15PO63A: Blends and Composite Material Polymer 6th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Blends and Composite Material detail syllabus for Polymer Technology (79), C15 scheme is taken from DTE Karnataka official website and presented for diploma students. The course code (15PO63A), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below.

For all other polymer 6th sem syllabus for diploma c15 scheme dte karnataka you can visit Polymer 6th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. For all other Elective subjects do refer to Elective. The detail syllabus for blends and composite material is as follows.

Pre-requisites:

Polymer science, Physical chemistry, Organic chemistry, Polymer material, Rubber processing technology, Plastic processing technology.

Course Objectives:

1. To enhance the understanding of polymer miscibility, blend characteristics and mechanism of toughening.
2. To impart knowledge of materials and matrix systems used in polymer composites.
3. To develop understanding of processing, properties and applications of polymer composites.
4. To provide knowledge in analyzing and characterizing the composite material for various applications

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT-I: MISCIBILITY AND MORPHOLOGY(09hours)

Classification – study of polymer blends and alloys on the basis of miscibility – criteria for selection of polymer. Compatibility of blends: principles of solubility and compatibility, Compatibilizers. Thermodynamics of miscibility – mechanical compatibility – phase morphology, phase separation behavior – morphology of blends and its determinationelectron microscopy- domain structure

UNIT-II: RHEOLOGY OF POLYMER BLENDS (08 hrs)

Principles and methods involved in the preparation of different polymer blends-introduction to rheology of polymer blends – its relevance in processing – rheology – phase morphology relationships and their relevance – micro rheology – rheological models -solution, and suspension models.

UNIT-III: COMPATIBILIZATION METHODS (09hrs)

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

UNIT-IV: MATERIALS FOR POLYMER COMPOSITES (08 hrs)

Various matrix materials used in composites Glass fibres – forms or reinforcements -carbon and Kevlar fibres – inorganic fibres – polyester resins – epoxy resins – phenolic resins – other resins systems- curing of the resins – ingredients in FRP – carbon – carbon composites.

UNIT-V: PROCESSING METHOD OF COMPOSITES( 09 hrs)

Hand lay up – spray up – resin injection moulding – bulk moulding compounds -compounding of polyester machines – machinery and equipment – SMC, BMC compression and injection moulding, filament winding – pultrusion – autoclave moulding, matched die moulding – injection moulding and forming of thermoplastic composites.

UNIT VI : TESTING OF COMPOSITES(09 hrs)

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Text Books:

1. C.B. Bucknall and D. R. Paul, Polymer Blends: Volumes I and II, John Wiley and Sons, New York, 2000
2. D R. Paul and C.B. Newman, Polymer Blends Vol. I & II, Academic Press Inc,1978.
3. Polymer Blends and Alloys, Gabriel O. Shonaike and George P. Simon, editors. Marcel Dekker, 1999

e-Resources

1. https://www.youtube.com/watch2v53oKT6sv-e1k
2. https://www.Youtube.com/watch2y5O8rmvNLAMsc
3. https://www.yputube.cpm/watch2y5F153DNul8xs
4. https://www.youtube.com/watch2v5O8rmvNLAMsc
5. https://www.youtube.com/watch2v5rHxxLYzJ8Sw
6. https://www.youtube.com/watch2v5jV0ICySwhlE
7. https://www.youtube.com/watch2v50gUKG88mE0M
8. https://www.youtube.com/watch2v5Qw7eBWnYZIc
9. https://www.youtube.com/watch2v5ZW0y3WUd4qo
10. https://www.youtube.com/watch2v5WYqCnEvTRUQ
11. https://www.youtube.com/watch2v502SAIPKKYn4
12. https://www.youtube.com/watch2v5P-tg52VRzZU
13. https://www.youtube.com/watch2v5XvXrD4iuF5g
14. https://www.youtube.com/watch2v5VMH6qbED7pg
15. https://www.youtube.com/watch2v5dbywZ4PJ3QA
16. https://www.youtube.com/watch2v5lXYKKDiCroM
17. https://www.youtube.com/watch2v5FTUw0OWWMLU
18. https://www.youtube.com/watch2v5tP8JCX87DzI
19. https://www.youtube.com/watch2v5yTsXKGUdtCE

SUGGESTED LIST OF STUDENT ACTIVITYS

Note: the following activities or similar activities for assessing CIE (I

1. for 5 marks (Any one)
2. Each student should do any one of the following type activity or any other similar activity related to the course and before conduction, get it approved from concerned Teacher and HOD.
3. Each student should conduct different activity and no repeating should occur

1. Collect different polymer blends and composite videos, understand and write and Submit hand written report of 500 words
2. Visit polymer Blends/Composite industries and observe all the process parameter and testing of different materials additives and Submit hand written report of 500 words
3. Compare the product materials and specialty additives used in Blend/Composite industries and testing done on them. Submit hand written report of 500 words.
4. Analyze different polymer Blend/Composite machine in our department. And write note report of 500 words.
5. Study the test done in nearby polymer Blend/Composite industries available and collect the following information like structure, size, properties and applications, Price, handling procedures etc. The student should submit a handwritten report. Documents have to be maintained as a record.
6. Motivate student to take case study on particular activity to inculcate self and continues learning, Submit hand written report of 500 words on selected case study

Course Delivery:

The Course will be delivered through lectures, classroom interaction, animations, group discussion, exercises and assignments.

Note to IA verifier:

The following documents to be verified by CIE verifier at the end of semester

1. Blue books ( 20 marks)
2. Student suggested activities report for 5 marks evaluated.
3. Student feedback on course regarding Effectiveness of Delivery of instructions & Assessment Methods

Model Question Paper:

(CIE.

1. List some blends and explain the selecting criteria of polymers (5) OR
2. Discuss thermodynamics of miscibility of polymer blends (5)
1. Discuss briefly about phase separation in polymer blends(5) OR
2. Discus and explain compatibilizers (5)
3. List some principle methods involved in preparation of polymer blends (5)
4. Explain and discuss some rheological models. (5)

Model Question Paper:

PART-A

1. Explain compatibility of polymer blends.
2. With suitable examples explain phase separation behaviour.
3. Discuss suspension rheological model.
4. Explain relative compatibilization.
5. Illustrate briefly industrial application of polymer blend.
6. Discuss various matrix material used in composites.
7. Explain briefly SMC technique.
8. List some of the thermal behaviour of composite material.
9. Discus briefly factors affecting strength of composite material.

PART-B

1. Explain the following
1. Compatibility of blends
2. Phase morphology of blends
2. Explain the following
1. Mechanical compatibility
2. Thermodynamic of miscibility.
3. Discus the following
1. Rheology of blends
2. Micro Rheology.
4. Explain the following rheological models
1. Solution
2. Suspension
5. Explain the following
1. IPNS
2. Commercial Blends
6. Discus the following
1. Composite glass fiber
2. Composite made of epoxy resin
7. Explain the following
1. Carbon-carbon composite
2. Polyester resin in composites.
8. List the different processing methods used in composites, and explain Hand layup process and Spray up process.
9. Explain the following
1. Stress strain behavior of composite material
2. Compression test in composite.
10. Explain briefly debonding and delaminating of composite materials.

For detail syllabus of all other subjects of BE Polymer, C15 regulation do visit Polymer 6 syllabus for C15 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.