Metrology Lab detail DTE Kar Diploma syllabus for Tool And Die Making (TD), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15TD37P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.
For all other tool and die 3rd sem syllabus for diploma c15 scheme dte karnataka you can visit Tool and Die 3rd Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for metrology lab is as follows.
Pre-requisites:
Basic science, Applied Mathematics and basics of metrology
Course Objectives:
- Understand the working principle of metrology and measuring equipments.
- Evaluate and analyze the components by using standard measuring equipments
Course Outcomes:
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.
Following list of experiments to be carried out.
- Introduction to metrology and measuring equipments 3 CO1
- Determine the dimensions of given component by using Vernier caliper.
- Determine the dimensions of given component by using Micrometer. 6 CO2
- Determine the dimensions of given component by using Vernier height gauge 6
- Determine the depth of given component by using Vernier depth gauge 3
- Use of slip gauges, their accuracy and wringing of slip gauges to given dimensions
- Construct slip gauge combination for a given dimension. 6 CO3
- Determine the internal dimensions of given components by using bore gauge. 3
- Determine the pitch of the thread by using thread pitch gauge and use of GO , NO-GO plug gauges 6
- Determine concentricity of the given component by using dial gauge, magnetic stand and V block 3
- Determine the angle of the given component by using sine bar.
- Determine the runout between centers by using bench centre. 6 CO4
- Determine center, squareness and angle of the component by using combination set 6
- Determine the angle of component by using universal bevel protractor. 3
- Determine the hardness on Rockwell hardness c-scale testing machine. 9 CO5
- Determine job run out on lathe using magnetic stand and dial indicator. 6 CO6
- Determine dimensions of component by using coordinate measuring machine 6
- Determine dimensions of component by using profile projector 6
Scheme of Valuation for End Examination
- Writing procedure (Two experiments) 05+05=10
- Conducting of Experiment 10+05=15
- Calculation, results, Interference (Both experiments) 10+10=20
- Viva 05
Equipment List:
For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.
Model Question Paper:
VIVA QUESTIONS
- Define least count of a vernier caliper
- Define least count of the micro meter
- Define error in micro meter
- Demonstrate the process of measuring depth by vernier depth gauge
- Describe slip gauges
- Define process ringing two slip gauges
- Construct the slip gauge combination for a given dimension
- What is the use of bore indicator
- Explain the use of pitch gauge
- Describe Go and NO-GO Gauges
- Describe the process of finding the concentricity of work piece on lathe
- Determine the taper angle by using sine bar
- Explain the process of finding concentricity of turned work piece on a bench centre
- Explain the use of combination set
- Determine the angular measurement by using universal bevel protractor
- Explain Rock well hardness c-scale
- Explain the advantages of coordinate measuring machine
- Illustrate the use of profile projector
For detail syllabus of all other subjects of BE Tool And Die, C15 scheme do visit Tool And Die 3rd Sem syllabus for C15 scheme.
Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.