND SEALERS Presentations, Showing charts, Video movies. Industrial Visits
5. HYDRAULIC SYSTEM Lectures/Presentations. Video movies. Animations
6. PNEUMATIC SYSTEM Lectures/ Presentations, Videos on pneumatic system processes. Animations

Course Delivery:

• The course will be delivered through lectures and Power point presentations/ Video

Suggested List of Student Activities:

Note: the following activities or similar activities for assessing CIE (IA) for 5 marks (Any one)

1. Each student should do any one of the following type activity or similar activity related to the course and before take up, get it approved from concerned Teacher and HOD.
2. Each student should conduct different activity and no repeating should occur

1. Each student will give an activity to prepare a tabulated summary for types of fluid which is available around city (Summary includes properties of fluid)
2. List out any five pressure measuring devices available in market with its specifications and current market price.
3. Visit a nearby related Earth moving equipments and prepare a summary of hydropneumatic devices used along with their specifications

Note to IA verifier:

The following documents to be verified by CIE verifier at the end of semester

1. Blue books ( 20 marks)
2. Student suggested activities report for 5 marks evaluated
3. Student feedback on course regarding Effectiveness of Delivery of instructions & Assessment Methods.

Model Question Paper:

(CIE)

1. Define fluid power.
2. Explain the phenomenon of capillary tube.
3. Explain with a neat sketch Simple monometer. Or Write different advantages and disadvantages of hydraulic system.

Note: Internal choice may be given in each CO at the same cognitive level (CL).

Model Question Paper:

Part A 6×5=30 marks

1. Define fluid power.
2. State Pascal’s law. Explain with the help of Pascal’s law and schematic example How force can be amplified in a fluid power system?
3. List the different types of fluid.
4. State the applications of Hydraulics system.
5. Define viscosity index.
6. Classify compressors, Sketch diaphragm compressor.
7. Explain the general layout of pneumatic system.
8. If a force of 80KN is applied at the input cylinder of a hydraulic press, what distance should the input cylinder, having a diameter of 50mm be moved? The operation needs the place to be moved by 200mm. The output cylinder has radius 10mmCalculate the force at the output cylinder.
9. Differentiate between hydraulic and pneumatic system

Part-B

1. Write the difference between reciprocating compressor and rotary compressor
2. Write short on air motors.
3. Explain with neat sketch, the double-acting cylinder.
4. Sketch and explain the Vane type motor.
1. Sketch and explain the spring loaded Accumulator.
5. Classify of control valves.
1. Sketch and explain the 5/2 DC valve.
6. Illustrate the relationship between Diaphragm compressor and rotary compressor.
7. Explain with neat sketch the working of multistage pump for high head
8. Explain with a simple neat sketch the construction of full flow filter.
1. Explain briefly FRL unit.
9. Distinguish between:
1. Steady flow and unsteady flow
2. Uniform and non uniform flow
3. Compressible and incompressible flow
10. write the methods of filtering and their advantages

For detail syllabus of all other subjects of BE Tool And Die, C15 regulation do visit Tool And Die 5 syllabus for C15 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.