15PT43T: Fundamentals of Paper and Ink Printing 4th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Fundamentals of Paper and Ink detail DTE Kar Diploma syllabus for Printing Technology (PT), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15PT43T), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other printing 4th sem syllabus for diploma c15 scheme dte karnataka you can visit Printing 4th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for fundamentals of paper and ink is as follows.

Pre-requisites:

Knowledge of Chemistry and raw materials for the manufacture of paper and ink.

Course Objectives:

1. Understand the manufacturing process of paper, board, ink and their physical and chemical properties.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNITI: Composition of Paper 05Hrs

Paper: Description, Composition of paper : Raw materials for manufacturing of paper. Fibrous materials: Common paper making fibres – categories of fibres: characteristics of softwood pulps and hardwood pulps.

Pulping Process – Three basic methods of pulping process: Mechanical pulping, Mechanical / Chemical pulping and chemical pulping process

Bleaching process – Multistage Bleaching. Stock preparation – Description – Breaking: Sizing agents, Loadings, Fillers and colouring materials, Chemical additives, Refining – Description.

UNIT II: Manufacturing of Paper and Board 09Hrs

Operations in paper making machine: Wet end, Head box, Slice, Felt and wire sides, Dandy roll, press section and drying section.

Paper finishing: Super calendaring, Coating: Types of coating methods.

Board making: Raw materials for manufacturing of Board.

UNITIII:|Paper, Board – Types, Sizes and Properties 17Hrs

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT IV : Printing Inks- Composition and manufacturing 14Hrs

Raw materials used for manufacturing of printing inks – Pigments, Dyes, Vehicles, Driers Solvents, Ink, Additives.

General characteristics and requirements of printing inks.

Inks for different printing processes – Letter press inks, Flexo inks, Gravure inks, Offset inks and Screen inks.

Ink properties – Color properties, Flow properties, working properties of inks.

Ink types – Standard ink types, Specialty ink types.

UNIT V: Ink Drying and Ink Problems 07Hrs

Drying methods – Drying by Oxidation, Polymerization, Absorption, and Evaporation.

Ink problems – Mottle, Chalking, Chemical ghosting, trapping, hickeys, picking, piling, set-off, tinting, scrumming, stripping and mechanical ghosting problems – causes and remedies for this problems

Text Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Course Delivery:

• The course will be delivered through Lectures and Presentations

Suggested List of Student Activities:

Note: the following activities or similar activities for assessing CIE (I

1. for 5 marks (Any one)
2. Each student should submit any one of the following type activity or any other similar activity related to the course and before take up get it approved from concerned Teacher and HOD.
3. Each student should conduct different activity and no repeating should occur.

1. Each student will do the report on Types of Paper and Manufacture of paper.
2. Each student will do the report on fibrous raw materials and non fibrous.
3. Each student will do the report on ingredients for ink.
4. Each student will do the report on formulation of ink.

Note to IA verifier:

The following documents to be verified by CIE verifier at the end of semester

1. Blue books ( 20 marks)
2. Student suggested activities report for 5 marks
3. Student feedback on course regarding Effectiveness of Delivery of instructions & Assessment Methods.

Model Question Paper:

(CIE)

1. List the raw materials used in paper making and explain. 5 Marks
2. Explain the sizing agents used in papermaking OR Explain about mechanical wood pulp 5Marks
3. Explain the main sections of papermaking machine with neat diagram OR Describe the four distinct stages of paper manufacture. 10 Marks

Model Question Paper:

PART-A 6×5=30 marks

1. Write the characteristics of soft wood pulp and hard wood pulp.
2. Describe the multistage bleaching process.
3. Define calendaring and its purpose
4. What is the function of dandy roll in paper making
5. Write the British standard sizes of paper.
6. What are the print ability properties of paper?
7. What is dimensional stability of paper explain
8. Explain the ink characteristics for flexography inks
9. Describe ink drying by oxidation
10. What are the causes and remedies for picking

PART-B 7×10=70 marks

1. Explain about raw materials used in the manufacture of paper.
2. Explain the different methods used in pulping process.
3. Explain the various sections of papermaking machine with neat diagram.
4. List the types of coating methods, and explain any one type.
5. Explain Bursting strength and tensile strength of a paper
6. Write the ISO and British paper standard sizes
7. Explain the various raw materials used in manufacturing of printing inks.
8. Write the properties of ink in detail
9. Explain about mechanism of ink drying methods.
10. Write the causes and remedies of mottle, chalking, trapping, hickeys, and picking.

For detail syllabus of all other subjects of BE Printing, C15 scheme do visit Printing 4th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.