15PH41P: Soil and Mt Lab Public Health 4th Sem Syllabus for Diploma DTE Karnataka C15 Scheme

Soil and Mt Lab detail DTE Kar Diploma syllabus for Civil Engineering (Public Health Engg) (PH), C15 scheme is extracted from DTE Karnataka official website and presented for diploma students. The course code (15PH41P), and for exam duration, Teaching Hr/week, Practical Hr/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.

For all other public health 4th sem syllabus for diploma c15 scheme dte karnataka you can visit Public Health 4th Sem Syllabus for Diploma C15 Scheme DTE Karnataka Subjects. The detail syllabus for soil and mt lab is as follows.

Pre-requisites:

Knowledge of strength of materials, Materials of construction.

Course Objectives:

1. To provide the basic knowledge of science and engineering with respect to properties of construction materials and to identify problems in choosing the suitable materials in any construction site.
2. Ability to apply knowledge of Mathematics and Engineering in calculating the mechanical properties like tensile strength, compressive strength etc.
3. Ability to communicate effectively about mechanical properties of materials, and apply the knowledge in design of concrete structures, soil subgrade and pavements.
4. Understands use of modern instruments and engage in life-long learning with the advances in material testing without inhibiting professional and ethical responsibility.

Course Outcomes:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Tests on Cement as per IS code 9

1. Determination of Fineness by Surface area (Blaine air Permeability apparatus / 90 micron sieve )
2. Determination of Specific gravity
3. Normal Consistency & Setting time
4. Test on Grade of Cement (Mortar Cube )

Tests on Aggregate as per IS code 9

1. Specific gravity of Fine Aggregate and Coarse Aggregate
2. Water absorption test of Fine Aggregate and Coarse Aggregate
3. Grading analysis of Fine and Coarse Aggregates
4. Bulking of sand.
5. Bulk Density of Coarse Aggregate

Tests on cement concrete as per IS code 15

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Tests on Road Materials as per MORTH Specifications 9

1. Abrasion test on road aggregates by Los Angeles (Abrasion Testing Machine)
2. Impact test on road aggregates.

Tests on other Building Materials as per IS Code 6

1. Water absorption test & Compression test on bricks or building blocks
2. Tensile test on steel

Tests on Soils as per IS code 18

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Suggested activities

The topic should be related to the course in order to enhance his knowledge, practical skill & and lifelong learning, communication, modern tool usage.

1. Collect the information with proper justification for the fine aggregates used for different constructional activities such as foundation, plastering, concreting etc mentioning zonal classification.
2. Extraction of disturbed and undisturbed soil samples and finds field density.
3. Presentation on Strain gauges, strain indicators, extensometer.
4. Prepare and compare Soil classification chart as per IS and ASTM or 3 Phase system.
5. Writing and Collecting test report formats by consulting industry on various construction materials other than given experiments.
6. Collecting Specifications of various materials and correlate with standards.
7. Collecting and study of various IS codes regarding testing of materials.
8. Spread sheet of concrete mix design template
9. Collection of minimum compression strength values and water cement ratio of concrete used for different structural components from IS codes
10. Tests on grouting and its applications
11. Comparative study of M-sand with Natural sand
12. Tools and equipment with pictorial presentation chart
13. Finding unit weight of various diameters of HYSD and TMT steel and compare with theoretical calculations.
14. Model of plate load test.
15. Water absorption test on Fine and coarse aggregate.
16. Field tests on various building materials such as cement, sand, brick etc as per codes.
17. A study of local soils for rammed earth construction
18. Study of strenght and properties of eucalyptus as a truss material
19. Rammed earth wall
20. Role of geo synthetic in the improvement of strength of soil
21. Compressive strength characteristics of stacked stabilised soil cement blocks
22. Strength properties of bhalki soil
23. Stabilization of soft soils using industrial wastes
24. Study of strength parameters of silica fume concrete
25. Study on infiltration rate on different soils of your city/town/locality
26. Effect of ph on physical properties of fine-grained soils
27. A study of laterite particles in adsorption of oil and grease

NOTE

1. Students should select any one of the above or other topics relevant to the subject approved by the concerned faculty, individually or in a group of 3 to
2. Students should mandatorily submit a written report and make a presentation on the topic. The task should not be repeated among students. Report will be evaluated by the faculty . Weightage for 5 marks Internal Assessment shall be as follows: (Unsatisfactory 1, Developing 2, Satisfactory 3, Good 4, Exemplary 5)
3. Reports should be made available along with bluebooks to IA verification officer

Course Delivery:

The course will be delivered through lectures and Power point presentations/ Video/ demonstration / Practices/ Site visits / Expert lectures.

Text Books:

1. Timoshenko and Young, Strength of Materials -Vol II, Von Nastrand Company, New York
2. Laboratory Manual prepared by the Department
3. Shetty M.S, ‘Concrete Technology S. Chand & Co. Ltd, New Delhi.
4. Mehta P.K, ‘Properties of Concrete Tata McGraw Hill Publications, New Delhi
5. Reference Books:
6. Neville AM, ‘Properties of Concrete ELBS Publications, London.
7. Relevant BIS codes.

Reference Books:

1. Concrete Technology By MS Shetty (S. Chand Publication 16 Edition)
2. IS Codes
1. IS 8112:1989 -43 Grade OPC Specification
2. IS-4031-PART-2
3. IS 12269:1987 -53 Grade OPC Specification
4. IS 1489(PART -I) :1991- Portland Pozzolona Cement Specification
5. IS 383:1970 – Specification for Coarse & fine Aggregate for Concrete
6. IS 456 :2000 – Pain & RCC Code of Practice
7. IS 1786:1985 – Specification for HYSD Steel bars & wires for RCC
8. IS 2185 PART-I:1979-Specification for Concrete masonry units Hollow & Solid Concrete Blocks
9. IS 1077 :1992 – Common Burnt Clay Building Bricks Specifications
10. IS 2720 Part III – Determination of water contents of Soil
11. IS 2720 Part IV – Grain size analysis of Soil
12. IS 2720 Part V- Determination of Liquid limits & Plastic Limits of Soil
3. Material Testing Lab Manual – Gambir.
4. Soil Testing Manual – HD Charan & KS Grover.
5. MORTH (Ministry Of Road Transport and Highways) Specifications

E-links

1. http://site.iugaza.edu.ps/mymousa/files/Material -Testing-lab-manual.pdf
2. http://www.technicalsymposium.com/CIVIL SEM5 CE2307LM.pdf
3. http://docslide.us/documents/som-bmt-lab-manual-final.html

SCHEME OF EXAMINATION

Material & Soil Testing Laboratory

1. Writing Procedure for a Question 10
2. Conduction of a Experiment 10
3. Tabulation/Calculation 10
4. Result / Conclusion 5
5. Viva 5
6. Task work 5
7. Record 5

LIST OF EQUIPEMENTS AND APPARATUS

1. Blaine’s permeability Apparatus 6
2. Density/specific Gravity Bottle 6
3. Vicat Apparatus with Accessories 6
4. Mortar cube Moulds 50mm2 ( 7.06×7.06 ) 6
5. Pycnometer 6
6. SievelO, 4.75, 2.36, 1.18mm, 600,300,150micron with lid & Pan(Concrete Fine agg) 2 sets
7. Measuring Jars of 1000, 500, 100, 10ml 3
8. Mechanical sieve Shaker for the above set of sieves 1
9. Sieve 80, 40, 20, 4.75 mm with Lid & Pan(Coarse Agg) 2set s
10. Measuring Cylinder(metal) 15 l, 250mm dia and 300mm height 3
11. Mechanical sieve Shaker for the above set of sieves 1
12. Slump Cone with accessories 3
13. Compaction factor testing machine 3
14. Concrete cube moulds150x150x150mm 6
15. Concrete cylindrical moulds150mm dia, 300mm height 3
16. Compression Testing Machine of 200 tonne capacity 1
17. Universal Testing Machine of 40 tonne capacity 1
18. Sieve 125, 90, 63, 45, 22.4, 13.2, 11.2 mm with Lid & Pan(Road aggregate) 2sets
19. Mechanical sieve Shaker for the above set of sieves 1
20. Los angels abrasion testing machine with charges 1
21. Impact testing machine with 12.5mm & 10mm Sieve with lid & pan 1
22. Digital weighing Balance 12 kg capacity with minimum 1 gm accuracy 3
23. Hot air Oven 1
24. Steel containers 10
25. Core cutter with dolly 3
26. Standard proctor compaction apparatus 2
27. Atterberg limits apparatus 2
28. Sieve100,63,40,20,,10,4.75,2 ,1 mm &600,425,212,150,75 micron with lid & pan (Soil test)c2
29. Rebound hammer 1
30. Ultra sonic pulse velocity kit 1
31. Strain gauage with stand 2
32. Strain indicator 1

For detail syllabus of all other subjects of BE Public Health, C15 scheme do visit Public Health 4th Sem syllabus for C15 scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.