3rd Sem, Sound Recording Diploma

15SR33T: Audio System Engineering Sound Recording 3rd Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Audio System Engineering detail DTE Kar Diploma syllabus for Sound Recording Engineering (SR), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15SR33T), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other sound recording 3rd sem syllabus for diploma c15 scheme dte karnataka you can visit Sound Recording 3rd Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for audio system engineering is as follows.

Pre-requisites:

knowledge of Basic Electronics

Course Objectives:

  1. To know designing of Resonance circuits, Equalizers and Attenuators
  2. To analyze the Different types of Filter Circuits and their characteristics
  3. Introduction to Transmission lines, different types and their characteristics
  4. Familiarize with the concepts of Power and Safety

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT1: INTRODUCTION TO NETWORKS

AC through pure R, L, C, RC, RL, RLC Networks- Analysis in series and parallel combination- Cross over Networks Network theorems -Superposition theorem and Maximum Power Transfer theorem with simple problems. (CO1)

UNIT2: RESONANCE

Definition, types, applications of resonance circuits, Series resonance and Parallel resonance: circuit diagram, phasor diagram, resonance curve, characteristics. Condition for resonance. (Derivation for frequency of resonance). Expressions for impedance, current, voltage, Q factor, power factor and bandwidth in terms of Q. Simple problems. (CO2)

UNIT: 3 FILTERS

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT: 4 ATTENUATORS

Definition, classification of attenuators, Applications of Attenuators, Definition of Bel, and Decibel. Relationship between Bel, and Decibel . Circuit diagram of symmetrical T and PI type attenuators (Only expressions, No Derivation) (CO4)

UNIT: 5 EQUALIZERS & NOISE REDUCTION SYSTEMS

Definition, Classification of Equalizers, Applications of Equalizers, Pre-equalizer, postequalizer, continuously variable equalizer, dialogue equalizer, Graphic equalizer- Active and Passive type, Methods of Reducing Noise -Study of Dolby, Noise gates, dBx (CO5)

UNIT: 6 TRANSMISSION LINES

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Reference Books:

  1. Network Lines and Fields – John D Ryder
  2. Network Analysis and Synthesis – Umesh Sinha
  3. Audio Cyclopaedia – Tremaine
  4. Modern Recording Technique 6th Edition – Huber
  5. Practical Recording Techniques 4th Edition – Bartlett
  6. Electricity for the Entertainment Electrician & Technician _ Richard Cadena (focal Press)
  7. Sound & Recording _ Francis Rumsey

LIST OF SOFTWARE/LEARNING WEBSITES

  1. https://www.youtube.com/watch?v=QXY6hAxVP4g
  2. https://www.youtube.com/watch?v=yVhMq9ADOgs

Course Delivery:

The course will be delivered through lectures and Power point presentations/ Video

Suggested List of Student Activities:

Note: the following activities or similar activities for assessing CIE (IA) for 5 marks (Any one)

  1. Each student should do any one of the following type activity or any other similar activity related to the course and before conduction, get it approved from concerned Teacher and HOD.
  2. Each student should conduct different activity and no repeating should occur
  1. Design, construct and demonstrate any resonant circuit
  2. Design, construct and demonstrate any filter circuit
  3. Design, construct and demonstrate any attenuator circuit
  4. Design, construct and demonstrate any equalizer circuit

Note to IA verifier:

The following documents to be verified by CIE verifier at the end of semester

  1. Blue books ( 20 marks)
  2. Student suggested activities report for 5 marks and should be assessed
  3. Student feedback on course regarding Effectiveness of Delivery of instructions & Assessment Methods.

Model Question Paper:

(CIE)

  1. Analyse RLC network in series
  2. State and explain Superposition theorem OR State the relevance of Maximum Power Transfer theorem with suitable circuit diagram
  3. Define resonance, mention types and its application
  4. Derive expression for frequency of resonance, Q factor, power factor and bandwidth OR Derive expressions for impedance, current, voltage.

Model Question Paper:

Part A

  1. State and explain Superposition theorem
  2. State the relevance of Maximum Power Transfer theorem with suitable circuit diagram
  3. Define resonance, mention types and its application
  4. Explain n configuration HPF with circuit diagram
  5. Explain symmetrical T type attenuator with Circuit diagram
  6. Explain dialogue equalizer
  7. Explain Noise gates
  8. Explain balanced and unbalanced lines
  9. Explain electronic balancing

Part B

    1. Analyse RLC network in series
    2. Explain Cross over Networks
  1. Problems on Superposition & Maximum Power Transfer theorem
  2. Derive expression for frequency of resonance, Q factor, power factor and bandwidth
  3. Problems on resonance
    1. Explain classification of filters
    2. Realize BPF & BRF using LPF & HPF
    1. Explain T configuration HPF with circuit diagram
    2. Problems on T and n of LPF and HPF
    1. Explain symmetrical n type attenuator with Circuit diagram
    2. Explain the classification and applications of attenuator
  4. Explain Pre-equalizer and post-equalizer
    1. Explain Passive & Active DI boxes
    2. Explain the Problems associated with 600 ohm equipment
  5. Explain Patch cords and Distribution Amplifiers

For detail syllabus of all other subjects of BE Sound Recording, C15 scheme do visit Sound Recording 3rd Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.